• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.877-886
• /
• 2019

The size of the subway entrance should be calculated according to the user's demand, but Korea has the same size for each entrance by applying a uniform value. Recently, the installation of mobile convenience facilities such as escalators, elevators, etc. is mandated by the traffic weakness promotion law, but it is inconvenient to use the existing stations because it is mainly arranged in the place where it can be installed regardless of user demand. This study aims to establish a model for estimating the size of mobile convenience facilities by predicting the use demand of each station entrance so that the location and size of mobile facilities can be reflected in the design or construction of the station. To this end, a multiple regression model was established to forecast daily demand by utilizing the demand for getting on and off by station and the building association area for each purpose around the railway station. The actual data of Dongdaemun and Jonggak Stations were used to verify the estimated model. In addition, the escalator installation scale was compared / analyzed by doorway using domestic and overseas escalator equations. As a result, it was more accurate to estimate the usage demand for a single station. Also, Jonggak Station has an up and down escalator installed at exit 1, but it was analyzed that it is appropriate to install at exit 4. This study is an advanced form of the essay model for estimating the users of the entrance and exit users of urban railway stations published in 2018. In addition, it seems to be the basis of the current escalator installation criteria.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1612-1612
• /
• 2001

The production of grain for export and domestic use is one of Australia's most important agricultural industries, and the NIR technique has been used extensively over many years for the routine monitoring of grain quality, particularly moisture and protein content. Because most Australian grain is intended for human food production, the determinants of grain quality for livestock feed, apart from protein, have been largely ignored. However the increasing use of grain for feeding to pigs, poultry, beef cattle and dairy cows has led to an important national research project entitled “Premium Grains for Livestock”. Two of the objectives of this project are to determine the compositional and functional characteristics of grains which influence their nutritional quality for the various classes of livestock, and to adopt rapid and objective analytical tests for these quality criteria. NIR has been used in this project firstly to identify a set of grain samples from a large population of breeders' lines which showed a wide spectral variation, and hence a potentially wide variation in nutritional value. The selected samples were not only subjected to an extensive array of chemical, physical and in vitro analyses, but also were grown out to produce sufficient quantities of grain to feed to animals in vivo studies. Additional grains were also strategically selected from farms in order to include the effect of weather damage, such as rain, drought and frost. In this study to date, NIR calibrations have been derived or attempted, on both ground and whole grains, for in vivo dry matter digestibility (DMD), pepsin-cellulase dry matter disappearance, protein, fat, acid detergent fibre, neutral detergent fibre, starch, in sacco DMD and in vitro assays to simulate starch digestion in the lumen and small intestine. Results so far indicate high calibration accuracy for chemical components (SECV 0.3 to 2.6%) and very promising statistics for in vivo DMD (SECV 1.8, $R^2$ 0.93, SD 7.0, range 61.9 to 92.3, n=60). There appears to be some potential for NIR to estimate some in vitro properties, depending upon the accuracy of reference methods and appropriate sample populations. Current work is in progress to extend the range of grains with in vivo DMD values (a very laborious and expensive process) and to increase the robustness of the various NIR calibrations, with the aim of implementing uniform testing procedures for nutritional value of grains throughout Australia.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.1
• /
• pp.9-18
• /
• 2015

Software Reliability Growth Models (SRGMs) are useful for determining the software release date or additional testing efforts by using software failure data. It is not appropriate for a SRGM to apply to all software. And besides a large number of SRGMs have already been proposed to estimate software reliability measures. Therefore selection of an optimal SRGM for use in a particular case has been an important issue. The existing methods for selecting a SRGM use the entire collected failure data. However, initial failure data may not affect the future failure occurrence and, in some cases, it results in the distorted result when evaluating the future failure. In this paper, we suggest a method for selecting a SRGM based on the evaluation goodness-of-fit using partial data. Our approach uses partial data except for inordinately unstable failure data in the entire failure data. We will find a portion of data used to select a SRGM through the comparison between the entire failure data and the partial failure data excluded the initial failure data with respect to the predictive ability of future failures. To justify our approach this paper shows that the predictive ability of future failures using partial data is more accurate than using the entire failure data with the real collected failure data.

• The Journal of Internal Korean Medicine
• /
• v.39 no.3
• /
• pp.372-388
• /
• 2018

