• 한국건축시공학회지
• /
• 제22권1호
• /
• pp.11-21
• /
• 2022

현재 국내 건설 산업분야에서 코로나 사태 장기화로 인한 기능공 인력부족, 공기단축 및 인건비 감소를 통한 경제성 확보 등을 해결하기 위하여 프리웨브 공법에 대한 중요성이 대두되고 있다. 그 공법의 일환으로서, 이 연구에서는 공장에서 강판 거푸집 제작하고 철근 선조립하여 현장 반입한 후 현장 타설하는 SY 비탈형 보거푸집을 대상으로 하중재하에 따른 휨거동을 평가하고자 하였다. SY Beam 표준단면 형상은 MIDAS GEN 프로그램에 의한 구조모델링 통해 결정된 단면 치수 폭 400mm, 춤 600mm을 적용하였다. 총 6개의 실험체를 부재길이 5,000mm로 하여 강판두께(0.8, 1.0, 1.2mm)를 변수로 실험체 5개와 비교군 RC 실험체 1개를 실대형으로 제작하여 휨 실험을 수행하였다. 휨 실험결과, 강판데크가 항복하면서 높은 초기강성과 최대강도를 나타내어 휨강도에 충분히 기여하고 있음을 보였으며, 이후에도 콘크리트와 강판데크는 합성거동를 통해 충분한 연성거동을 하면서 휨 파괴 모드를 나타내었다. 추후 SY Beam의 제작/시공/경제성 확보를 위한 적정 강판두께 및 강판 인장력 기여도 산정방법 도출을 위해 1.05, 1.1, 1.15mm에 대한 추가 해석 및 실험연구가 필요한 것으로 판단된다.

• 조명전기설비학회논문지
• /
• 제21권9호
• /
• pp.87-94
• /
• 2007

This paper presents new criteria for DGA(Dissolved Gases Analysis) using CDF(Cumulative Distribution Function) obtained from the data from the diagnosis of transformers operated in KEPCO over a period of 16 years. Because of differences in operating environments, construction type, oil volume, and other factors, the interpretative criteria of DGA at KEPCO differs from other standards such as IEC-60599, or Rogers and Doernenburg. To suggest the most appropriate criteria, the DGA data from transformers under normal conditions as well as from developing fault transformers were collected. Using these data, this study suggests the limitative gas level of transformers under normal operating conditions and verifies the suitability of the criteria. Because the application of this new criterion to transformers at KEPCO increases the detectable ratio of incipient faults and reduces unnecessary follow-up sampling and analysis, the new criteria yields a more reliable prediction of transformer condition.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년 추계학술발표대회 논문집
• /
• pp.475-478
• /
• 2008

In Korea, there has been a tendency that multi-family housings are constructed by providers such as constructors or real estate agents for the economical benefits and selling efficiency, using standardized plans, load-bearing wall system, water-based construction method, and uniformized formworks. Especially, the traditional installation works which service equipments are buried into structures cause serious problems such as shortening building life span, increasing times of remodeling during specific period (100 years) and wasting resources. Also the unilateral way of massive distribution by providers for multi-family housings is not appropriate to meet the various social needs of residents. To solve these problems, it is necessary to build long-life housing which can be easily separated installations, interior and exterior finishings from structural parts. Therefore, this paper will examine the present administrative law and the civil law in order to find negative factors that can be obstructions for providing long-life housings and set the direction to revise the regulations.

• 산업기술연구
• /
• 제5권
• /
• pp.59-64
• /
• 1985

The remarkable economic growth achived during 1960-1980 in Korea inevitablely demanded the expansion and maintenance of the harbors and their auxiliary seashore facilities. One of the most important elements in the basic besign for the expasion of a harbor and its auxiliary facilities is, of course, the proper determination of the design wave which reflects the major characteristics of the seashore under consideration. In this study, the parameters of significant waves for the industrial harbors on East Coast, Muck-Ho and Po-Hang, are first computed by means of computer programming using S.M.B and P.N.J methods, respectively. Then the design waves with the return periods of 5-200 years were estimated by frequency analysis of the significant waves. A comparison of the design waves with the observed wave data during the past 10 years made it possible to determine the optimum value of design wave at the two harbors. The important results of this study can be summarized as follows; 1) It seems appropriate to take the design wave hieghts with the return period of 50 years at Muck-Ho and Po-Hang as 6.9 and 5.8 meters respectively. 2) It was found that for the determination of design waves on East Coast of Korean Peninsula P.N.J method works better than S.M.B method in predicting the significant wave, and the Log-Normal distribution fits best to the wave data which were put to frequency analysis.

• 상하수도학회지
• /
• 제34권4호
• /
• pp.289-301
• /
• 2020

Since sewer rehabilitation program requires long construction period and enormous capital investment, determination of rehabilitation priorities is important with systematic planning considering appropriate evaluation parameters. In this research, we applied PROMETHEE(Preference Ranking Organization METHod for Evaluations) known as very objective and scientific multi-criteria decision-making analysis, using the weights determined by AHP(Analytic Hierarchy Process) for the selected sewer evaluation items to calculate the rehabilitation priorities for each sewer sub-catchment in basin Gusan 1 of Seoul. Preference functions and preference thresholds were estimated for each criterion of ratio of lack of hydraulic capacity of sewers, defect ratio, ratio of sewers with velocity less than its minimum criteria, and density of sewers in the sub-catchment. As a result, it was found that region d had the first priority among four sub-catchments. For each and every sewer located in region d, we could also rank sewers to be rehabilitated urgently.

