• 한국건축시공학회지
• /
• 제4권1호
• /
• pp.111-118
• /
• 2004

The need for this study must be considerable. as being activate of green roofs research that the organization and construction obtain access to more development technologies. Nevertheless, the green roofs system has begun to apply since 1980's, the green roofs technology was restricted to develop without verification of technologies such as a load or water leakage. There is a limit as urethane waterproofing to almost domestic waterproofing materials and methods of construction for general green roofs. The introduction of materials and methods of construction which are appropriated to property of green roofs could be a decisive factor in a long-range durability and economical maintenance cost, moreover, it support to variety construction system and organization. This present paper describes a necessity of waterproofing and root barrier system is one of the sub-organization based on green roofs construction. which have enormously large impact on the durability.

• 대한공간정보학회지
• /
• 제10권1호
• /
• pp.67-76
• /
• 2002

최근에는 도로의 교통수요 증가와 자동차 문화의 확산으로 도로의 안전성과 편리성, 신속성이 요구되고 있다. 본 논문에서는 RTK GPS를 이용하여 기시공된 도로의 중심선 관측값을 획득한 후 최소제곱법으로 도로 선형의 설계제원인 IP IA R을 산출해 내었다. 이런 설계 제원을 이용해 도로선형의 위험요소를 ${\ukcirner}$도로 구조 시설 기준에 관한 규칙${\lrcorner}$ 에 준해서 분석하였다. RTK GPS를 이용함으로써 도로 선형 위험요소를 신속히 분석할 수 있었다. 기존도에서 선형개량의 필요여부를 판단할때나, 교통사고율이 높은 구간에서 선형에 관련된 사고원인을 분석하고자 할 때, 유용하게 적용될 수 있을 것으로 판단된다.

• 한국정밀공학회지
• /
• 제22권5호
• /
• pp.113-120
• /
• 2005

Because of the turbulent markets and the increasing demand on product quality, the application of new technology to practice is increasingly important. In case of automotive industries, they take interest in laser welding to solve these problems because laser welding has many advantages such as good accessibility, welding quality, fast welding speed and so on. To apply this technology to welding of car body, the data of laser welding are collected through lots of the experiment according to the material, geometry and layer number of welding points. Based on the experiment results and the information of product, i.e. the car side panel, the clustering of stitches for laser welding was carried out and the optimal equipments are selected through the comparison between the requirements of welding and the potential of equipments. Using these results, laser welding cell for the car side panel are configured with the concept of the digital manufacturing, which ensures maximum planning security with visualization and simulation. Finally, the optimal laser welding cell is chosen by the evaluation of alternative cells with assessment criteria.

• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.61-68
• /
• 2018

As construction projects become larger, higher and more complex, efficient use of information is increasingly more important. As a result, there is a growing demand to apply BIM data obtained in the design stage to the construction stage. In this study, we propose a BIM-based construction schedule management system in order to promote introduction and application of BIM in the construction stage. Specifically, we provided how to build BIM database to be used for construction schedule management, and proposed how to obtain progress information and enter information based on analysis of progress schedule. We also provided a system of classifying construction works for more systematic use of BIM database, a process of using BIM database in construction projects, and a step-by-step guideline on how to establish the system. The proposed construction schedule management system provides information on particular construction schedule, as well as information and progress chart on delayed parts of the work so that a change in schedule can be managed. Additionally, by linking system database with the BIM model, construction progress can be checked in 3D simulation and a delay in construction schedule can be managed. As a result, using BIM at construction sites contributes to improving project productivity.

• 대한안전경영과학회지
• /
• 제22권4호
• /
• pp.35-43
• /
• 2020

The National Competency Standards(NCS) has been developed a good curriculum to reflect the demand in the industry. NCS is defined as systemizing the knowledge, skill, and attitude required to perform a task in the industry. It is an effort to reduce the gap between educational requirements and occupational requirements. However, when NCS is applied, the task level is changed to the title of qualification according to the policy outcomes for the government project. And, the NCS has been emphasizing the purpose of license acquisition, rather than using the standard for tasks in the industry. It means that the misuse of NSC hinders utilizing it as the original purpose of standardizing a task. It requires the customer to study the required competency unit with a no-choice option. Moreover, it makes it hard for companies or industry autonomically run the NCS. Therefore, we define the operational range in terms of the education field, the qualification field, and the career field to diffuse and apply NCS, and suggest the effective utilization method.

