• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.2
• /
• pp.223-231
• /
• 1997

A variety of approaches have been investigated for the application of spark-ignition engine knock control. The control method implemented, here as "Fuzzy Control", has the advantage of not requiring the knowledge of a mathematical model of the controlled object and is more robust and flexible than conventional approaches. Knock control in this study is performed using vibration signal which is measured with accelerometer attached to the cylinder block of a 1498cc four-cylinder spark-ignition engine. The experimental results obtained with this method are compared with those obtained with a knock interval controller and with those of a conventional controller. Those results illustrate better performance in torque than knock interval controller and conventional controller.ontroller.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.6
• /
• pp.1109-1115
• /
• 2010

In this paper, exact confidence interval of hyper-geometric parameter, that is the probability of success p in the population is discussed. Usually, binomial distribution is a well known discrete distribution with abundant usage. Hypergeometric distribution frequently replaces a binomial distribution when it is desirable to make allowance for the finiteness of the population size. For example, an application of the hypergeometric distribution arises in describing a probability model for the number of children attacked by an infectious disease, when a fixed number of them are exposed to it. Exact confidence interval estimation of hypergeometric parameter is reviewed. We consider the performance of exact confidence interval estimates of hypergeometric parameter in terms of actual coverage probability by small sample Monte Carlo simulation.

• Journal of ILASS-Korea
• /
• v.28 no.2
• /
• pp.62-67
• /
• 2023

Recently, the global automobile industry is aiming for a transition from internal combustion locomotives to zero-emission vehicles. Electric vehicles powered by battery energy can operate at peak performance and improve fuel economy by applying multiple motors or multi-speed transmissions. In order to design a two-speed transmission, it is necessary to evaluate and analyze the application system and performance of electric vehicles. In this study, control performance optimization of a twostage battery electric vehicle equipped with an AMT-based automatic transmission was performed and performance according to control pattern changes was analyzed. In order to improve the operating efficiency of the motor, the shift control that sets the optimal operating point according to the vehicle speed and required torque was derived from the motor efficiency map. The performance of battery energy consumption and transmission loss energy according to the hysteresis interval was analyzed and optimized. The hysteresis interval applied to the optimal shift map acted as a factor in reducing the frequency and loss of shifts. It has been shown that keeping the hysteresis interval at about 4 km/h can reduce energy consumption while reducing the number of shifts.

• Journal of Animal Reproduction and Biotechnology
• /
• v.34 no.3
• /
• pp.166-172
• /
• 2019

Heart rate is a relatively simple and non-invasive method that is used as an important physiological indicator in many studies and has a close relationship with heart structure and function, cardiovascular disease and sudden cardiac death. In general, appropriately low heart rate during resting means effective heart function and cardiovascular fitness; heart rate at recovery is an important indicator of health and disease condition. We found a beagle dog (Dog_1) with a high heart rate in the previous preliminary experiment. Therefore, purpose of this study was to compare the heart rate response of the Dog_1 with the control group during 12 weeks of interval exercise, to evaluate the structural and functional abnormalities of the heart and to verify the applicability of exercise program. Heart rate was checked during 12 weeks of interval exercise, and after the exercise was over, imaging examination and hematological and serum biochemistry were performed. As a result, Dog_1 (165.6 ± 1.5) showed significantly higher heart rate in low intensity session of interval exercise than control group (133.3 ± 0.5, p < 0.01). In addition, Dog_1 (181.2 ± 1.4) showed significantly higher heart rate than control group (155.1 ± 0.9) in high intensity session (p < 0.01). The heart rate (30 sec, 60 sec) during recovery state was higher in Dog_1 (30 sec: 156.8 ± 4.0, 60 sec: 166.8 ± 5.8) than in the control group (30 sec: 111.2 ± 2.5, 60 sec: 104.0 ± 5.1, p < 0.01). The results of the imaging examination of Dog_1 with high heart rate confirmed that the heart had no functional and structural abnormalities. All beagles with the interval exercise program did not show maladjustment, and in the hematological and serum biochemistry results, all the parameter were within the reference range. If the interval exercise program of this study is used in the future, it is expected to be used as an important basic data to achieve the purpose of health, welfare, and physical fitness improvement of dogs.

• Journal of Korean Society on Water Environment
• /
• v.28 no.4
• /
• pp.595-600
• /
• 2012

This study is to assess the application of SWAT-CUP(Soil and Water Assessment Tool-Calibration Uncertainty Programs) and to extend daily flow data from 8-day interval flow data which has been measured by Korean Ministry of Environment(MOE). Model sensitivity analysis and calibration were performed with sequential uncertainty fitting(SUIF-2), which is one of the programs interfaced with SWAT, in the package SWAT-CUP. The most sensitive parameters were SOL_K.sol, CH_N2.rte, CN2.mgt, SOL_BD.sol, ALPHA_BF.gw, ALPHA_BNK.rte, SOL_AWC.sol, CH_K2.rte, SFTMP.bsn, GW_DELAY.gw. Following the sensitivity analysis, SWAT-CUP calibration was carried out using 8-day interval flow data from January 2008 to December 2010. The results were then assessed based on the visual agreement and simulated flow plots and the performance statistics generated $R^2$ and NSE which are 0.71 and 0.61 respectively. Results of these statistics indicated that there was a good agreement between the observed and simulated flow. To extend daily flow data from 8-day interval flow data, parameters, which were estimated by SWAT-CUP, re-entered for SWAT model. As a result, the observed flow data were found to reflect the trend of simulated flow data. From these results, it is thought that this method could be used to provide daily flow data using 8-day interval flow data.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.235-243
• /
• 2007