Objective: This study evaluates the effectiveness and safety of moxibustion for benign prostatic hyperplasia (BPH). Methods: Using the keywords "benign prostatic hyperplasia", "benign prostatic hypertrophy", "benign prostatic enlargement", "prostatic hyperplasia", and "moxibustion", we searched papers in numerous databases, including National Discovery for Science Leaders (NDSL), Korean Traditional Knowledge Portal (KTKP), Oriental Medicine Advanced Searching Integrated System (OASIS), Research Information Sharing Service (RISS), PubMed, Embase, and CENTRAL. The search range included randomized controlled trials (RCTs). Papers not matched with inclusion criteria were excluded. The methodological quality of each RCT was assessed using the Cochrane risk-of-bias tool. Where appropriate, meta-analyses were performed. Results: Initially, 77 studies were found. Of these, 11 duplicate studies were removed and 27 were excluded following title and abstract screening. After the remaining 39 papers were scanned, 13 RCTs were selected and analyzed. Among these 13 RCTs, five compared moxibustion therapy and oral medication, seven compared moxibustion plus acupuncture therapy and oral medication, and one compared moxibustion plus acupuncture therapy and sham-moxibustion. The meta-analysis showed positive results for the use of moxibustion therapy in terms of International Prostate Symptom Score (IPSS), Quality Of Life (QOL), Maximum Flow Rate (Qmax), Prostate Volume (PV), and the efficacy rate. The meta-analysis showed positive results for the use of moxibustion plus acupuncture therapy in terms of IPSS, QOL, and the efficacy rate. Conclusions: This meta-analysis of clinical trials suggests that moxibustion is effective intreating BPH patients. The results of this study could be applied to clinical treatment of BPH. However, additional large-scale clinical researches should be conducted.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.4 no.1
• /
• pp.29-65
• /
• 2009

This study is The Effect of the on the purchase behavior of the Software Quality. To have purchased the software in a Consumer surveys were conducted. The following is a summary of results of this research. First, the software quality and significant consumer purchasing behavior (+) of influence. Functionality, usability, portability of software quality attributes the impulse buying and buy more of both the (+) showed the influence. Second, software quality is urge consumers to purchase significant (+) of influence. Functionality, reliability, usability, portability of software quality (+) showed the influence. Third, the software quality In the consumer buy more significant Chung (+) showed the influence. Software quality, functionality, usability, portability name (+) influence. In conclusion, the quality of the software in consumer purchasing behavior (+) were of significant influence. In particular, factors that functionality, usability factors, portability factor in the relatively large influence on the purchasing behavior. Software technology development, planning, development, testing, and in each step must keep in mind the following. First, the software, when used in certain conditions, Inherent ability to meet the needs and requirements set forth to provide the appropriate functionality and accuracy as the ability of software products each other with the capabilities to the effective and thorough security features should be required. Second, software, a user-specified criteria to use in understanding and learning, and must, and the ability to prefer. Software for users to understand and easy to use, whether the check. In particular, understanding the interface, Help understanding, understand the input and output data, and interface consistency, the user information, the message must be equipped and easy to understand. In addition, ease of learning to be self-learning, and help ease of access shall be required. Third, in certain circumstances, a different environment to transfer be equipped with the functionality of the software. Applying data structures and application environment, helping transplant convenience must keep in mind sex.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.60-68
• /
• 2016

In this study, earlier analyzed tetrapod, one of an original group of offshore constructions studied for manufacturability of the concrete using the properties of steel making slag aggregate. steel making slag aggregate assessment, RCS and Blast Furnace Slag : the 20 mm air-cooled slag and combinations by 50 %, aggregate properties on the most appropriate for the properties of recycled aggregate concrete optimal mix, and assessing it. Properties of concrete used to be derived are judged as to bury the studies show that the hollowing-out of the RCS, plastic sole use is in the workability of the aggregate, plastic in the 20 mm slag also assessed to be a slight disadvantage, but RCS by mixing air-cooled coarse and 50 percent to 20 percent 50 mm. Thus, steel making slag marine structures using recycled aggregate, in rapid chilled slag or air-cooled slag. The sole use of the aggregate them than to combine the aggregate of concrete. After they satisfy the quality standard quality shall be used will aggregate steel making slag who meet the criteria concrete manufacturing in general or par with the aggregate of concrete. Performance was assessed as to develop a more than that.

• Journal of Korean Elementary Science Education
• /
• v.43 no.3
• /
• pp.446-459
• /
• 2024

This study aims to examine the development and learning process of the argumentative abilities in elementary school students with regards to learning science. Toward this end, the SSI argumentation education program was implemented in conjunction with the science curriculum for sixth-grade students across 10 months. In this process, the scoring criteria in terms of formal and content aspects were developed and used to assess their argumentative text analysis and expression abilities. The results were as follows: First, the type of SSI influenced their ability to analyze argumentative texts. However, their formal and content aspects improved as learning progressed. Second, with regards to the formal aspect associated with the ability to express argumentative texts, reasons were initially most frequently cited. Over time, incorporating evidence to support these reasons and the use of rebuttal also increased. Third, in terms of content aspect, the level of use of all elements increased as learning progressed; however, level of acknowledgments and rebuttal elements exhibited a relatively slower progress. In summary, ability of the students to analyze and express argumentative texts improved as they increasingly gained experience in learning about argumentation. The study deduced that elementary school students can develop their argumentative abilities through appropriate learning support, such as teacher feedback, along with implementation of the SSI argumentation education program over an extended period. Based on these results, the study proposes the development of SSI materials and incorporation of SSI argumentative writing in the science curriculum.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.103-113
• /
• 2020

