• Journal of the Korean Ceramic Society
• /
• v.36 no.7
• /
• pp.705-710
• /
• 1999

Stability and chemical durability for aqueous casting of BaTiO3 slurry with polycarylic acid(PAA) were studied. PAA was well chemisorbed on surface of BaTiO3 powder at neutral pH but did not chemically adsorbed at low pH. The amount of Ba dissolution in aqueous BaTiO3 slurry was abruptly increased at strong acid pH2 and also at high amount of PAA. Protection of Ba dissolution and stability of slurry could be obtained through the optimization of slurry conditions such as pH amount of surfactant and solid content.

• Corrosion Science and Technology
• /
• v.15 no.1
• /
• pp.13-17
• /
• 2016

The aim of this study was to evaluate the use of iron-nickel oxide ($Fe_2O_3$.NiO) nanopowder (FeNi) as an anti-corrosion pigment for a different application. The corrosion protection ability and the mechanism involved was determined using aqueous solution of FeNi prepared in a corrosive solution containing 3.5 wt.% NaCl. Anti-corrosion abilities of aqueous solution were determined using electrochemical impedance spectroscopy (EIS) on line pipe steel (API 5L X-80). The protection mechanism involved the adsorption of metallic cations on the steel surface forming a protective film. Analysis of EIS spectra revealed that corrosion inhibition occurred at low concentration, whereas higher concentration of aqueous solution produced induction behavior.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.17 no.1
• /
• pp.25-31
• /
• 2009

Supercooled type ice storage system with aqueous solution (or water) may have trouble with non-uniform release of supercooling even though it contributes to the simplicity of system and ecological improvement. The non-uniform release increases the instability of the system because it may cause an ice blockage in pipe or cooling part. In order to suppress the release of the supercooling, a cooling experiment was tried to an ethylene glycol(EG) 3 mass% solution corresponding with pressurization. Also, the frequency ratio of the release of the supercooling was measured to the pressurization from 101 to 505 kPa. At results, the frequency ratio of supercooling release tends to decrease as the pressure of the aqueous solution increased in each cooling rate. Moreover, it tends to decrease as the cooling rate of the solution decreased in each pressure.

• Journal of the Korean Chemical Society
• /
• v.57 no.6
• /
• pp.684-690
• /
• 2013

Since a glycerol molecule has three active sites, two ${\alpha}$ and one ${\beta}$ hydroxyl groups; it undergoes condensation by releasing water molecules to produce linear, nonlinear and heterocyclic oligomers. The Gibbs free energy (G), enthalpy (H) and internal energy (E) of 7 diglycerol, 15 triglycerol and 23 tetraglycerol isomers were calculated at B3LYP level of theory using 6-311++G(d, p) basis set, in both gas and aqueous phases. Linear oligomers, ${\alpha}{\alpha}$-diglycerol, ${\alpha}{\alpha}$, ${\alpha}{\alpha}$-triglycerol and ${\alpha}{\alpha}$, ${\alpha}{\alpha}$, ${\alpha}{\alpha}$-tetraglycerol, were found to be the most stable oligomers in aqueous phase. It was found that the stability of cyclic oligomers decreases as the size of their rings increases. Cyclic oligomers are produced by dehydration of the acyclic ones which is an endothermic reaction while its ${\Delta}G$ is negative. The dehydration reaction is less endothermic in aqueous phase.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.589-592
• /
• 1999

Suspension cultures of Digitalis lanata were successfully performed in an aqueous two-phase system (ATPS) of 4.5％ polyethylene glycol (PEG) 20,000 and 2.8％ crude dextran. Cell growth in the medium containing an individual ATPS-forming polymer was inhibited due to the toxicity of PEG and a high viscosity of dextran. Formation of ATPS supported cell growth by showing a considerably decrease in viscosity and partitioning of cells into a PEG-lean dextran phase. It was found that an aqueous two-phase cultivation of plant cells in a stirred tank bioreactor could be successfully applied.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.268-271
• /
• 2005