• 한국정보시스템학회지:정보시스템연구
• /
• 제31권4호
• /
• pp.47-73
• /
• 2022

Purpose The purpose of this study is to select the electronic architecture concept of the powertrain domain of the electronic platform to be applied to electric vehicles after 2025. Previously, the automotive electrical and electronic architecture was determined only by trend analysis, but the purpose was to determine the scenario based on the data and select it with clear evaluation indicators. Design/methodology/approach This study identified the function to be applied to the powertrain domain of next-generation electric vehicle, estimated the controller, defined the function feature list, organized the scenario candidates with the controller list and function feature list, and selected the final architecture scenario. Findings According to the research results, the powertrain domain of electric vehicles was selected as the architectural concept to apply the DCU (Domain Control Unit) and VCU (Vehicle Control Unit) integrated architecture to next-generation electric vehicles. Although it is disadvantageous or equivalent in terms of cost, it was found to be excellent in most indicators such as stability, security, and hardware demand.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.115-115
• /
• 2020

Water network partitioning (WNP) is an initiative technique to divide the original water distribution network (WDN) into several sub-networks with only sparse connections between them called, District Metered Areas (DMAs). Operating and managing (O&M) WDN through DMAs is bringing many advantages, such as quantification and detection of water leakage, uniform pressure management, isolation from chemical contamination. The research of WNP recently has been highlighted by applying different methods for dividing a network into a specified number of DMAs. However, it is an open question on how to determine the optimal number of DMAs for a given network. In this study, we present a method to divide an original WDN into DMAs (called Clustering) based on community structure algorithm for auto-creation of suitable DMAs. To that aim, many hydraulic properties are taken into consideration to form the appropriate DMAs, in which each DMA is controlled as uniform as possible in terms of pressure, elevation, and water demand. In a second phase, called Sectorization, the flow meters and control valves are optimally placed to divide the DMAs, while minimizing the pressure reduction. To comprehensively evaluate the WNP performance and determine optimal number of DMAs for given WDN, we apply the framework of multiple-criteria decision analysis. The proposed method is demonstrated using a real-life benchmark network and obtained permissible results. The approach is a decision-support scheme for water utilities to make optimal decisions when designing the DMAs of their WDNs.

• 한국직업건강간호학회지
• /
• 제22권3호
• /
• pp.257-265
• /
• 2013

Purpose: This study aimed to investigate the job stress level of call center workers and figure out its relation with cognitive emotion regulation strategies as a cognitive coping strategy. Methods: Data collection was conducted on 985 call center workers, working for K companies in Korea. ANOVA, t-test, Scheffe's test and multiple regression have been conducted for the data analysis using SAS 9.0 software. Results: The total job stress score of subjects ranges $Q_{25{\sim}49}$ (the lower 50%) whereas the score of job demand and job control ranges $Q_{50{\sim}74}$ (the upper 50%), and its sectional job stress level is high. Since job stress is the major factor affecting cognitive emotion regulation strategies, it is shown that when the job stress score gets higher, the score of positive cognitive emotion regulation strategies gets decreased but the score of negative cognitive emotion regulation strategies, increased. Conclusion: Based on the results of this study, it is necessary to develop and apply an effective stress easing method for call center workers which reduces negative cognitive emotion regulation strategies and increases positive ones.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.103-109
• /
• 2002

This research is aiming to specify the requirement of the investment such as initial cost, running cost earning rate to make effective investment considering the purpose of remodeling and economical value of store building enough to meet the initial purpose of remodeling. The review of earning rate for economical evaluation was performed by the on-site auditing on the structure and function of the building and applying the assessment simulation program, which is to find the possible business model to identify the requirement of building owner through case study. After the research, the following results are obtained. First, it is important that many aspects should be carefully analysis and the best method should be selected as characteristics of remodeling can be defer each other in their implementations. Second, though the remodeling of exist buildings to promote the functions has been applied. no suitable assessment tool has bee developed for deciding the level of remodeling in the view of economical efficiency so far. Third, the economical benefit was evaluated by analysing annual earning rate which is applied by investment items and recovery period for the investment. More specific data bate should be established to apply the suggested economic accession in business enough to forecast the future circumstances. More researches should be promoted on this area continuously as well as the integrated economic evaluation of remodeling on existing building.

• 지식경영연구
• /
• 제12권2호
• /
• pp.35-55
• /
• 2011

By providing a number of unprecedented knowledge sources, virtual communities have stimulated interests in knowledge sourcing Specifically, virtual communities have triggered fundamental changes in the ways that people interact with one another. Thus, there is a critical need to examine how people try to behave for sourcing knowledge in virtual communities, particularly in terms of the demand-side perspective of knowledge. To address the knowledge gap regarding knowledge sourcing behavior from the knowledge recipients' side, this study draws upon GPA(goal-plan-action) theory with both the social cognitive theory and the goal-setting theory as overarching theories. Furthermore, we apply past experience in virtual communities and trust in knowledge providers as moderating variables to deeply understand the knowledge recipients' behavior. We expect to present theoretical and practical implications through our findings, which are relevant to cognitive goal-setting and knowledge sourcing behavior. In the theoretical perspective, this study illustrates how knowledge recipients determine knowledge sourcing behavior. Based on our findings, this study has practical implications for virtual communities to effectively balance knowledge repositories and knowledge management systems with knowledge providers and recipients.