• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.271-277
• /
• 2000

Transparent $TiO_2$ thin films were prepared by the sol-gel method from titanium alkoxide aqueous solution containing large quantities of water. To prepare the aqueous system sol, the chelate compound solution were prepared from each 1 mole of titanium(IV)iso-propoxide, acetylacetone and 8 moles of isopropyl-alcohol. And then the 50 moles aqueous solution with the 0.02~0.50 moles of HCI for sol stability and the 0.3 mole of polyethylene glycol for coating adhesion were precisely dropped on the chelate compound solution. $TiO_2$thin films were fabricated by dip coating, drying and heat treatment at $400^{\circ}C$ and their characteristics were investigated by XRD, SEM and UV-visible spectrometer, The neutral sol of composition with TTIP : AcAc : IPA : $H_2O$ : PEG : HCl = 1 : 1 : 8 : 50 : 0.3 : 0.15 (molar ratio) was maintained stable sol condition and without problem for coating more than 30 days. The anatase phase $TiO_2$thin film prepared from 30 times dipping, drying and heat treating showed the flat surface and the fine microstructure of fracture surface with about 2 $\mu\textrm{m}$ thickness. Transparency of these $TiO_2$thin film was 80 % in the visible region.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.5
• /
• pp.228-236
• /
• 2009

In this study, we investigated morphological characteristics of $SF_6$ clathrate hydrate crystals to understand its formation and growth mechanism. $SF_6$ clathrate hydrate crystals were formed in high-pressure reaction cell charged with pure water and $SF_6$ gas at constant pressure and temperature. Two-phase ($SF_6$ gas/aqueous solution) and three-phase ($SF_6$ gas/aqueous solution/$SF_6$ liquid) conditions were investigated, In both conditions, dendritic shape hydrate crystals were grown as like fibriform crystals along upward growth direction at the gas/aqueous solution interface. In the case of the reaction process of three-phase condition, when the $SF_6$ gas bubbles which were generated in $SF_6$ liquid phase due to the reduction of reaction cell pressure stuck to the gas/aqueous interfaces, the hydrate phase were appeared at the surface of the bubbles. This paper presents the detail growth characteristics of $SF_6$ hydrate crystals including crystal nucleation, migration, growth and interference.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.31-38
• /
• 2008

The objective of this work is to study transdermal delivery of levodopa using iontophoresis and evaluate various factors which affect the transdermal transport. Levodopa is unstable in aqueous solution, and, in order to establish a stable condition for levodopa for the duration of experiment, we investigated the stability of levodopa in aqueous solutions of different pHs with/without the addition of dextrose or the application of current. Using stable aqueous solution, we have studied the effect of pH, polarity and penetration enhancer (ethanol) on transdermal flux and compared the results. We also investigated the iontophoretic flux from hydroxypropyl cellulose (HPC) hydrogel. In vitro flux study was performed at $33^{\circ}C$, using side-by-side diffusion cell. Full thickness hairless mouse skin and rat skin were used for this work. Current densities applied were 0.4 or $0.6mA/cm^2$ and current was off after 6 hour application. Stability study showed that levodopa solution with a pH 2.5 or 4.5 maintained the initial concentration of levodopa for 24 hours with the addition of 5% dextrose. However, at pH 9.5, levodopa was unstable and 30 to 40% of levodopa degraded within 24 hours, even with the addition of 5% dextrose. Hydrogel swollen with dextrose added levodopa solution maintained about 97% of the initial concentration of levodopa for 13 days, when stored in $4^{\circ}C$. The application of current did not affect the stability of levodopa in hydrogel. Flux study from levodopa solution with pH 2.5 showed that cathodal delivery of levodopa was higher than passive or anodal delivery. When the pH of the donor solution was 4.5, anodal delivery of levodopa was higher than passive or cathodal delivery. These results seem to indicate that electroosmosis plays more dominant role than electrorepulsion in the flux of levodopa at pH 2.5, and the reverse situation applies for pH 4.5. The passive flux was unexpectedly high for the ionized levodopa. Similar to the results from aqueous solution, cumulative amount of levodopa transported trom HPC hydrogel by cathodal delivery was significantly higher than passive or anodal delivery. The treatment of 70% ethanol cotton ball by scrubbing increased passive, anodal and cathodal flux, with the largest increase for anodal flux. These results indicate that iontophoretic delivery of zwitterion such as levodopa is much complicated than that can be expected from small ionic molecules with single charge. The results also indicate that the balance between electroosmosis and electrorepulsion plays a very important role in the transport through skin.

