• 한국분무공학회지
• /
• 제11권3호
• /
• pp.140-146
• /
• 2006

The objective of this work is to analyze the atomization and evaporation characteristics of dimethyl ether(DME) fuel for the application of HCCI diesel engine. In order to investigate the spray behavior of DME fuel, the macroscopic and microscopic characteristics were investigated in terms of spray development, spray tip penetration, impingement time, SMD, and axial mean velocity under the various injection timing and ambient conditions. For the illumination of spray, the spray visualization system was composed of a Nd:YAG laser and an ICCD camera and laser-sheet method was used. The atomization characteristics of DME fuel are analyzed by using phase Doppler particle analyzer (PDPA) system It was reveal that the spray development of DME is slower and rapidly disappeared as elapsed time after start of injection at the same injection duration. The impingement timing of diesel fuel was fester than that of DME fuel. The comparison of spray atomization characteristics in both fuels shows that diesel fuel has a large SMD value that DME.

• 대한음성학회지:말소리
• /
• 제58호
• /
• pp.101-117
• /
• 2006

The development of efficient multimodal interfaces and fusion algorithms requires knowledge of usage patterns that show how people use multiple modalities. We analyzed multimodal usage patterns for TV-guide application scenarios (or tasks). In order to collect usage patterns, we implemented a multimodal usage pattern collection system having two input modalities: speech and touch-gesture. Fifty-four subjects participated in our study. Analysis of the collected usage patterns shows a positive correlation between the task type and multimodal usage patterns. In addition, we analyzed the timing between speech-utterances and their corresponding touch-gestures that shows the touch-gesture occurring time interval relative to the duration of speech utterance. We believe that, for developing efficient multimodal fusion algorithms on an application, the multimodal usage pattern analysis for the given application, similar to our work for TV guide application, have to be done in advance.

• 원예과학기술지
• /
• 제30권6호
• /
• pp.635-641
• /
• 2012

In Korea, slurry composted and biofiltered (SCB) liquid fertilizer is produced through the composting and biofiltering of animal waste. An appropriate guidelines involving proper treatment of SCB liquid fertilizer on turfgrass should be considered. An experiment was conducted to determine the optimum application amount, timing, and frequency of SCB liquid fertilizer for Zoysia japonica 'Millock'. The SCB liquid fertilizer was applied in low, medium, and high amount (N at 15, 25, and 40 $g{\cdot}m^{-2}$ per year in 2010, and 10, 20, and 40 $g{\cdot}m^{-2}$ per year in 2011, respectively) and treated during the growing season or dormancy period. During the growing season, SCB liquid fertilizer was applied twice or four times. The greatest improvement in turf quality for both years was in SCB plots applied four times with N at 40 $g{\cdot}m^{-2}$ per year during the growing season (SH4). This treatment exhibited turf color retention in the fall, and enhanced clipping yield during the growing and fall seasons. SCB plots with four times during the growing season (SL4, SM4, and SH4) exhibited higher shoot density relative to the same amount of other SCB treatments. Plots treated during the dormancy period also showed a high turf color index during the next growing season in 2011. The results indicate that SCB with high amount up to N at 40 $g{\cdot}m^{-2}$ per year applied four times during the growing season and dormant application produced high turf quality and growth, and could be recommended as an optimum application guide.

• Journal of Positioning, Navigation, and Timing
• /
• 제2권1호
• /
• pp.67-74
• /
• 2013

In this study, a remote controller was designed using localization technique. The designed remote controller system consists of infrared transmit/receive module for time synchronization, ultrasonic transmit/receive module for measuring the TOA value, and micro-controller for processing the measured data value. For the position estimation method of remote controller, the Savarese method was used which does not have a problem of diverging solution depending on initial value. The noise included in the measured value was removed by separating the signal and noise with the use of EMD method which is the non-stationary signal analysis technique. The designed system was tested by constructing a simulation environment, and the improvement of accuracy and precision for the application of EMD method was examined.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권4호
• /
• pp.173-180
• /
• 2016