Sensor network is used to obtain sensing data in various area. The interval to sense the events depends on the type of target application and the amounts of data generated by sensor nodes are not constant. Many applications exploit long sensing interval to enhance the life time of network but there are specific applications that requires very short interval to obtain fine-grained, high-precision sensing data. If the number of nodes in the network is increased and the interval to sense data is shortened, the amounts of generated data are greatly increased and this leads to increased amount of packets to transfer to the network. To transfer large amount of packets fast, it is necessary that the delay between successive packet transmissions should be minimized as possible. In Sensor network, since the Operating Systems are worked on the event driven, the Timer Event is used to transfer packets successively. However, since the transferring time of packet completely is varies very much, it is very hard to set appropriate interval. The longer the interval, the higher the delay and the shorter the delay, the larger the fail of transfer request. In this paper, we propose ESTEO which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed.In ESTEO, the delay between successive packet transmissions is shortened very much since the transmission of next packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission timee. Therefore ESTEO could provide high packet transmission rate given large amount of packets.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.551-556
• /
• 2021

In this paper, we deal with the stability condition of linear interval discrete systems with time-varying delays and unstructured uncertainty. For the interval discrete system which has interval matrix as its system matrices, time-varying delay time within some interval value and unstructured uncertainty which can include non-linearity and be expressed by only its magnitude, the stability condition is proposed. Compared with the previous result derived by using a upper bound solution of the Lyapunov equation, the new results are derived by the form of simple inequality based on Lyapunov stability condition and have the advantage of being more effective in stability application. Furthermore, the proposed stable conditions are very comprehensive and powerful, including the previously published stable conditions of various linear discrete systems. The superiority of the new condition is proven in the derivation process, and the utility and superiority of the proposed condition are examined through numerical example.

• Korean Journal of Weed Science
• /
• v.32 no.3
• /
• pp.230-239
• /
• 2012

Coconut (Cocos nucifera L) is one of the predominant plantation crops in Sri Lankan economy which is known to have existed for over thousands of years. During the past decades coconut production had been reduced by a significant quantity. The usage of poor quality planting materials is a major reason for the low coconut production. Thus much attention needs to be paid in coconut nurseries. Weed management is a critical management practice in the nursery. Though glyphosate application is becoming popular in nurseries it can affect weeds as well as coconut seedlings growth. Therefore the effects of glyphosate were evaluated by determining the growth of shoot and root of coconut seedlings. Poly bag nursery was prepared and three treatments were used. Treatments were no glyphosate and manual weeding ($T_1$), application of glyphosate 1.08 ai kg $ha^{-1}$ at 2 monthly interval ($T_2$) and application of glyphosate 1.44 ai kg $ha^{-1}$ at 2 monthly interval ($T_3$). Application of glyphosate at early stage of seedling growth had a no significant effect on growth parameters tested. However, the concentrations of glyphosate negatively affected numbers, volumes and dry weights of secondary, tertiary and quaternary roots at the latter stage of seedling growth. The leaf area and the height of seedling were significantly reduced by the highest concentration of glyphosate. Among the growth parameters tested, seedling girth and shoot dry weight were not affected by the application of glyphosate. These results revealed that the usage of glyphosate at both concentrations negatively affected root growth of coconut seedlings. Based on these results, the both concentration levels of glyphosate should be applied to coconut nurseries before sprouting the seed nuts.

• MALSORI
• /
• no.58
• /
• pp.101-117
• /
• 2006

The development of efficient multimodal interfaces and fusion algorithms requires knowledge of usage patterns that show how people use multiple modalities. We analyzed multimodal usage patterns for TV-guide application scenarios (or tasks). In order to collect usage patterns, we implemented a multimodal usage pattern collection system having two input modalities: speech and touch-gesture. Fifty-four subjects participated in our study. Analysis of the collected usage patterns shows a positive correlation between the task type and multimodal usage patterns. In addition, we analyzed the timing between speech-utterances and their corresponding touch-gestures that shows the touch-gesture occurring time interval relative to the duration of speech utterance. We believe that, for developing efficient multimodal fusion algorithms on an application, the multimodal usage pattern analysis for the given application, similar to our work for TV guide application, have to be done in advance.

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.247-254
• /
• 2012

Soil and Water Assessment Tool (SWAT) model has been widely used in estimation of flow and water quality at various watersheds worldwide, and it has an auto-calibration tool that could calibrate the flow and water quality data automatically from thousands of simulations. However, only continuous measured day flow/water quality data could be used in the current SWAT auto-calibration tool. Therefore, 8-day interval flow and water quality data measured nationwide by Korean Ministry of Environment (MOE) could not be used in SWAT auto-calibration even though long-term flow and water quality data in the Korean Total Maximum Daily Load (TMDL) watersheds available. In this study, current SWAT auto-calibration was modified to calibrate flow and water quality using 8-day interval flow and water quality data. As a result of this study, the Nash and Sutcliffe Efficiency (NSE) values for flow estimation using auto-calibration are 0.77 (calibration period) and 0.68 (validation period), and NSE value for water quality (T-P load) estimation (using the 8-day interval water quality data) is 0.80. The enhanced SWAT auto-calibration could be used in the estimation of continuous flow and water quality data at the outlet of TMDL watersheds and ungaged point of watersheds. In the next study, the enhanced SWAT auto-calibration will be integrated with Web based Load Duration Curve (LDC) system, and it could be suggested as methods of appraisal of TMDL in South Korea.