• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.3
• /
• pp.147-152
• /
• 2001

This study was carried out to investigate the effect of application time and amount of liquid pig manure on growth and yield of rice plant and infiltration water quality. Liquid manure treatment with higher application rate and closer application time to transplanting time showed higher plant height and number of tiller at panicle formation stage, but it caused the plant disease and pest and lodging. In liquid manure treatment with higher application rate, number of panicles per hill and number of spikelets per panicle were higher but yield of rice was less than chemical fertilizer treatment due to low rate of ripeness and 1,000 grain weight. $NO_3-N$ concentration in infiltration water sample was increased with increasing application amount of liquid manure and closer application time to transplanting of rice plant. With consideration yield of rice and environment such as groundwater quality, the proper application amount were 150% and 100% of recommending N fertilizer level (11kg) at before winter and April or May treatment, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.235-239
• /
• 1993

To determine the optimal application level of fertilizers, nitrogen, phosphate, potassium and lime in ramie(Beohmeria nivia Hooker et Arnot), the experiments were conducted for four years from seedling stage propagated by suckers to fully-grown stage under various comibinations of $N, P_2O_5, O$ and lime. Increasing in application rate of N and $K_2$O enhanced stem growth of ramie greatly, and it appeared that lime application also had large effect on increase of stem growth. Yield increased greatly by increasing of application rate with two or three times in N and two times in $K_2$O as much as the standard application rate of fertilizers N-$P_2O_5$-$K_2$O =9-3-9kg/l0a. Especially, treatment with 18kg N, 3kg $P_2O_5, $, 18kg $K_2$O and 200kg lime per l0a showed higher percentage of productive culm and increased yield of crude fiber about 33%. The variation among treatments was relatively small in stem length but larger in fresh weight of shoot and stem. The variation was large at early stage of experiment, that is, from one to two years after planting, but decreased progressively from three years after planting. There was no large difference in number of stems among application rates of fertilizers from three years after planting which was fully-grown stage. However, increasing in application rate of Nand $K_2$O twice as much as the standard rate had large effect on increasing the percentage of productive culm, and hence increased yield greatly.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.209-209
• /
• 2017

The application of liquid swine manure to soil has been commonly reported to increase crop productivity by improving plant nutrient availability. This study was conducted to investigate the effect of liquid swine manure (LSM) application on yield of green manure crops in paddy. Three different application rates of LSM equivalent to 25%, 50%, and 75% of standard fertilization rate of P were applied to the paddy field after rice harvest, and two cover crops, hairy vetch (Vicia villosa Roth) and barley (Hordeum vulgare L.), were subsequently mix-seeded and cultivated. Plant height of barley was 7% higher in LSM P25% and LSM P50% compared to control treatment (no LSM application), while no significant difference was observed between LSM P75% and control. However, there were no significant differences in plant height of hairy vetch among treatments. Dry matter (DM) yield of green manure increased with LSM application rate, reaching a maximum at LSM P50% (38 and 17% yield increase over control for hairy vetch and barley, respectively), but it decreased at LSM P75% rate. Nitrogen production by green manure crops was the highest in LSM P50% treatment, where the amount of produced N was 57% higher than the optimum N fertilization level for rice ($90kg\;N\;ha^{-1}$). Excess green manure biomass above an optimum level can be removed and utilized either for incorporation into nearby cropland or for sale as fresh forage. Therefore, it is concluded that the application rate of LSM P50% is recommendable for the maximum biomass and nitrogen production from green manure crops in paddy.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.3
• /
• pp.167-176
• /
• 2022

BACKGROUND: Nitrogen (N) is an important element for turfgrass (Zoysia matrella) growth; however, standard N application rate for turfgrass is not established yet. This study was conducted to evaluate the effect of N application rates on the growth and quality of turfgrass for establishment of standard N application rate. METHODS AND RESULTS: Treatments were as follows; control (0 N g/m²/month), 1N (1 N g/m²/month), 2N(2 N g/m²/month), 3N (3 N g/m²/month), 4N (4 N g/m²/month), and 5N (5 N g/m²/month). N application improved visual turfgrass quality. Compared with the control, clipping yield of all N treatments increased by 90~194%. The grass shoot weight of 3N, 4N, and 5N treatments increased by 52%, 43%, and 111%, respectively, and the stolon weight of 4N and 5N treatments increased by 412% and 201%, respectively, compared to the control. The N uptake amount and N recovery rate were estimated to be 4.10~6.28 g/m² and 14~58%, respectively. CONCLUSION(S): These results indicate that considering visual quality, clipping yield, N uptake amount, and N recovery, the application rate of 2~3 N g/m²/month was suggested to be suitable for Z. matrella production.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.818-824
• /
• 2019

In this study, the direct water quenching technique is applied to validate the applicability of direct water quenching as a cooling method in the hot stamping process of 3.2 mm thick boron steel sheet. Cooling performance of conventional die quenching and direct water quenching is compared. Higher cooling rate is obtained by hot stamping with direct water quenching compared to die quenching. As the flow rate of cooling water increases, the cooling rate increases, and a high cooling rate of 71 ℃/s is achieved under flow rate conditions of 0.8 L/min. Through direct water quenching, the cooling time required for sufficient cooling of the sheet is reduced. Full martensitic microstructure is obtained under flow rate condition of 0.8 L/min. Hardness increases with increasing flow rate. From these results, it is verified that the direct water quenching is applicable to the hot stamping of thick boron steel sheet.