• YAKHAK HOEJI
• /
• v.57 no.4
• /
• pp.258-264
• /
• 2013

Herbal medicine has been traditionally used in Asian countries for a long time. Many pharmacological effects are identified in the herbs and these herbs are believed to be safe for human. However, the safety or adverse effect of some traditional herbal medicines has not been established. We have chosen Cyperi rhizoma based on the Korea Herbal Pharmacopoeia and which have been widely used for an anti-inflammatory effect in Korea. The object of the study was to evaluate safety of Cyperi rhizoma in rats. The aqueous extract of Cyperi rhizoma was prepared according to the standard hot water extraction method of the Korea Pharmacopoeia. In the sub-chronic study, the aqueous extract of Cyperi rhizoma was orally administered once daily as 0, 125, 250, 500, 1000 and 2000 mg/kg/day to male and female F344 rats for 13 weeks. There were no treatment related abnormalities in mortality, clinical signs, food consumption, ophthalmologic examination, hematology, serum chemistry, urinalysis, gross observation, organ weight and histopathologic examination. In conclusion, The NOAEL (No Observed Adverse Effect Level) for Cyperi rhizoma aqueous extract was determined as more than 2000 mg/kg/day in the present experimental condition.

• Korean Journal of Organic Agriculture
• /
• v.19 no.1
• /
• pp.65-82
• /
• 2011

In order to evaluate the weed suppressing effect of Solanum viarum Dunal. In this study species diversity in patch of S. viarum and allelopathic effects of the aqueous extracts on S. viarum were investigated. Number of species and species diversity in site close to patch of S. viarum were decreased gradually 1site ($7.7{\pm}2.0,\;1.5{\pm}0.2$), 2site ($5.3{\pm}1.2,\;1.2{\pm}0.2$) and 3site ($4.0{\pm}1.7,\;0.9{\pm}0.1$). And total phenolic compounds of soil in survey area were increased gradually site1 ($0.16{\pm}0.01mg\;g^{-1}$), site2 ($0.17{\pm}0.01mg\;g^{-1}$) and site3 ($0.22{\pm}0.02mg\;g^{-1}$). So the number of species and species diversity (r=-0.692, P<0.05) were negatively correlated with increased total phenolic compounds of soil in the survey area. The relative germination ratio, the mean germination time, the relative elongation ratio, the fresh weight and the dry weight of receptor plants are generally getting decreased while the concentration of the aqueous extracts from S. viarum escalate. But every ratio was various depending on the growing regions, the kind of receptor plants and the treatment of the aqueous extracts. Especially, the radicle by injection of the aqueous extracts concentration of S. viarum was influenced more than the shoot on the same condition. The total phenolic compounds on region of S. viarum was gradually increased in stems (fresh $0.56{\pm}0.02mg\;g^{-1}$, dry $1.58{\pm}0.08mg\;g^{-1}$), roots (fresh $1.77{\pm}0.07mg\;g^{-1}$, dry $2.64{\pm}0.06mg\;g^{-1}$), leaves (fresh $6.01{\pm}0.14mg\;g^{-1}$, dry $7.04{\pm}0.29mg\;g^{-1}$), seeds (fresh $6.21{\pm}0.17mg\;g^{-1}$, dry $9.08{\pm}0.73mg\;g^{-1}$) in order. On the contrary, the negative correlation on germination and growth of receptor plants was shown by total phenolic compounds on the each parts of S. viarum. We think that the aqueous extracts of S. viarum showed allelopathic effects on other plants. Therefore, S. viarum holds the higher competitiveness in plant community in Jeju Island and makes possibility of application as natural herbicide.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2560-2566
• /
• 2012

The present study investigates how the thermal stability of retinol (vitamin A) encapsulated in polyester nanoparticles is influenced by the types of polyester used for the nanoparticles. A variety of polyester-retinol nanoparticles were prepared with various polyesters like: poly(ethylene adipate), PEA; poly(butylene adipate), PBA; poly(hexamethylene adipate), PHMA; and three polycaprolactones, PCL, of different molecular weights ($M_n$ ~10, 40, and 80K). The chemical stability of retinol in these nanoparticles, monitored in an aqueous solution at $25^{\circ}C$ and $40^{\circ}C$ for 4 weeks, was high in the following order of the nanoparticles prepared with PHMA > PCL 40K > PCL 10K > PCL 80K > PBA~PEA at $25^{\circ}C$ and PCL 10K > PCL 40K > PHMA > PCL 80K > PEA > PBA at $40^{\circ}C$. More importantly, this study has also found that the thermal stability of the retinol in the nanoparticles was closely connected with the melting temperatures of polyesters and polyester nanoparticles. The results were further discussed with possible factors - such as sample preparation condition (or history) and miscibility between the polyesters and retinol - affecting $T_m$ of the polyesters and the nanoparticles.