This paper presents a method to suppress multipath induced by pulses using supervised learning. In modern electronics, pulses have been used for various purposes such as communication or distance measurements. Like other signals, pulses also suffer from multipath. When a pulse and a multipath are overlapped, the original pulse shape is distorted. The distorted pulse could result in communication failures or distance measurement errors. However, a large number of samples available from a pulse can be used to effectively reject multipath by using a supervised learning method. This paper introduces how a supervised learning method can be applied to Distance Measuring Equipment. Simulation results show that multipath induced distance measuring error can be suppressed by 10 ~ 45 percent depending on the allowed pulse shape variation allowed in a standard.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권4호
• /
• pp.213-219
• /
• 2016

Most existing studies on the wide-area differential global positioning system (WADGPS) employed a grid ionosphere model for error correction in the ionospheric delay. The present study discusses the application of satellite-based ionospheric delay model that provides an error model as a plane function with regard to individual satellites in order to improve accuracy in the WADGPS. The satellite-based ionospheric delay model was developed by Stanford University in the USA. In the present study, the algorithm in the model is applied to the WADGPS system and experimental results using measurements in the Korean Peninsula are presented. Around 1 m horizontal accuracy was exhibited in the existing planar fit grid model but when the satellite-based model was applied, correction performance within 1 m was verified.

• 한국경영과학회지
• /
• 제20권1호
• /
• pp.159-177
• /
• 1995

The objective of this paper is to propose a knowledge-based fuzzy post adjustment so that unstructured problems can be solved more realistically by expert systems. Major part of this mechanism forcuses on fuzzily assessing the influence of various external factors and accordingly improving the solutions of unstructured problem being concerned. For this purpose, three kinds of knowledge are used : user knowledge, expert knowledge, and machine knowledge. User knowledge is required for evaluating the external factors as well as operating the expert systems. Machine knowledge is automatically derived from historical instances of a target problem domain by using machine learning techniques, and used as a major knowledge source for inference. Expert knowledge is incorporate dinto fuzzy membership functions for external factors which seem to significantly affect the target problems. We applied this mechanism to a prototyoe expert system whose major objective is to provide expert guidance for stock market timing such as sell, buty, or wait. Experiments showed that our proposed mechanism can improve the solution quality of expert systems operating in turbulent decision-making environments.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.114-120
• /
• 2002

In a distributed real-time control system, it is essential to confirm the timing behavior of all tasks because these tasks of each real-time controller have to finish their processes within the specified time intervals called a deadline. In order to satisfy this objective, the timing analysis of a distributed real-time system such as shcedulability test must be performed during the system design phase. In this study, a simple application of CAN fur a vehicle body network system is formulated to apply to a holistic scheduling analysis, and the worst-case execution time (WCET) and the worst-case end-to-end response time (WCRT) are evaluated in the point of holistic system view.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권2호
• /
• pp.59-66
• /
• 2016

The International GNSS Service (IGS) provides the IGS-Real Time Service (IGS-RTS) corrections that can be used in stand-alone positioning in real time. In this study, the positioning accuracy before and after the application of the corrections to broadcast ephemeris by applying the IGS-RTS corrections at code pseudo-range based stand-alone positioning was compared with positioning result using precise ephemeris. The analysis result on IGS-RTS corrections showed that orbit error and clock error were 0.05 m and 0.5 ns compared to precise ephemeris and accuracy improved by about 8.5% compared to the broadcast ephemeris-applied result when the IGS-RTS was applied to positioning. Furthermore, regionally dispersed five observatories were selected to analyze the effect of external environments on positioning accuracy and positioning errors according to location and time were compared as well as the number of visible satellites and position dilution of precision by observatory were analyzed to verify a correlation with positioning error.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권3호
• /
• pp.139-146
• /
• 2018

In recent years, a satellite navigation signal authentication technique has been introduced to determine the spoofing of commercial C/A code using the cross-correlation mode of GPS P(Y) code received at two receivers. This paper discusses the technical considerations in the implementation and application of authentication system simulator hardware to achieve the above technique. The configuration of the simulator consists of authentication system and user receiver. The synchronization of GPS signals received at two devices, data transmission and reception, and codeless correlation of P(Y) code were implemented. The simulation test result verified that spoofing detection using P(Y) codeless correlation could be achieved.