• Journal of the Optical Society of Korea
• /
• v.20 no.5
• /
• pp.541-546
• /
• 2016

In this paper, by using the Rayleigh-Sommer field theory and the cross-spectral density function, the analytical expression for the intensity distribution of a double half-Gaussian hollow beam in a turbulent atmosphere is obtained. The influence of the initial spot size of this beam on its propagation properties in a turbulent atmosphere is simulated, and the intensity distributions for such beams with different spot sizes are obtained. The results show that the initial spot size has an important influence on the propagation properties in the near field, while this influence in the far field is very weak.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.448-452
• /
• 2018

A three-wavelength $Pr^{3+}:YLF$ laser at 604 nm, 607 nm and 640 nm simultaneously output by Fabry-Perot (F-P) etalon has been obtained. A 444 nm blue laser diode is used for pumping the $Pr^{3+}:YLF$ crystal, and a 0.1 mm F-P etalon is inserted in the resonator to select wavelength. The theoretical model of three-wavelength $Pr^{3+}:YLF$ laser is established, by adjusting the tilt angle of the etalon, the transmittances of the different wavelengths can be controlled, and the threshold values can be made to equalize by controlling the loss among different wavelengths. In the experiment, when the tilt angle of etalon is $9^{\circ}$ and the optimized length of resonator is 48 mm, the total output power of 25 mW at the three-wavelength is achieved at incident pump power of 7.5 W.

• Current Optics and Photonics
• /
• v.7 no.6
• /
• pp.714-720
• /
• 2023

Laser cleaning has the advantages of environmental protection, precision, and high efficiency, and has good prospects for application in removing oxide films on the surface of aluminum alloy. This paper discusses the cleaning threshold and cleaning mechanism of aluminum alloy surface oxide film. A nanosecond pulsed laser was used to remove a 5-㎛-thick oxide film from the surface of 7A04 aluminum alloy, and the target surface temperature and cleaning depth were simulated. The effects of different laser energy densities on the surface morphology of the aluminum alloy were analyzed, and the plasma motion process was recorded using a high-speed camera. The temperature measurement results of the experiment are close to the simulation results. The results show that the laser cleaning of aluminum alloy oxide film is mainly based on the vaporization mechanism and the shock wave generated by the explosion.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.193-194
• /
• 2015

In this paper, the solid state pulsed power modulator developed in KERI, which is based on IGBT technologies are overviewed. During last ten years, several kinds of solid state modulators were developed in KERI such as IGBT stacks with step up transformer, full IGBT stack based marx generator, modified IGBT marx generator and high repetitive solid state modulator. Basic principle of the design is described and each pros and cons are compared. KERI's solid state pulsed power modulators has lot of advantages for industrial pulsed power application focused on everlasting life cycle and high repetitive, and shows superior arching protection ability.

• Current Optics and Photonics
• /
• v.4 no.4
• /
• pp.273-276
• /
• 2020

We report on the relationship between output current for quadrant photodetector (QPD) and bias voltage in silicon-based p-i-n (positive-intrinsic-negative) QPD examined using millisecond pulse laser (ms pulse laser) irradiation. The mechanism governing the relationship was further studied experimentally. The output current curves were obtained by carrying out QPD under different bias voltages (0-40 V) irradiated by ms pulse laser. Compared to other photodetectors, the relaxation was created in the output current for QPD which is never present in other photodetectors, such as PIN and avalanche photodetector (APD), and the maximum value of relaxation was from 6.8 to 38.0 ㎂, the amplitude of relaxation increases with bias value. The mechanism behind this relaxation phenomenon can be ascribed to the bias voltage induced Joule heating effect. With bias voltage increasing, the temperature in a QPD device will increase accordingly, which makes carriers in a QPD move more dramatically, and thus leads to the formation of such relaxation.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.367-372
• /
• 2004

Nitrite, a curing agent of meat products, is precursors of carcinogenic N-nitrosamines during processing of meat products or under human stomach conditions as well as having its own toxicity. Some researches have been conducted to evaluate the effects of ionizing radiation on the reduction of residual nitrite and N-nitrosamines in an aqueous model system and cured meat products with different packaging methods during storage. These results showed that the gamma irradiation was effective in reducing the residual nitrite and N-nitrosamines in an aqueous model system as well as meat products. Especially, irradiation combined with vacuum or modified atmosphere packaging was more effective in nitrite and N-nitrosamines reduction than aerobic packaging during storage. The objective of this review is to introduce the irradiation technology for the application of reducing the residual nitrite and N-nitrosamine contents in meat products.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1559-1561
• /
• 2003

In northeast Asia, there will be several important HVDC transmission lines to be established in Korea and China for perspective electric network market. 5500V 4-inches High voltage thyristor can be used in the DC transmission and distribution of electric power system. In this application, many thyristors are connected in series for each thyristor valves. Therefore, the required low reverse-recovery charge QRR and low on-state voltage drop $V_{TM}$ for such thyristor is necessary to this application. In our work, the on-state and off-state voltage performance was simulated by commercial simulation software.

• The Journal of Information Systems
• /
• v.29 no.1
• /
• pp.181-199
• /
• 2020

Purpose The purpose of this study is to analyze the current state of grounded theory methodology in Korea information systems studies and to suggest its application strategies. Design/methodology/approach After reviewing previous studies, this study reviewed 16 papers which adopted grounded theory methodology and analyzed these papers by two ways, research contents and methods adopted from grounded theory methodology: Main characteristics in grounded theory methodology are selected as main criteria in analysis such as data collection method, constant comparison, software use, coding ways, suggested model, proposition suggestion etc., while subject, theory/practice orientation, and role of prior knowledge are included in research contents. Findings Based on the review and analysis, this paper suggested four guidelines for adopting grounded theory methodology to information systems research in Korea: First, division of research methodology into stages. Second, explicit documentation of research process. Third, pursuit of diversity in research topics. Fourth, strengthening scale up and theoretical integration.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.319.2-319
• /
• 2002

Synchrotron-based X-ray absorption spectroscopy has been applied to determine the changes in bulk oxidation state of uranium oxides in molten salt. From an analysis of XANES data, one can determine the cahnges in bulk oxidation-state of U compounds in salts(LiCl/KCl). XAFS spectroscpy is a powerful tool for probing the changes in valence state and structure of uranium compounds in colten salt as well as in noncrystalline form and doped in other matrices.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10c
• /
• pp.117-120
• /
• 1998

The objective of this study is to investigate the possibility for application of E.P-dust as both admixture and fillers for aggregates under various mixproportion, replacing method and the ratios of replacement. According to the experimental results, improvement of viscosity and reducing of segregation at fresh state and gain in strength at hardened state can be achieved by applying E.P-dust. It can be considered from the results that application of E.P-dust will be more efficient as fillers for aggregates than as binder