Jack-up drilling rigs are widely used in the offshore oil and gas exploration industry. Although originally designed for use in shallow waters, trends in the energy industry have led to a growing demand for their use in deep sea and harsh environmental conditions. To extend the operating range of jack-up units, their design must be based on reliable analysis while eliminating excessive conservatism. In current industrial practice, jack-up drilling rigs are designed using the working(or allowable) stress design (WSD) method. Recently, classifications have been developed for specific regulations based on the load and resistance factor design (LRFD) method, which emphasises the reliability of the methods. This statistical method utilises the concept of limit state design and uses factored loads and resistance factors to account for uncertainly in the loads and computed strength of the leg components in a jack-up drilling rig. The key differences between the LRFD method and the WSD method must be identified to enable appropriate use of the LRFD method for designing jack-up rigs. Therefore, the aim of this study is to compare and quantitatively investigate the differences between actual jack-up lattice leg structures, which are designed by the WSD and LRFD methods, and subject to different environmental load-to-dead-load ratios, thereby delineating the load-to-capacity ratios of rigs designed using theses methods under these different enviromental conditions. The comparative results are significantly advantageous in the leg design of jack-up rigs, and determine that the jack-up rigs designed using the WSD and LRFD methods with UC values differ by approximately 31 % with respect to the API-RP code basis. It can be observed that the LRFD design method is more advantageous to structure optimization compared to the WSD method.

• Journal of Environmental Policy
• /
• v.11 no.2
• /
• pp.3-16
• /
• 2012

Objectives of the Korean Environmental Conservation Value Assessment Map (ECVAM) is to evaluate environmental value used in comprehensive environmental information in order to encourage eco-friendly land use and management. The first research was conducted in 2001 to establish the evaluation items and the criteria of the ECVAM, and the first nationwide map was established in the period of 2003 to 2005. The maps are updated annually to reflect environmental changes of land. The evaluation items and the criteria have been modified based on feasibility studies to improve the accuracy of the maps. This study re-evaluated the ECVAMs from 2005 to 2010 with criteria used in current environment and analyzed the changes in the area of the maps in 6 years. This is also an investigation on the maps whether they are appropriate as an index for sustainable environmental monitoring. The result shows that the 1st grade level of the ECVAM area with the highest conservation value had been expanding since 2005. These changes were analyzed in terms of updating the 4th Forest Map (2008) produced once every 10 years, reflecting the new legal protected areas such as Baekdudaegan Protected Area(2010), and the environmental/ecological assessment items such as the National Ecological Network (2009). This mean the ECVAM are a monitoring index that integrates individual environmental indexes including the increase of forest age and diameter due to sustainable management of forest areas, and the change of conservation areas. Therefore, ECVAM can be used as a new index integrating national environmental indicators for monitoring changes of national environment and policy. In order to utilize the ECVAM, improving accuracy and reducing renewal cycle time of thematic maps are required.

• The Journal of KAIRB
• /
• v.6 no.1
• /
• pp.5-16
• /
• 2024

Purpose: The purpose of this study is to investigate the current status of pediatric assent in nationwide hospitals and to assess the children's comprehension for pediatric assent by interviewing pediatricians/pediatric neurologists to determine whether children of the age (elementary and middle school students) can understand the purpose, risks, benefits, and concepts of voluntary participation in clinical research described in the assent form, and to help improve the administrative efficiency of multicenter clinical trials. Methods: The status of pediatric assent was surveyed online using Google Forms at 141 university hospitals with administrative staff who are members of the Institutional Review Board (IRB) administrative staff subcommittee with in Korean Association of Institutional Review Boards (KAIRB). Additionally, face-to-face interviews were conducted with 7 pediatricians/pediatric neurologists. Survey and interview responses were summarized using descriptive statistics. Results: Out of the 141 institutions surveyed, 35 institutions (24.8%) responded. Among them, 30 institutions (85.7%) reported having age criteria for acquiring pediatric assent forms in the case of children. The age range for pediatric assent acquisition have been from 7 years old to 12 years old (15 institutions, 50%), and from 7 years old to 15 years old (7 institutions, 23.3%). Nine institutions (25.7%) have had criteria for obtaining both parents' consent in cases involving the participation of children. Nineteen institutions (54.3%) have had checklists or guidelines available for use by IRB members in study protocols involving vulnerable research subjects. Three pediatricians/pediatric neurologists have believed that upper-grade elementary school students (5th-6th grade) could comprehensively understand informed consent forms. Two have believed that middle school students would be able to understand them if they included personal information. Two pediatricians/pediatric neurologists have believed that even lower-grade elementary school students (1st-4th grade) could understand the explanations if they were made simpler. Conclusion: It is suggested that not only elementary school students (7-12 years old) but also middle school students (13-15 years old) should receive pediatric assent forms, as it would facilitate a comprehensive understanding of the forms. To enhance the comprehension of assent form content, it is necessary to use age-appropriate words, language, and expressions in the forms hospital. It is also recommended to create comics or videos to make the content of the assent forms more accessible for children.