• Journal of the Korean Society of Tobacco Science
• /
• v.9 no.2
• /
• pp.25-35
• /
• 1987

Effects of application time And rate of chlorine on the chlorine absorption and distribution at different stalk positions of the plants were Investigated in burley tobacco grown under the pot condition. Treatment consisted of 6 application times (from 2 weeks before transplanting to 8 weeks after transplanting with 2 weeks' interval) and 2 application rates (2g and 4g-KCl/pot) by 6X2 factorial experimental design. The tobacco plants took up the chlorine rapidly just after chlorine application, and the chlorine content of leaf was increased proportionally to the rate of chlorine application. The chlorine was accumulated when much in lower leaves when chlorine was applied early, while the chlorine accumulated much in upper leaves when chlorine was applied late. The chlorine content of leaf was negatively correlated to the degree of brightness, red color and yellow color of cured leaf. Significant Increases In cured leaf ratio, leaf thickness, leaf weight and weight Per unit leaf area of harvested leaf were obtained with increased chlorine application. When the chlorine was applied early, the leaf weight showed Increasing tendency.

• Laser Solutions
• /
• v.16 no.2
• /
• pp.1-6
• /
• 2013

Picosecond lasers are a very effective tool for micromachining metals, especially when high accuracy, high surface roughness and no heat affected zone are required. However, low productivity has been a limit to broadening the spectrum of their industrial applications. Recently it was reported that in the micromachining of copper with a 1064nm picosecond laser, there exist the optimal pulse energy and repetition rate to achieve the maximum volume ablation rate. In this paper, we used a 515nm picosecond laser, which is more efficient for micromachining copper in terms of laser energy absorption, to obtain its optimal pulse energy and repetition rate. Theoretical analysis based on the experimental data on copper ablation showed that using a 515nm picosecond laser instead of a 1064nm picosecond laser is more favorable in that the calculated threshold fluence is 75% lower and optical penetration depth is 50% deeper.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.76-88
• /
• 1997

Constant .DELTA.K fatigue crack growth rate experiments were performed by applying an intermediate single and multiple overload for structural steel, SM45C. The purpose of the present study is to investigate the influence of multiple overloads at various stress intensity factor ranges and the effect of statistical variability of crack retardation behavior. The normalized delayed load cycle, delayed crack length and the minimum crack growth rate are increased with increasing baseline stress intensity factor range when the overload ratio and the number of overload application were constant. The crack retardation under low baseline stress intensity factor range increases by increasing the number of overload application, but the minimum crack growth rate decreases by increasing the number of overload application. A strong linear correlation exists between the minimum crack growth rate and the number of overload applications. And, it was observed that the variability in the crack growth retardation behavior are presented, the probability distribution functions of delayed load cycle, delayed crack length and crack growth life are 2-parameter Weibull. The coefficient of variation of delayed load cycle and delayed crack length for the number of 10 overload applications data are 14.8 and 9.2%, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.31-36
• /
• 2008

This study was carried out to clarify the effect of silicate application on rice grain quality and storage characteristics in Ilpumbyeo cultivar. In yield and yield components, panicles and spikelet numbers were increased and ripened grain rate was also increased by 2%. Head rice yield was increased by $7.7{\sim}9.5%$ in silicate application. Protein content of milled rice was reduced by $0.2{\sim}0.3%$ and head rice rate was increased by $2.9{\sim}6.7%$ in silicate application due to decrease of chalky and damaged rice rate. In milling characteristics, color separation rate was improved by $4.2{\sim}7.2%$ and colored rice rate was decreased by $5.5{\sim}16.6%$ in silicate application. Acid value of stored brown rice were increased slowly in low temperature and silicate application, but that in room temperature and no silicate application was increased remarkably. The best degree rate of stored brown rice (over than 7.5 of pH) measured by the pH of grain was increased by the silicate application in both low and room temperature. Therefore, it was suggested that the storage characteristics of rice grain was improved by the silicate application.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.2
• /
• pp.113-118
• /
• 1974

A study was carried out to investigate the effect of application time of fertilizer nitrogen on its rate of uptake and its distribution in rice plant. The rate of applied fertilizer was 100kg/ha, as a single application at transplanting time and four equal split applications of 25kg/ha was applied at transplanting time, 3 weeks after transplanting, 1 week before the primodial initiation stage of growth and at the flag leaf stage of growth, respectively. The ammonium sulfate was labelled with N-15, as 1% atom excess for single application and 4.4% atom excess for split applications. The results are sumarized as follows: 1. The effect of split application of nitrogen on yield was observed. The yield of brown rice of the single application at transplanting time was 3.1 ton/ha and the split application was 3.4 ton/ha. However, without nitrogen the yield was reduced to 1.9 ton/ha. 2. The number of grains per panicle and 1000 grains weight were increased as split application of nitrogen, but for the number of panicles per hill and maturing rate, the single application of nitrogen revealed favorable results. 3. The rate of uptake of applied fertilizer nitrogen showed a tendency that the efficiency of fertilizer nitrogen increased by top dressing. The rate of uptake of applied nitrogen as basal application, first top dressing, second top dressing and third top dressing was 28%, 33% 51% and 63%, respectively. 4. After shooting stage of the growth, nitrogen in straws transfered to grains. The nitrogen applied at flag leaf stage was absorbed by root and easily accumulated in grains rather than straw.