• 한국식품위생안전성학회지
• /
• 제7권2호
• /
• pp.133-145
• /
• 1992

The sanitation inspection is the most frequently used procedure to protect foods prepared in foodservice establishments. In order to enhance foodservice inspections and to improve post-inspection remedial measures, more practical evaluation methods for sanitation are required. The HACCP approach is based upon factors which contribute to foodborne disease rather than of factors which relate to aesthetics. Contributing factors for foodborne diseases from food service establishments reported in USA, Candada, and England were analyzed to identify potential hazards during practical foodservice operations. Hazards were classified at critical control points by risk ranking, Twenty-two observable practical indicators relating to each contributing factor were selected and adjusted to standardized procedures and hazard determiners at critical control points, The weights for each inspection item were ranked as 1, 2, 3, 4, or 5 according to the risk level of contributing factors. And also application for the inspection item in different 6 types of work procedures were suggested for the use of specialized foodservice establishment and cafeteria, and of manager's self inspection in each establishment.

• 한국식품위생안전성학회:학술대회논문집
• /
• 한국식품위생안전성학회 1992년도 학술강연회
• /
• pp.33-45
• /
• 1992

The sanitation inspection is the most frequently used procedure to protect foods prepared in foodservice establishments. In order to enhance foodservioe inspections and to improve post-inspection remedial measures, more practical evaluation methods for sanitation are required. The HACCP approach is based upon factors which contribute to foodborne disease rather than on factors which relate to aesthetics. Contributing factors for foodborne disease from foodservice establishments reported in USA, Canada, and England were analyzed to identify potential hazards during practical foodservioe operations. Hazards were classified at critical control points by risk ranking. Twenty-two observable practical indicators relating to each contributing factor were selected and adjusted to standardized procedures and hazard determiners at critical contral points. The weights for each inspection item were ranked as 1, 2, 3, 4 or 5 according to the risk level of contributing factors. And also application for the inspection item in different 6 types of work procedures was suggested for the use of specialized foodservice establishment and cafeteria, and of manager's self inspection in each establishment.

• Current Research on Agriculture and Life Sciences
• /
• 제31권2호
• /
• pp.113-123
• /
• 2013

The carbon-offset mechanism based on forest management has been recognized as a meaningful tool to sequestrate carbons already existing in the atmosphere. Thus, with an emphasis on the forest-originated carbon-offset mechanism, the accurate measurement of the carbon stock in forests has become important, as carbon credits should be issued proportionally with forest carbon stocks. Various remote sensing techniques have already been developed for measuring forest carbon stocks. Yet, despite the efficiency of remote sensing techniques, the final accuracy of their carbon stock estimations is disputable. Therefore, minimizing the uncertainty embedded in the application of remote sensing techniques is important to prevent questions over the carbon stock evaluation for issuing carbon credits. Accordingly, this study reviews the overall procedures of carbon stock evaluation-related remote sensing techniques and identifies the problematic technical issues when measuring the carbon stock. The procedures are sub-divided into four stages: the characteristics of the remote sensing sensor, data preparation, data analysis, and evaluation. Depending on the choice of technique, there are many disputable issues in each stage, resulting in quite different results for the final carbon stock evaluation. Thus, the establishment of detailed standards for each stageis urgently needed. From a policy-making perspective, the top priority should be given to establishinga standard sampling technique and enhancing the statistical analysis tools.

• 접착 및 계면
• /
• 제23권4호
• /
• pp.101-107
• /
• 2022

Adhesive joints have many advantages such as weight savings, corrosion and fatigue resistance and now developed even withstand of high impact and dynamic loads. However, an adhesion has cumbersome and complicated surface preparation processes. The surface preparation step is critical in adhesive joint manufacturing in order to obtain the prescribed strength for adhesive joints. In this study, it was attempted to simplify and reduce the number of surface preparation steps, and abrasion and rapid adhesive application (ARAA) process is developed for an alternative solution. The abrasion processes are performed only for creating surface roughness in standard procedures (SP), although the abrasion processes cause surface activation itself. The results showed that there is no need the long procedures in laboratory or chemical agents for adhesion. After the abrasion process, the attracted and highly reactive fresh surface layer obtained, and its effect on bonding success is observed and analyzed in this research, in light of the essential physic and adhesion theories. Al 6061 aluminum adherends and epoxy-based adhesives were chosen for bonding processes, which is mostly used in light vehicle parts. The adherends were cleaned, treated and activated only with abrasion, and after the adhesive application the specimens were tested under quasi-static loading. The satisfied ARAA results were compared with that of the specimens fabricated by the standard procedure (SP) of adhesion processes of high impact loads.

• Mass Spectrometry Letters
• /
• 제6권1호
• /
• pp.21-25
• /
• 2015

In this paper, I describe the importance of matrix spraying conditions in imaging mass spectrometry (IMS) to obtain successful imaging results. My developed matrix application methodology, which is a "two-step matrix application" sequentially combined with matrix sublimation and spraying matrix solution can provide high reproducibility and high ion yield compared with a conventional direct spraying method. However, insufficient IMS results were obtained occasionally despite the two-step method. Therefore, I wanted to characterize the methodology to continuously provide high quality data. According to my results, the sublimation time was not a strict parameter, and the most important step was the first spraying condition. This means that the extraction conditions from the tissue section and co-crystallization of the matrix were the most important factors.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권2호
• /
• pp.126-131
• /
• 2010

