• Restorative Dentistry and Endodontics
• /
• v.37 no.3
• /
• pp.165-169
• /
• 2012

Closure of interdental spaces using proximal build-ups with resin composite is considered to be practical and conservative. However, a comprehensive approach combining two or more treatment modalities may be needed to improve esthetics. This case report describes the management of a patient with multiple diastemas, a peg-shaped lateral incisor and midline deviation in the maxillary anterior area. Direct resin bonding along with orthodontic movement of teeth allows space closure and midline correction, consequently, creating a better esthetic result.

• Journal of Information Processing Systems
• /
• v.13 no.3
• /
• pp.590-598
• /
• 2017

Recently, there has been an increase in the number of hazardous events, such as fire accidents. Monitoring systems that rely on human resources depend on people; hence, the performance of the system can be degraded when human operators are fatigued or tensed. It is easy to use fire alarm boxes; however, these are frequently activated by external factors such as temperature and humidity. We propose an approach to fire detection using an image processing technique. In this paper, we propose a fire detection method using multichannel information and gray level co-occurrence matrix (GLCM) image features. Multi-channels consist of RGB, YCbCr, and HSV color spaces. The flame color and smoke texture information are used to detect the flames and smoke, respectively. The experimental results show that the proposed method performs better than the previous method in terms of accuracy of fire detection.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.4
• /
• pp.270-275
• /
• 2016

We present an approach for acceleration actor-critic algorithm for reinforcement learning with continuous action space. Actor-critic algorithm has already proved its robustness to the infinitely large action spaces in various high dimensional environments. Despite that success, the main problem of the actor-critic algorithm remains the same-speed of convergence to the optimal policy. In high dimensional state and action space, a searching for the correct action in each state takes enormously long time. Therefore, in this paper we suggest a search accelerating function that allows to leverage speed of algorithm convergence and reach optimal policy faster. In our method, we assume that actions may have their own distribution of preference, that independent on the state. Since in the beginning of learning agent act randomly in the environment, it would be more efficient if actions were taken according to the some heuristic function. We demonstrate that heuristically-accelerated actor-critic algorithm learns optimal policy faster, using Educational Process Mining dataset with records of students' course learning process and their grades.

• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.199-206
• /
• 2020

I suggested the design learning environment based on affordance concept approach for supporting and improving learners' behavior and outcome for convergent design education in this study. The design learning space should be applied teaching and learning activity, especially learners' behavior, physical space condition to support the design thinking process. The design learning space needs openness, individuality and connectivity to support the learners' behavioral to immerse, participate, cooperate, understand, think and fulfill the design thinking process. The composition principles of the learning environment for convergent design education supports communication and collaboration among members for independence and interaction. The spaces for design research and teaching needs high privacy while facilitating visual communications through special materials and wall structure design. Also, for connectivity to improve the learners' physical and visual contact, the environment of the classrooms requires flexibility and mobility by providing an open space integrating unit cells for realizing learning purpose. These are provided by formed of an open structure for inducing visual communication and physical contact to involve the design activities and the mutual interchange.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.2
• /
• pp.127-134
• /
• 2009

T-splines are recently proposed geometric modeling tools. A T-spline surface is a NURBS surface with T-junctions and is defined by a control grid called T-mesh. Local refinement can be performed very easily for T-splines while it is limited for B-splines or NURBS. Using T-splines, patches with unmatched boundaries can be combined easily without special technique. In this study, the analysis methodology using T-splines is proposed. In this methodology, T-splines are used both for description of geometries and for approximation of solution spaces. Two-dimensional linear elastic and dynamic problems will be solved by employing the proposed T-spline finite element method, and the effectiveness of the current analysis methodology will be verified.

