• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.20 no.1
• /
• pp.36-41
• /
• 2009

Background and Objectives: Topical administration of mitomycin-C (MMC) has been reported to reduce or delay scar formation in airway surgery. However, it is not infrequent to experience recurrent stenosis or adhesion of operative wound even after a meticulous MMC application during the laryngeal surgery. Therefore we aimed to evaluate the effectiveness of repeated postoperative MMC applications and the technical feasibility of MMC applications to the laryngeal wound at an outpatient clinic. Methods: We reviewed medical records of 13 consecutive patients who received office-based MMC applications after laryngeal airway surgery at Samsung Medical Center, Seoul, Korea. The patients were grouped into 3 categories according to the site of surgical wound and the purpose of MMC application; group I : supraglottic stenosis (n=5), group II : cordectomy and arytenoidectomy site granulation prevention (n=3), Group III : laryngeal web prevention (n=5). Outcomes in each group and adverse effects of repeated MMC applications were evaluated. Results: Office-based MMC application was successfully performed one to four times with a week interval for each patient. No significant complications were observed except slightly decreased mucosal wave in one female patient who received 4 times of MMC application at the anterior commissure of vocal fold. Repeated MMC applications at the outpatient clinic resulted in wide or acceptable supraglottic airway in group I, clean wound healing without granulation formation in group II, and negligible or no web formation at the anterior commissure in group III. Conclusion : Office-based topical administration of MMC to the larynx was technically feasible. Postoperative repeated MMC applications were effective to reduce recurrent stenosis or adhesion of supraglottic structures, to prevent granuloma formation after laser arytenoidectomy and glottic web formation after anterior commissure resection.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.305-310
• /
• 2020

Lately the increase of unemployment and freeters, the use of mobile applications for part-time jobs has been increasing. This study identifies the problems of mobile job applications and focuses on domestic applications: 'Albamon' and 'Albachunkuk'. By conducting surveys and in-depth interviews based on Peter Morville's Honeycomb model. The usability assessment, the proposed improvement results are as follows: First, unhealthy establishments and overlapping job blocking filters should be further strengthened. Second, a design to tailor to the 20s age group, who are the main user of the application, is needed. Third, a fully customized part-time job listing is needed for users on the application landing page. Fourth, the application requires verification procedures for the document preparation regarding work contracts and reporting of employers. This study hopes to add to the improvement of job-seeking application services in Korea.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.1
• /
• pp.103-121
• /
• 1989

The purpose of this study was to investigate the influence of balancing interference on the activity of masticatory muscles and condylar path. Eight dental students of Won Kwang University without any symptoms of temporomandibular disorder and occlusal interferences, were selected for this study, The balancing interference was provided by construction and cementation of cast metal crowns on the upper and lower first molars. For the measurement of muscle activity, bioelectric processor (EM2, Myotronic Res., Inc., U.S.A.) was used and for the condular path, computerized electronic pantograph (Pantronics, Denar Corp., U.S.A.) was used and the myographic recordings were taken bilaterally from the anterior temporal, masseter and digastric muscles on rest position and on functions. These experimental procedures were done before cementation of experimental crown, three days after cementation of experimental crown, one week after, two weeks after and then one week after removal of experimental crown. The results are as follows: 1. The PRI score was increased at three days after application of balancing interference, and decreased at two weeks after. 2. Three subjects showed mild symptom of temporomandibular disorder at three or four days after application of interference, but the symptom was subsided in one or two weeks after application of interference. 3. One week after application of balancing interference, the activity of ipsilateral anterior temporal muscle in four subjects was decreased on gum chewing at experimental site. 4. Three days after application of balancing interference, the activity of ipsilateral anterior temporal muscle in three subjects was increased on gum chewing at non-experimental site. 5. The influence of balancing interference on the activity of anterior temporal, masseter and gigastric muscle was not prominent.

