• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.378-383
• /
• 1998

Needless to say, the importance of the quality of observed values shall be emphasized in the field of 'TQM', because, the first step of 'TQM' should be some data - observed values. Usually, meaning of the quality of observed values should be, a) accuracy (trueness and precision), b) detection limit, c) cost and so on. However, the authors will describe mainly on b), in this paper. The definitions of technical terms related to 'Detection Limit' are defined in ISO l1843-1 Capability of detection - Part1:Terms and definitions (1998). The most important terms extracted from the above standard are shown in the following table. The application of the 'Detection Limit' to the actual measurement is discussed in this paper.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.534-537
• /
• 2007

The soil nailing was generally using method in practical business, in application of the soil nailing, the analysis was primarily used to Beam-Colum Method, Finite Element Method and Limit Equilibrium Method. Beam-Colum Method and Finite Element Method were able to examine transformation but widely using Limit Equilibrium Method wasn't able to examine transformation and displacement Therefore, this study was focused on presenting stability in comparison with former study-results about horizontal displacement of the soil nailing retaining-walls satisfing a criterion safety factor of Limit Equilibrium. There were performing comparison field measurements and former study-results in first step.

• Communications of the Korean Mathematical Society
• /
• v.20 no.3
• /
• pp.531-538
• /
• 2005

In this paper we derive the central limit theorem for ${\sum}_{i=1}^n\;a_{ni}\xi_i$, where ${a_{ni},\;1\;{\leq}\;i\;{\leq}\;n}$ is a triangular array of nonnegative numbers such that $sup_n{\sum}_{i=1}^n\;a_{ni}^2\;<\;{\infty},\;max_{1{\leq}i{\leq}n}a_{ni}{\rightarrow}0\;as\;n\;{\rightarrow}\;{\infty}\;and\;\xi'_i\;s$ are a linearly negative quadrant dependent sequence. We also apply this result to consider a central limit theorem for a partial sum of a generalized linear process $X_n\;=\;\sum_{j=-\infty}^\infty\;a_k+_j{\xi}_j$.

• Explosives and Blasting
• /
• v.31 no.2
• /
• pp.50-58
• /
• 2013

Since various types of safety facilities have been located around blasting construction site, each of the institutions with regard to blast works has prepared limit criterion of blast vibration, respectively. But these criterions applied for limiting vibration are causing harmful effect including construction cost increasement and construction time extension due to exceedable high level application. In this study, more reasonable limit of blast vibration was suggested after reviewing criterions based on existing design and construction cases and analyzing of problems of applied criterions.

• Journal of the Korean Mathematical Society
• /
• v.43 no.3
• /
• pp.529-538
• /
• 2006

In this paper we derive the central limit theorem for ${\sum}^n_{i=l}\;a_{ni}{\xi}_{i},\;where\;\{a_{ni},\;1\;{\le}\;i\;{\le}n\}$ is a triangular array of non-negative numbers such that $sup_n{\sum}^n_{i=l}\;a^2_{ni}\;<\;{\infty},\;max_{1{\le}i{\le}n\;a_{ni}{\to}\;0\;as\;n{\to}{\infty}\;and\;{\xi}'_{i}s$ are a linearly positive quadrant dependent sequence. We also apply this result to consider a central limit theorem for a partial sum of a generalized linear process of the form $X_n\;=\;{\sum}^{\infty}_{j=-{\infty}}a_{k+j}{\xi}_{j}$.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.184-192
• /
• 2017

BACKGROUND: This study was performed to evaluate the residue dissipation of boscalid and spinetoram on crown daisy and sweet pepper affected by the morphology of the crop. The half-lives and dissipation rate constants for boscalid and spinetoram on crown daisy and sweet pepper were calculated. And then lower limit of 95% confidence interval for dissipation rate constant could be used to propose the pre-harvest residue limit. METHODS AND RESULTS: The pesticide products diluted according to the pesticide label were applied one time on crown daisy and sweet pepper at 2 field sites, respectively. Initial concentration of boscalid and spinetoram on crown daisy after application were in the range of 72.80~117.15 mg/kg and 2.82~4.67 mg/kg, respectively. And Initial concentration of boscalid and spinetoram on sweet pepper were in the range of 1.58~1.62 mg/kg and 0.10~0.21 mg/kg, respectively. Boscalid and spinetoram for crown daisy dissipted below the maximum residue limit(MRL) at 10 and 2 days after application, respectively. All residues concentration of boscalid and spinetoram for sweet pepper below the MRL at 0 day after application. The half-lives based on dissipation rate constant for boscalid and spinetoram on crown daisy were 4.2~4.9 days and 3.0~2.4 days respectively. And the half-lives for boscalid and spinetoram on sweet pepper were 6.7~7.0 days and 2.8~4.0 days respectively. CONCLUSION: The difference in initial concentration of boscalid and spinetoram among crop commodities were due to different crop morphology with larger surface areas. This study was suggested that pre-harvest residue limit would be calculated from lower limit of 95% confidence interval for dissipation rate constant and would be useful to protect consumers by controlling the pesticide residues in crop.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.351-354
• /
• 1989

In a speed_controlled system with cascade control which shows an optimal performance in the linear case, limit cycles can occur due to backlash. The various effects observed can be explained with the aid of the describing function. With a first-order load torque observer these limit cycles can be avoided. Moreover the dynamic performance improves considerably and the range of application of cascade control is extended.

• Communications for Statistical Applications and Methods
• /
• v.8 no.1
• /
• pp.117-126
• /
• 2001

We provide a simple chi-squared test of multivariate normality based on rectangular cells on the spherical data. This test is simple since it is a direct extension of the univariate chi-squared test to multivariate case and the expected cell counts are easily computed. We derive the limiting distribution of the chi-squared statistic via the conditional limit theorems. We study the accuracy in finite samples of the limiting distribution and then compare the poser of our test with those of other popular tests in an application to a real data.

• Fibers and Polymers
• /
• v.6 no.3
• /
• pp.224-228
• /
• 2005

This paper focuses on the application of a novel mathematical limit approach derived for K/S values in reactive dyeing of cotton fabrics. The relation obtained from Kubelka-Munk equation is used because the Kubelka-Munk equation is the basic relationship among fabric reflectance, fabric dye content and dyestuff characteristics. The limit approach derived in a former paper is applied to the laboratory dyeings and the dyeing behavior of some reactive dyes on cotton knitted fabric has been obtained. The results of the laboratory experiments are discussed using the new mathematical approach. When the actual K/S values obtained from the dyeings and the calculated K/S values derived by the limit approach are considered independently, it is observed that the limit relation is val id for low dye concentration applications. When the K/S values are calculated taking the K/S value of the initial dyeing concentration $(0.1\;\%\;owf)$ as the starting concentration by applying the result of the derived limit approach, the calculated K/S values fit with the ones obtained in actual dyeings. It is concluded that the novel approach presented in the paper can be used in calculating the K/S values when the initial dyeings at low dye concentrations are carefully carried out.

• IE interfaces
• /
• v.12 no.3
• /
• pp.354-361
• /
• 1999

In this paper, resource leveling heuristics are developed for ship erection scheduling. The heuristics, which enable scheduling with limited resources, are composed of the gradual resource limit decrease anti the resource allocation. At first, earliest start(ES) schedule is derived by PERT to get initial resource limit. And then, the heuristics lower the resource limits by a given increment and derive a new schedule from day-by-day resource allocation procedure. The procedure is repeated until the project duration reaches at the given ship erection duration, called dock cycle. Through the application of the heuristics for real world ship erection projects, wc can observe significant improvement in resource leveling.