Objectives: This study is aimed to determine any differences in the postoperative stability between absorbable and titanium plate systems for fixation in orthognathic surgery with simultaneous maxillomandibular procedures especially including maxillary posterior impaction and advancement. Study Design: Forty patients with dentofacial deformities were randomly assigned into titanium (4 males and 6 females) and absorbable (17 males and 13 females) fixation group. All patients had undergone surgical alterations of maxilla with posterior impaction and advancement. A comparison study of the change in the maxillary position after the simultaneous surgery was performed with 1-day, 6-months postoperative lateral cephalograms compared to preoperative lateral cephalogram by tracing. Wilcoxon rank sum test was used for statistical analysis. Result: The position of the maxilla was stable after surgery and was not changed significantly from 1 day to 6 month after the simultaneous maxillomandibular surgery both in the experimental (absorbable plates) and control (titanium plates). Conclusion: This study suggests that application of absorable plating system in the fixation of maxillary segment in the simultaneous maxillomandibular procedures, leads to a predictable short-term postoperative skeletal stability comparable to the titanium plating system. Long term follow-up and further studies will be needed.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.296-299
• /
• 2002

건설사업관리가 공사 발주방식으로 이용될 수 있는 제도적 근거가 마련된 이후, 건설사업관리자 사업수행능력 세부 평가기준이 마련하여 건설사업관리 제도의 활성화 방안을 추진 중에 있다. 다양한 시설에 건설사업관리가 발주되고 있는 현 시점에서 건설사업관리자의 선정시 고려되어야 할 사항들, 여러 가지 절차와 영향 요소들, 그리고 평가 및 선정 기준 등의 문제점을 사례 조사를 통하여 분석하고, 이를 바탕으로 개선방안을 제시한다. 명확한 건설사업관리자의 선정 기준 및 절차의 성립을 통해 프로젝트에 필요로 하는 적절한 사업자를 선정하여 프로젝트를 성공적으로 수행 완료하는 것이 CM의 활성화 방안이 될 것이다.

• Archives of Plastic Surgery
• /
• 제47권5호
• /
• pp.435-443
• /
• 2020

Background The innervated radial artery superficial palmar branch (iRASP) flap was designed to provide consistent innervation by the palmar cutaneous branch of the median nerve (PCMN) to a glabrous skin flap. The iRASP flap is used to achieve coverage of diverse volar defects of digits. However, unexpected anatomical variations can affect flap survival and outcomes. Methods Cases in which patients received iRASP flaps since April 1, 2014 were retrospectively investigated by reviewing the operation notes and intraoperative photographs. The injury type, flap dimensions, arterial and neural anatomy, secondary procedures, and complications were evaluated. Results Twenty-eight cases were reviewed, and no flap failures were observed. The observed anatomical variations were the absence of a direct skin perforator, large-diameter radial artery superficial palmar branch (RASP), and the PCMN not being a single branch. Debulking procedures were performed in 16 cases (57.1%) due to flap bulkiness. Conclusions In some cases, an excessively large RASP artery was observed, even when there was no direct skin perforator from the RASP or variation in the PCMN. These findings should facilitate application of the iRASP flap, as well as any surgical procedures that involve potential damage to the PCMN in the inter-thenar crease region. Additional clinical cases will provide further clarification regarding potential anatomical variations.

• 컴퓨터교육학회논문지
• /
• 제9권5호
• /
• pp.41-51
• /
• 2006

본 연구에서는 중학교에서 학습해야 할 알고리즘 분야의 학년별 학습 요소 선정의 타당성을 확보하고, 인접 교과와의 연계성을 분석하여 관련된 증거와 정보를 수집하여 연계 요소를 조정함으로써 알고리즘 분야의 내적 위계를 정립하고, 교과 간에 발생한 수 있는 중복성 문제의 대안을 제시하고자 하였다. 학습 요소 선정의 타당성을 검토하기 위하여 4가지 준거를 구안하였으며, 이를 현재 학교 현장 적합성 검토를 위해 교육인적자원부 웹사이트에 탑재되어 있는 "중학교 컴퓨터 교육과정 개정 시안(초안)에 적용하였다. 또한 인접 교과와의 중복성 검토에서는 중학교 정보 교과의 '문제 해결방법과 절차' 영역과 초등학교 수학과의 '규칙성과 문제 해결' 영역의 내용 중복성이 심각한 것으로 나타났으며, '문제 해결 방법과 절차' 영역의 내용체계는 인접 교과와의 차별화 전략이 필요한 것으로 나타났다.

• 구강회복응용과학지
• /
• 제23권2호
• /
• pp.145-155
• /
• 2007

The advent of osseointegration and advances in biomaterials and techniques have contributed to increased application of dental implants in the restoration of maxillary partial edentulous patients. Often, in these patients, soft and hard tissue defects result from a variety of causes, such as infection, trauma, and tooth loss. These create an anatomically less favorable foundation for ideal implant placement. Reconstruction of the atrophic maxillary alveolar bone through a variety of regenerative surgical procedures has become predictable; it may be necessary prior to implant placement or simultaneously at the time of implant surgery to provide a restoration with a good long-term prognosis. Regenerative procedures are used for horizontal and vertical ridge augmentation. Many different techniques exist for effective bone augmentation. The approach is largely dependent on the extent of the defect and specific procedures to be performed for the implant reconstruction. It is most appropriate to use an evidenced-based approach when a treatment plan is being developed for bone augmentation cases. The cases presented in this article clinically demonstrate the efficacy of using a autogenous block graft, guided bone regeneration, ridge split, immediated implant placement technique on the atrophic maxillary area.