• Journal of Periodontal and Implant Science
• /
• v.31 no.2
• /
• pp.333-344
• /
• 2001

The present study was performed to evaluate the effect of tetracycline - HCl on the change of implant surface microstructure according to application time. Implants with pure titanium machined surface and titanium plasma-sprayed surface were utilized. Implant surface was rubbed with 50mg/ml tetracycline - HCl solution for 1 min., $1\frac{1}{2}\;min$., 2 min., $2\frac{1}{2}\;min$. and 3min. respectively in the test group and with saline for 1 min. in the control group. Then, the specimens were processed for scanning electron microscopic observation. The following results were obtained. 1. Pure titanium machined surfaces conditioned with saline for 1 min., showed a few shallow grooves and ridges and were less irregular. 2. Pure titanium machined surfaces conditioned with 50mg/ml tetracycline - HCl solution showed more irregular and corrosive surfaces compared to the control group irrespective of the application time of tetracycline - HCl solution. 3. Titanium plasma-sprayed surfaces conditioned with saline for 1 min., were deposited with round amorphous particles and showed round or irregular pores that can be connected to each other. 4. The irregularity of titanium plasma-sprayed surfaces conditioned with 50mg/ml tetracycline - HCl solution was lessened and the flattened areas were wider relative to the application time of tetracycline - HCl solution. 5. Titanium plasma-sprayed surfaces conditioned with tetracycline - HCl solution for 1 min. and $1\frac{1}{2}\;min$. were very similar to that of the control group, but the surfaces conditioned for 2 min., $2\frac{1}{2}\; min$. and 3 min. were changed. In conclusion, pure titanium machined surfaces were changed irrespective of the application time of tetracycline - HCl solution. And titanium plasma-sprayed surfaces conditioned with tetracycline - HCl solution began to be changed from $1\frac{1}{2}\;min$. This results will be applicable to the regenerative procedures for peri-implantitis treatment.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.511-516
• /
• 2024

The recently enacted detailed guidelines on the performance evaluation of track facilities presented the necessary requirements regarding the evaluation procedures and implementation methods of track performance evaluation. However, the grade of rail surface damage is determined by external inspection (visual inspection), and there is no choice but to rely only on qualitative evaluation based on the subjective judgment of the inspector. Therefore, in this study, we attempted to develop a diagnostic application that can diagnose rail internal defects using rail surface damage. In the field investigation, rail surface damage was investigated and patterns were analyzed. Additionally, in the indoor test, SEM testing was used to construct image data of rail internal damage, and crack length, depth, and angle were quantified. In this study, a deep learning model (Fast R-CNN) using image data constructed from field surveys and indoor tests was applied to the application. A rail surface damage diagnosis application (App) using a deep learning model that can be used on smart devices was developed. We developed a smart diagnosis system for rail surface damage that can be used in future track diagnosis and performance evaluation work.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.365-374
• /
• 2021

Purpose: This study aims to study the reinforcement of the connection between the ordering agency and the in-house supplier's disaster reduction activity management system. Method: The requirements for the supplier strategy specified in the enterprise disaster management standard were identified, the application cases of agency A and supplier B were reviewed, and procedures for reinforcing the linkage of the disaster reduction activity management system were derived. Result: In order to clearly define the supplier strategy, which is a requirement of the enterprise disaster management standard, and to reinforce the linkage, it was studied that the procedure applied by the ordering agency and the supplier, and a standardized procedure for sharing the results produced by the procedure were necessary. Conclusion: Among the procedures for establishing a disaster reduction activity management system for in-house suppliers, an improvement plan was proposed to reinforce the linkage of important procedures, and the proposed contents and procedures were suggested to be reflected in the enterprise disaster management standards and related norms.

• Land and Housing Review
• /
• v.7 no.1
• /
• pp.19-29
• /
• 2016

This study proposes the big data policy and case studies in Korea and the application of land and housing of spatial big data to excavate the future business and to propose the spatial big data based application for the government policy in advance. As a result, at first, the policy and cases of big data in Korea were evaluated. Centered on the Government 3.0 Committee, the information from each department of government is being established with the big-data-based system, and the Ministry of Land, Infrastructure, and Transport is establishing the spatial big data system from 2013 to support application of big data through the platform of national spatial information and job creation. Second, based on the information system established and administrated by LH, the status of national territory information and the application of land and housing were evaluated. First of all, the information system is categorized mainly into the support of public ministration, statistical view, real estate information, on-line petition, and national policy support, and as a basic direction of major application, the national territory information (DB), demand of application (scope of work), and profit creation (business model) were regarded. After the settings of such basic direction, as a result of evaluating an approach in terms of work scope and work procedure, the four application fields were extracted: selection of candidate land for regional development business, administration and operation of rental house, settings of priority for land preservation, and settings of priority for urban generation. Third, to implement the application system of spatial big data in the four fields extracted, the required data and application and analytic procedures for each application field were proposed, and to implement the application solution of spatial big data, the improvement and future direction of evaluation required from LH were proposed.