• 임상간호연구
• /
• 제14권1호
• /
• pp.139-150
• /
• 2008

Purpose: The aim of this study was to develop instrument measuring the relocation stress syndrome for patients transferred from intensive care unit to general ward in Korea. Method: For item construction, components were drawn from an extensive review of the literature, existing instruments and the result of qualitative approach. A total 48 items were selected for the first draft. Ten experts evaluated this instrument for content validity and the number of items was reduced to 29. To refine and test reliability and validity of the instrument, data were collected from the 594 patients following transfer from intensive care unit. Results: Preliminarily twenty-nine items were generated through content validity and a pilot study. Using corrected items to total correlation coefficient, this instrument was further shortened to a 25 item scale. Factor analysis extracted a total of 23 items with a 5-point Likert-type scale. Relocation Stress Syndrome (RSS) included three subscales; physical factors (12 items), Patient's recognition to health care providers (8 items), and emotional factors (3 items). The RSS established content validity, construct validity, and reliability. Conclusion: This instrument demonstrates good reliability and validity, and therefore it is an appropriate measurement of assessing relocation stress syndrome in ICU to ward transition period.

• Corrosion Science and Technology
• /
• 제16권2호
• /
• pp.76-84
• /
• 2017

In the construction of subsea oil and gas developments, it is increasingly common that subsea oil and gas equipment will be installed in subsea well before final hookup and production. Installation of wellheads, subsea hardware, pipelines, and surface facilities (platforms, FPSO, FLNG, connected terminals, or gas plants) are increasingly driven by independent cost and vessel availability schedules; this gives rise to requirements that the subsea facilities must be stored in the seabed for a specific time. In addition, schedule delays, particularly in the installation or startup of the connected platform, FPSO, FLNG, or onshore plant may cause unexpected extensions of the intended storage period. Currently, there are two methods commonly used for storage subsea facilities in the seabed: dry parking and wet parking. Each method has its own risks, challenges, and implications for the facility life and its integrity. The corrosion management and preservation method selection is a crucial factor to be considered in choosing the appropriate storage method and achieving a successful seabed storage. An overview of those factors is presented, along with a discussion on the internal corrosion threats and assessments.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1864-1873
• /
• 2018

Energy shifting is an innovative method used to obtain the highest profit from the operation of energy storage systems (ESS) by controlling the charge and discharge schedules according to the electricity prices in a given period. Therefore, in this study, we propose an optimal charge and discharge scheduling method that performs energy shift operations derived from an ESS efficiency model. The efficiency model reflects the construction of power conversion systems (PCSs) and lithium battery systems (LBSs) according to the rated discharge time of a MWh-scale ESS. The PCS model was based on measurement data from a real system, whereas for the LBS, we used a circuit model that is appropriate for the MWh scale. In addition, this paper presents the application of a genetic algorithm to obtain the optimal charge and discharge schedules. This development represents a novel evolutionary computation method and aims to find an optimal solution that does not modify the total energy volume for the scheduling process. This optimal charge and discharge scheduling method was verified by various case studies, while the model was used to realize a higher profit than that realized using other scheduling methods.

• 한국강구조학회 논문집
• /
• 제22권6호
• /
• pp.589-597
• /
• 2010

강구조물의 점검시 피로균열이 발견되는 경우에는 보수 보강 시행의 결정과 구조물의 점검주기 결정을 위한 균열의 현재 상태평가와 앞으로의 균열진행 정도에 대한 정량적인 예측이 요구된다. 피로균열에 대한 손상도 평가는 파괴역학 파라미터를 이용한 균열진전속도와 취성파단의 여부 결정이 대표적인 방법으로 파괴역학에 관한 전문적인 지식과 함께 수치해석 프로그램의 활용능력이 필요하다. 이에, 본 연구에서는 피로손상도 평가 방법에 관한 다양성을 확보하고, 파괴역학에 대한 전문적인 지식이 없는 기술자가 피로균열에 의한 강구조물의 손상도를 간편하게 평가 할 수 있는 방법을 개발하기 위한 첫 단계로, 관통균열 시험편을 이용한 균열진전시험을 실시하였다. 그리고 피로균열 표면으로부터 측정된 COD(Crack Opening Displacement)의 크기와 측정위치를 이용하여, 균열진전속도를 추정하기 위한 파라미터를 도출하고, 그 타당성을 분석하였다. 그리고 관통균열이 있는 시험편의 형상, 응력범위, 그리고 응력비에 상관없이 COD를 이용하여 피로균열진전속도를 추정할 수 있는 방법을 제시하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.227-233
• /
• 2008

Porous concrete has large continuous voids of 20-30 % by volume, and this concrete is attractive as environmental material in Japan i.e. permeable road pavement, river bank protection with vegetation and green roof system which influence thermal environment. It is necessary to confirm the frost resistance when constructing porous concrete structure in cold region. However applicable test method and evaluation criterion of porous concrete has not defined yet. Therefore, the object of this study is to investigate the frost resistance of porous concrete and this investigation attempts to address this concern by comparing 4 kinds of specified freezing and thawing tests methods (JIS A1148 procedure A/B and RILEM CIF/CDF test) in consideration of actual environment. RILEM freeze-thaw tests are different from JIS A1148 freeze-thaw tests, which are widely adopted for evaluating the frost resistance of conventional concrete in Japan, in water absorption, cooling rate, length of freezing and thawing period, and number of freezing and thawing cycles. RILEM CIF test measures internal damage and is primarily applicable for pure frost attack. CDF test is appropriate for freeze-thaw and de-icing salt attack. JIS A1148 procedure A/B showed extremely low frost resistance of porous concrete if the large continuous voids were filled with water and the ice expansion in the large continuous voids set in during cooling. Frost resistance of porous concrete was improved by mixing coarse aggregate (G7) which particle size is smaller and fine aggregate in JIS freezing and thawing tests. RILEM CIF/CDF test showed that freeze-thaw and de-icing resistance of porous concrete was seems to be superior in that of conventional concrete.