• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.149-150
• /
• 2022

External forces acting on the mooring facilities include wave, wind, current, and ship's kinetic energy. In particular, the ship's kinetic energy is changing as the ship become larger, and larger carrying capacity. It was intended to analyze the berthing velocity measurement data at on tanker terminals equipped with a DAS (Docking Aid System) through statistical means and algorithms and use it as basic data for safer and more efficient pier design and pilotage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.1
• /
• pp.26-33
• /
• 2003

The SSB(Single Side Band) communication in the 27MHz band has mainly been using between fishiery station and small fishing ship less than 101ons, but the most of small fishing ship are depend on cellular system. When accident for small ship at sea happens, It's very important to communicate continuously for preventing the collision and taking action. At present it is hard to control small fishing ship and provide information properly by using 27MHz SSB channel. Therefore in this paper We present TRS communication system applied for small fishing ship to protect the safety and life at sea and to prepare for emmergency, and also validate it's application.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.196-201
• /
• 2002

The SSB(Single Side Band) communication in the 27MHz band has mainly been using between fishiery station and small fishing ship less than 10tons, but the most of small fishing ship are depend on cellular system. When accident for small ship at sea happens, It's very important to communicate continuously for preventing the collision and taking action. At present it is hard to control small fishing ship and provide information properly by using 27MHz SSB channel. Therefore in this paper We present TRS communication system applied for small fishing ship to protect the safy and life at sea and to prepare for emmergency, and also validate it's application.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.657-665
• /
• 2007

The object of this paper is to describe the ubiquitous computing technologies for ship, which is produced and assembled by many steel blocks. It includes the testing of a 2.4GHz wireless communications platforms and radio-frequency identification technology with the blocks disturbing the wireless communication. The power line communication that is established in a ship already is also experimented for some data transfer. Also, possible application areas of the ubiquitous computing technology to ships are discussed. At last, the test bed copied from an actual vessel was installed and data acquisition tests were established using wire and wireless communication. In this paper, we implemented some ubiquitous computing technologies in the test bed simulating a ship environment and investigated the basic characteristics of ubiquitous computing technologies.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04a
• /
• pp.559-564
• /
• 1995

Feature based design approach is widely studied for the application of mechanical part design and process planning. Mechanical parts are associated with volumetric form features in nature. Therfore, one of the important characteristics that reside in the form feature research until now is that features have been studied in connection with CAPP for material removal. We studied the application of feature based design for ship structure design. Ship structure has interesting nature that tis distinct from mechanical parts. Among these are multiple cell structure, non-volumetric part and production by welding or assembling. An idea of applying feature based design paradigm for design, process planning, cost analysis and engineering calculation was shown. Non-manifold geometric modeler ACIS was adopted to fully benefit from the non-manifold nature of ship structure.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.3
• /
• pp.339-349
• /
• 2017

This paper is related to structural design evaluation of 19,000 TEU ultra large container ship, dealing with hydroelastic response, i.e. springing and whipping. It illustrates application of direct calculation tools and methodologies to both fatigue and ultimate strength assessment, simultaneously taking into account ship motions and her elastic deformations. Methodology for springing and whipping assessment within so called WhiSp notation is elaborated in details, and in order to evaluate innovative container ship design with increased loading capacity, a series of independent hydroelastic computations for container ship with mobile deckhouse and conventional one are performed with the same calculation setup. Fully coupled 3D FEM - 3D BEM model is applied, while the ultimate bending capacity of hull girder is determined by means of MARS software. Beside comparative analysis of representative quantities for considered ships, relative influence of hydroelasticity on ship response is addressed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.3
• /
• pp.480-488
• /
• 2019

In this paper, we propose an obstacle avoidance system for an unmanned ship to navigate safely in dynamic environments. Also, in this paper, one-dimensional low-cost lidar sensor is used, and a servo motor is used to implement the lidar sensor in a two-dimensional space. The distance and direction of an obstacle are measured through the two-dimensional lidar sensor. The unmanned ship is controlled by the application at a Tablet PC. The user inputs the coordinates of the destination in Google maps. Then the position of the unmanned ship is compared with the position of the destination through GPS and a geomagnetic sensor. If the unmanned ship finds obstacles while moving to its destination, it avoids obstacles through a fuzzy control-based algorithm. The paper shows that the experimental results can effectively construct an obstacle avoidance system for an unmanned ship with a low-cost LiDAR sensor using fuzzy control.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1086-1091
• /
• 2022

The International Maritime Organization is establishing international agreements on maritime safety and security to prepare for the introduction of autonomous ships. In Korea, the industry is focusing on autonomous navigation system technology development, and to reduce accidents involving coastal ships, research on autonomous ship technology application plans for coastal ships is in progress. Interest in autonomously operated ships is increasing worldwide, and maritime demonstrations for verification of developed technologies are being pursued. In this study, a basic investigation was conducted on the design of a demonstration ship and an onshore platform (remote support center) using digital twin technology for application to coastal ships. To apply digital twin technology, an 8-m small battery-powered electric propulsion ship was selected as the target. The basic design of the twin-integrated platform was developed. The ship navigation and operation data were stored on a server system, and remote-control commands of the electric propulsion ship was achieved through communication between the ship and the onshore platform. Ship performance management, operation and operation optimization, and predictive control are possible using this digital twin technology. This safe and economical digital twin technology is applicable to ships responding to crisis scenarios.

• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.142-143
• /
• 2006

The use of hull structural steel with heavy thickness has been enlarging due to the increase of ship volume. High heat input welding methods like EGW, FGB and SAW tandem are applied in field of ship-building. However the application of high heat input methods is clearly limited because welding method to be most widely used is semi-automatic FCAW but heat input for FCAW is limited in order to obtain impact property at low temperature. This paper will introduce the application of 30mm bead width of FCW with Ni free & low Ni content.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.459-470
• /
• 2014

During ship design, welding-induced distortions are roughly estimated as a function of the size of the component as well as the welding process and residual stresses are assumed to be locally in the range of the yield stress. Existing welding simulation methods are very complex and time-consuming and therefore not applicable to large structures like ships. Simplified methods for the estimation of welding effects were and still are subject of several research projects, but mostly concerning smaller structures. The main goal of this paper is the application of a multi-layer welding simulation to the block joint of a ship structure. When welding block joints, high constraints occur due to the ship structure which are assumed to result in accordingly high residual stresses. Constraints measured during construction were realized in a test plant for small-scale welding specimens in order to investigate their and other effects on the residual stresses. Associated welding simulations were successfully performed with fine-mesh finite element models. Further analyses showed that a courser mesh was also able to reproduce the welding-induced reaction forces and hence the residual stresses after some calibration. Based on the coarse modeling it was possible to perform the welding simulation at a block joint in order to investigate the influence of the resulting residual stresses on the behavior of the real structure, showing quite interesting stress distributions. Finally it is discussed whether smaller and idealized models of definite areas of the block joint can be used to achieve the same results offering possibilities to consider residual stresses in the design process.