Etch resistance of mask layer on silicon substrate modified by AFM-based Tribo-Nanolithography (TNL) in Aqueous Solution in an aqueous solution was demonstrated. n consists or sequential processes, nano-scratching and wet chemical etching. The simple scratching can form a mask layer on the silicon substrate, which acting as an etching mask. For TNL, a specially designed cantilever with diamond tip, allowing the formation of mask layer on silicon substrate easily by a simple scratching process, has been applied instead of conventional silicon cantilever fur scanning. This study demonstrates how the TNL parameters can affect the etch resistance of mask layer, hence introducing a new process of AFM-based maskless nanolithography in aqueous solution.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.9
• /
• pp.748-751
• /
• 1994

Poly(ethylene oxide) (PEO) in aqueous solutions has a hydrophobic character which can induce the hydrophobic interaction between its nonpolar parts. The hydrophobic properties of aqueous PEO solutions are studied by the viscometry in terms of the water structure-making and -breaking capabilities of added solutes of ureas. The results show that the contracted conformation of PEO of low molecular weight, namely poly(ethylene glycol) (PEG), does not result from the hydrophobic interaction between the nonpolar parts of PEO but it can participate in a hydrophobic interaction between the nonpolar parts of PEO and added ureas solutes with nonpolar groups, which can induce a large hydrodynamic volume and increase the viscosity. On the other hand, the PEO of large molecular weight seems to behave like any other water soluble polymers with nonpolar parts and its conformation in aqueous solutions is well explained in terms of water structure perturbing capabilities of added ureas.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.9
• /
• pp.1049-1055
• /
• 1999

Electrochemical oxidation of silicon (p-type Si(100)) at room temperature in ethylene glycol and in aqueous solutions has been performed by applying constant low current densities for the preparation of thin SiO2 layers. In-situ ac impedance spectroscopic methods have been employed to characterize the interfaces of electrolyte/oxide/semiconductor and to estimate the thickness of the oxide layer. The thicknesses of SiO2 layers calculated from the capacitive impedance were in the range of 25-100Å depending on the experimental conditions. The anodic polarization resistance parallel with the oxide layer capacitance increased continuously to a very large value in ethylene glycol solution. However, it decreased above 4 V in aqueous solutions, where oxygen evolved through the oxidation of water. Interstitially dissolved oxygen molecules in SiO2 layer at above the oxygen evolution potential were expected to facilitate the formation of SiO2 at the interfaces. Thin SiO2 films grew efficiently at a controlled rate during the application of low anodization currents in aqueous solutions.

• Journal of Ginseng Research
• /
• v.19 no.2
• /
• pp.153-159
• /
• 1995

Roasting ginseng marc was roasted at different temperatures (140, 170, 200, 23$0^{\circ}C$) and for different periods (10, 20, 30 min) produced aqueous soluble brown pigments, gel filtration of which over Sephadex G-50 yielded 3 fractions A, B, C. The treatment at higher temperature and for longer time lead to increase of peak A and decrease of peak C. The contents of the brown pigments and the degree of brown color increased about 4 times and over 6 times, respectively, by roasting at 23$0^{\circ}C$ and for 30 min as compared to the control. 5-Hydroxymethyl furfural in aqueous and 50% ethanol extracts of treated samples at 23$0^{\circ}C$ and for 30 min was increased to 3.6 times and 8 times, respectively, and carbonyl compound in both aqueous and 50% ethanol extracts was increased 3 times. Also pyroxene-like substance was increased apparently in both aqueous and 50% ethanol extracts of treated samples.

• Bulletin of the Korean Chemical Society
• /
• v.4 no.5
• /
• pp.231-234
• /
• 1983

The stability constant for the complex of $UO_2^{2+}$ with a macrocyclic aminoether ligand, 1,7,10,16-tetraoxa-4,13-diazacyclooctadecane, has determined in aqueous solution. The conductivity and pH metric measurements suggest that the ligand forms a stable 1:1 complex with $UO_2^{2+}$ ion, and the complex is an ionic form, $UO_2L^{2+}$, in aqueous solution. The fact that the ligand does not form a complex with lanthanides, such as $Ce^{3+}$, $Sm^{3+}$, and $Nd^{3+}$ ions, in aqueous solution suggests a possibility of separation of the lanthanide elements from uranium matrix using the macrocyclic aminoether ligand.