• Industrial Engineering and Management Systems
• /
• v.3 no.2
• /
• pp.123-128
• /
• 2004

A tree structure model has been proposed for representing the unequal-area facility layout. Each facility has a different rectangular shape specified by its area and aspect ratio. In this layout problem, based on the assumption that the shop floor has enough space for laying out the facilities, no constraint is considered for a shop floor. Objectives are minimizing total part movement between facilities and total rectangular layout area where all facilities and dead spaces are enclosed. Using the genetic code corresponding to two kinds of information, facility sequence and branching positions in the tree structure model, a genetic algorithm has been applied for finding non-dominated solutions in the two-objective layout problem. We use three kinds of crossover (PMX, OX, CX) for the former part of the chromosome and one-point crossover for the latter part. Two kinds of layout problems have been tested by the proposed method. The results demonstrate that the presented algorithm is able to find good solutions in enough short time.

• Structural Engineering and Mechanics
• /
• v.46 no.3
• /
• pp.371-385
• /
• 2013

Vibration isolators and anti-vibration mounts are ideal, for example, in creating floating floors for gymnasiums, or performance spaces. However, it is well-known that there are great difficulties on isolating vibration transmission in structural steel components, especially steel floors. Besides, the selection of inertia blocks, which are usually used by engineers as an effective vibration control measure, is usually based on crude methods or the experience of the engineers. Thus, no simple method or indices have been available for assessing the effect of inertia blocks on vibration isolation or stability of vibratory systems. Thus, the aims of this research are to provide further background description using a FE model and present and implement a modal approach, that was validated experimentally, the latter assisting in providing improved understanding of the vibration transmission phenomenon in steel buildings excited by a velocity-source type of excitation. A better visualization of the mean-square velocity distribution in the frequency domain is presented using the concept of modal expansion. Finally, the variation of the mean-square velocity with frequency, whilst varying mass and/or stiffness of the coupled system, is presented.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.887-902
• /
• 1994

Within the framework of anisotropic thermoelasticity, the problem of an interlaminar crack in a laminated fiber-reinforced composite subjected to a uniform heat flow is investigated. Under a state of generalized plane deformation, dissimilar anisotropic half-spaces with different fiber orientations are considered to be bound together by a matrix interlayer containing the crack. The interlayer models the matrix-rich interlaminar region of the fibrous composite laminate. Based on the flexibility/stiffness matrix approach, formulation of the current crack problem results in having to solve two sets of singular integral equations for temperature and thermal stress analyses. Numerical results are obtained, illustrating the parametric effects of laminate stacking sequence, relative crack size, crack location, crack surface partial insulation, and fiber volume fraction on the values of mixed mode thermal stress intensity factors.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.1
• /
• pp.101-111
• /
• 2001

Recursive formulas have been effective in solving the equations of motion for large scale constratined mechanical sys-tems. However, derivation of the formulas has been limited to individual terms in the equations of motion, such as veloci-ty, acceleration. and generalized forces. The recursive formulas are generalized in this paper. The velocity transformation method is employed to transform the equations of motion from Cartesian to the joint spaces. Computational structure of the equations of motion in the joint space is carefully examined to classify all necessary computational operations into sev-eral categories. The generalized recursive formula for each category is then developed and applied whenever such a cate-gory of computation is encountered. Since the velocity transformation method yields the equations of motion in a compact form and computational efficiency is achieved by generalized recursive formulas, the proposed method is not only easy to implement but is also efficient. A library of generalized recursive formulas is developed to implement a dynamic analysis algorithm using backward difference.

• Computers and Concrete
• /
• v.2 no.2
• /
• pp.111-123
• /
• 2005

The ductility of reinforced concrete bearing walls subjected to high axial loading and moment can be enhanced by improving the deformability of the compression zone or by reducing the neutral axis depth. The current state-of-the-art procedure evaluating the confinement effect prompts a consideration of the spaces between the transverse and longitudinal reinforcing bars, and a provision of tie bars. At the same time, consideration must also be given to the thickness of the walls. However, such considerations indicate that the confinement effect cannot be expected with the current practice of detailing wall ends in Korea. As an alternative, a comprehensive method for dimensioning boundary elements is proposed so that the entire section of a boundary element can stay within the compression zone when the full flexural strength of the wall is developed. In this comprehensive method, the once predominant code approach for determining the compression zone has been advanced by considering the rectangular stress block parameters varying with the extreme compression fiber strain. Moreover, the size of boundary elements can also be determined in relation to the architectural requirement.