• Journal of Periodontal and Implant Science
• /
• v.27 no.4
• /
• pp.767-783
• /
• 1997

Guided tissue regeneration, bone graft procedures, and application of growth factors have been used to regenerate lost periodontal tissues. Recently, enamel matrix derivative has been introduced into periodontal regeneration procedures in expectation of promoting new bone and cementum formation. The purpose' of this study was to evaluate the effect of enamel matrix derivative in 1-wall intrabony defects in beagle dogs. For this purpose, each dog was anesthesized using intravenous anesthesia and mandibular 1st, 3rd premolars were extracted. 2 months later, the 1-wall intrabony defects(mesio-distal width: 4mm, depth: 4mm) were created on the distal side of 2nd premolars and mesial side of 4th premolars. The control group was treated with debridement alone, and experimental group was treated with debridement and enamel matrix derivative application. The healing processes were histologically and histometrically observed after 8 weeks and the results were as follows : 1. The length of junctional epithelium was $0.94{\pm}0.80mm$ in the control group, $0.57{\pm}0.42mm$ in the experimental group, with no statistically significant difference between groups. 2. The connective tissue attachment was $1.36{\pm}0.98mm$ in the control group. $0.38{\pm}0.43mm$ in the experimental group, with statistically significant difference between groups(P<0.05). 3. The new cementum formation was $2.49{\pm}1.06mm$ in the control group, $3.59{\pm}0.74mm$ in the experimental group. with statistically significant difference between groups(P<0.05). 4. The new bone formation was $1.92{\pm}0.97mm$ in the control group, $2.32{\pm}0.59mm$ in the experimental group. with no statistically significant difference between groups. Within the limitation to this study protocol, enamel matrix derivative application in 1-wall intrabony defect enhanced new cementum formation. Although there was no statistically significant difference, enamel matrix derivative also seems to be effective in inhibition of apical migration of junctional epithelium and new bone formation.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.583-592
• /
• 2006

Software development based on product lines has been proved a promising technology that can drastically reduce cycle time and guarantee quality by strategically reusing quality core assets that belong to an organization. However, how to measure within a product line is different from how to measure within a single software project in that we have to consider the aspects of both core assets and projects that utilize the assets. Moreover, the performance aspects of overall project lines need to be considered within a product line context. Therefore, a systematic approach to measure the performance of product lines is essential to have consistent, repeatable and effective measures within a product line. This paper presents a context-based measurements elicitation approach for product lines that reflects the performance characteristics of product lines and the diversity of their application. The approach includes both detailed procedures and work products resulting from implementation of the procedures, along with their templates. To show the utility of the approach, this paper presents the elicited measurements, especially for technical management practices among product line practices. This paper also illustrated a real application case that adopt this approach. The systematic approach enables management attributes, i.e., measurements to be identified when we construct product lines or develop software product based on the product lines. The measurements will be effective in that they are derived in consideration of the application context and interests of stakeholders.

• Tunnel and Underground Space
• /
• v.33 no.5
• /
• pp.348-372
• /
• 2023

In relation to the high-level radioactive waste disposal project in deep fractured rock aquifer environments, it is essential to evaluate hydrogeological characteristics for evaluating the suitability of the site and operational stability. Such subsurface hydrogeological data is obtained through in-situ tests using boreholes excavated at the target site. The accuracy and reliability of the investigation results are directly related to the selection of appropriate test methods, the performance of the investigation system, standardization of the investigation procedure. In this report, we introduce the detailed procedures for the representative test method, the constant pressure injection test (CPIT), which is used to determine the key hydrogeological parameters of the subsurface fractured rock aquifer, namely hydraulic conductivity and storativity. This report further refines the standard test method suggested by the KSRM in 2022 and includes practical field application case conducted in volcanic rock aquifers where this investigation procedure has been applied.