• Journal of Environmental Science International
• /
• v.8 no.3
• /
• pp.363-369
• /
• 1999

This study aimed to elucidate the relationship between theoretical parameters affecting the coagulation process and the real coagulation phenomenon applied to the dye wastewater. Emphasis was placed on the effective removal of the suspend particulates. Parameters studied in this study are pH, coagulant concentration and surface potential. Optimal dosages of coagulants by the measurement of the zeta potential at lower then $25^{\circ}C$ are 5\times$10^P-3}$ M of $FeCl_3 and 1.4\times10^{-6}M of Fe_2(SO_4)_3$. The results were well agreeded with the separate Jar-test results. Emphasis was also placed on the relationship between water quality and the content of SS. It was found that the COD and DOC were reduced to 65% and 85%, respectively. The turbidity at the above condition was reduced from 300 NTU to 0~1 NTU. Efforts were made to clarify the behavior of the suspend solid as affecting the water quality. 12,000~13,000 particles/10mL in $1~50\mu$m size range particulates in the raw wastewater were reduced to 300 particle/10mL in the same range after treatment. This research has proposed the methodology to find out the optimal condition of coagulation for small scale wastewater treatment plant or chemical coagulation process.

• Korean Journal of Materials Research
• /
• v.26 no.5
• /
• pp.246-249
• /
• 2016

Nickel powders were prepared under solvothermal condition by precipitation from metal nitrates with aqueous ammonium hydroxide. The powders were obtained at in a temperature range of $190-250^{\circ}C$ for 6h. The morphology and size of nickel powders were studied as a function of reaction temperature. The synthesis of nickel crystalline particles is possible under a solvothermal conditions in ethylene glycol solution. Characterization of the synthesized nickel powders were studied by XRD, SEM(FE-SEM) and TG/DSC. X-ray diffraction analysis of the synthesized powders indicated the formation of nickel structure after reaction. The average crystalline sizes of the synthesized nickel powders were in the range of 200-1000 nm; and the distribution of the powders was broad. The shape of the synthesized nickel particles was almost spherical. The morphology of synthesized nickel powders changed with reaction condition. It was possible to synthesize nickel powders directly in ethylene glycol without reducing agent.

• Korean Journal of Materials Research
• /
• v.21 no.3
• /
• pp.149-155
• /
• 2011

We investigated tribological characteristics of diamond-like carbon (DLC) in a condition with carbon nanotube (CNT) content of 1wt% in aqueous solution. Si-DLC films were deposited by radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) process on Al6061 aluminum alloy. In this study, the deposition of DLC films was carried out in vacuum with a chamber pressure of 10-5 to 10-3 Torr achieved by mechanical pump followed by turbo molecular pump. The surface adsorbed oxygen on the Aluminum substrates was removed by passing Ar gas for 10 minutes. The RF power was maintained at 500W throughout the experiment. A buffer layer of HMDSO was deposited on the substrate to improve the adhesion of DLC coating. At this point CH4 gas was introduced in the chamber using gas flow controller and DLC coating was deposited on the buffer layer along with HMDSO for 50 min. The thickness of 1 ${\mu}m$ was obtained for DLC films on aluminum substrates The tribological properties of as synthesized DLC films were analyzed by wear test in the presence of dry air, water and lubricant such as CNT ink.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.3
• /
• pp.7-12
• /
• 2013

In Die casting process, the problem of die degradation is often issued. In oder to increase of die life the material degradation of die steel was investigated using test core pins. Three test core pins were positioned in front of the gate entry and observed washout and soldering resistance during Mg die casting process. The test parameters are set as different commercial die materials, coatings condition and hardness of die surface. Usign 220t magnesium die casting machine was employed to cast AZ91 magnesium alloys. After 150 shots, macroscopic observation of die surface was carried out. Additional 50 cycles later, test pins were chemically cleaned with 5% HCl aqueous solution to find out the existence of washout and soldering layers. Microstructural characterization of die surface and the die roughness measurement were performed together. Computational simulation using AnyCasting program was also beneficial to correlate the extent of die damage with the position of test pin inside die cavity. As results, the optimal combination of die steel with productive coating as well as its hardness was drawn out. it will be helpful to decide the material and condition considering increasing of tool life.