• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.83-84
• /
• 2009

Thin film solar cells based on CIGS continue to be a leading candidate for thin film photovoltaic devices due to their appropriate bandgap, long-term stability, and low-cost production. To date, the most successful technique for the deposition of a CIGS absorber layer has been based on the co-evaporation However, the evaporation process is difficult to scale-up for large-area manufacturing the sputtering and Selenizaton process has been a promising method for low-cost and large-scale production of high quality CIGS In this study, we have used Cu and CuIn alloy targets for precursor deposition the precursor deposited by sputtering Cu and CuIn targets and $CuInSe_2$ thin film is manufactured by Selenization process

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.676-679
• /
• 2007

This paper describes an experiment facility to measure the circulation characteristics of a water/steam receiver at various heat fluxes. The natural circulation type receiver was considered in this study. The experiment facility was designed to satisfy circulation balance with an appropriate scale down. As a result, riser tube inner diameter was 7.4 mm and water circulation was 0.319 kg/s. Downcomer tube inner diameter by circulation balance was 9.52 mm and the quality was from 0 to 0.23.

• 대한수학회보
• /
• 제49권6호
• /
• pp.1131-1145
• /
• 2012

The purpose of this paper is to use an appropriate variational framework to discuss the boundary value problem with p-Laplacian type operators $$\{({\alpha}(t,x^{\Delta}(t)))^{\Delta}-a(t){\phi}_p(x^{\sigma}(t))+f({\sigma}(t),x^{\sigma}(t))=0,\;{\Delta}-a.e.\;t{\in}I\\x^{\sigma}(0)=0,\\{\beta}_1x^{\sigma}(1)+{\beta}_2x^{\Delta}({\sigma}(1))=0,$$ where ${\beta}_1$, ${\beta}_2$ > 0, $I=[0,1]^{k^2}$, ${\alpha}({\cdot},x({\cdot}))$ is an operator of $p$-Laplacian type, $\mathbb{T}$ is a time scale. Some sufficient conditions for the existence of constant-sign solutions are obtained.

• Journal of the Optical Society of Korea
• /
• 제16권1호
• /
• pp.29-35
• /
• 2012

We propose a subpixel scale elemental image generation method to correct the errors created by finite display pixel size in integral imaging. In this paper, two errors are mainly discussed: pickup-and-display mismatch error and mismatch error between pixel pitch and lens pitch. The proposed method considers the relative positions between lenses and pixels in subpixel scale. Our proposed pickup method calculates the position parameters, generates an elemental image with pixels completely inside the lens, and generates an elemental image with border pixels using a weighted sum method. Appropriate experiments are presented to verify the validity of the proposed method.

• Child Health Nursing Research
• /
• 제17권4호
• /
• pp.222-229
• /
• 2011

Purpose: This study was conducted to determine the predictors of cultural sensitivity for nursing students in Korea. Methods: The participants in this study were 332 nursing students. Data collection was conducted through the use of questionnaires which were constructed to include a Cultural Sensitivity Scale, Knowledge of Culture, Interpersonal Reaction Index, and Self-efficacy Scale. Results: Results showed that cultural sensitivity of nursing students was middle range. Knowledge level of culture was very low. There was a significant positive correlation between cultural sensitivity and knowledge of culture, empathy, and self-efficacy. The significant factors influencing cultural sensitivity of nursing students were empathy, self-efficacy, experience of an overseas trip and awareness of cultural education. These four factors explained 23.8% of the variance in cultural sensitivity of nursing students. Conclusion: These results indicate that cultural sensitivity is an important link with empathy and self-efficacy in nursing students. For nursing students to enhance cultural sensitivity, a transcultural nursing curriculum needs to develop for appropriate and effective services in cross-cultural situations of the multicultural families in Korea.

• 플랜트 저널
• /
• 제7권3호
• /
• pp.48-64
• /
• 2011

In this work, risks in EPC project for overseas power plant projects are analyzed and risk management methods are suggested to reduce cost and to shorten time. 79% of risks occurred in the engineering phase for S project located in South-East Asia. The impact scales of risks on major project objectives which are cost, time, scope, and quality are analyzed as 3.5, 3.8, 2.7, and 3.7, respectively. The level of impact scales is very similar to each other except the impact scale of scope. The risk management methods suggested in this study have to be applied at the appropriate time to manage risks effectively. After that, risks are managed continuously by monitoring.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.61-65
• /
• 2008

Because of the high increasing rate of load demand, these days the necessity of deciding what optimum reserve level is appropriate to most stably supply electricity is being emphasized. This research studies the downward tendency of reverve ratio by analyzing the trend of change of the network scale, reserve, and reserve ratio while optimum reserve has been increased as the network system scale grow up. This means, at this moment 6,000MW is optimum level for short term prospect of power supply and demand. And also, it has been analyzed that, as the annual peak load exceeded 50,000MW, confirming the amount of optimum reserve level is more stable than keeping 10 to 12% reserve ratio.

• 한국물환경학회지
• /
• 제23권6호
• /
• pp.872-880
• /
• 2007

For effective management of sediment-related diffuse pollution, it is of utmost importance to estimate spatial variation of sediment transport processes within a catchment. A mathematical model can play a critical role in estimating sediment transport processes at the catchment scale provided that the model structure is appropriate for representing major sediment transport processes of the catchment of interest. This paper introduces a distributed catchment model River Basin Water Quality Simulator (RBWQS) and presents some results of its application to a small rural catchment in Korea. The model has been calibrated and validated for a wet period using hourly hydrographs and sediment concentrations observed at the catchment outlet. Based on the model simulation results, the spatial variation of sediment transport processes across the catchment and the effects of paddy fields and small reservoirs on hydrology and sediment transport have been analyzed at the catchment scale.

• 한국음향학회지
• /
• 제19권5호
• /
• pp.71-78
• /
• 2000

Quickness and precision are the two most important requirements for an industrial scale used in production lines. In this paper, a new approach, "Mass-estimation algorithm by vibration-response measurement of dynamic balance", is presented to improve some of drawbacks in conventional scales. The system, consisted of velocity and displacement sensors, spring scale, analog-digital converter and microcomputer, is based on full utilization of dynamic mass measurement of velocity and displacement via microcomputer-assisted real time monitoring. The resulting system, when combined with appropriate mass estimation algorithm software, has shown its effectiveness in terms of two desirable characteristics required.

• International Journal of Railway
• /
• 제4권1호
• /
• pp.5-11
• /
• 2011

The purpose of the present study is to develop conceptual design of a railway vehicle simulator based on a scaled model. Although the scaled simulator is limited in its ability to manipulate the full dynamics of a full-size railway vehicle, it has been known to have an advantage in that it could provide means of testing the fundamental dynamic behavior within a limited laboratory space and at low operation cost. The present study proposes a design strategy for a simulator so that a small scaled roller rig could be fabricated and operated in laboratory setting based on the design philosophy. The data obtained from experimental testing using a scale model can be used to verify and interpret the dynamic performance of full-scale railway vehicle by applying appropriate non-dimensional analysis.