• Proceedings of the Korean DIstribution Association Conference
• /
• 2002.05a
• /
• pp.31-59
• /
• 2002

Recently there are many changes of logistics environment Such as integrated logistics information system, the rapid growth of the domestic and international small package express service and third party logistics with Electronic Commerce. At this time it is very important to deliver to customers the goods sold through EC speedy, accurately and safely. That is to say, the role of small package express service is very important at EC times. The bottlenecks of small package express service in the circumstances of EC are the weakness of EC operating company and small package express service provider the shortage of distribution centre and cargo terminal, the shortage of skilled man with related small package express service etc. So, I suggested that for activation of EC it is necessary to strengthen the strategic alliances, introduce GPS and use the third party logistics positively in the side of small package express service provider. And it is necessary to prepare for the settlements of traffic problems, support the introduction of integrated logistics service, logistics information system, deregulate restriction such as weight limit of vehicles in the side of the government. And to government support throughout extending nation's SOC, deregulation, support to small package express service terminal, permit to stopping & parking in downtown, abolishing a no passing zone, permit to being employed foreigner. Also this service involves ensuring that the product will arrive when wanted, and in an undamaged condition.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.4
• /
• pp.263-267
• /
• 2007

Parabens are used in nearly all types of cosmetics and toiletries because they are formulated well and have broad spectrum of activity, interness, low costs and excellent chemical stability in relation to pH. 2-phenoxyethanol and chlorphenesin are common preservatives which are usually used in combination with parabens in cosmetics. Toxicity of parabens is generally low but application of parabens to damaged or broken skin has resulted in sensitization. Moreover, the possibility of their estrogenic potential, anesthetic effects and reproductive toxicity has been reported. Consequently there are some regulations in use of parabens. And the maximum permitted concentrations of chlorphenesin and 2-phenoxyethanol in cosmetic products are authorized by the same reasons. So it is important to control and estimate the amount of parabens in products. In this article, we proposed a valid method for the simultaneous determination of 8 preservatives including parabens in a short time using ultra performance liquid $chromatography^{TM}\;(UPLC^{TM})$. Separation of eight components was achieved in less than 10 min and resolutions were reasonable (USP resolution ${\geqq}\;2$). And limit of detection and quantification were evaluated. The method was suitably validated for specificity, linearity, precision (repeatability, intermediate precision) and accuracy for assay (recovery) based on International conference on harmonisation (ICH) guideline. The method was applicable to analysis of preservatives in cosmetic products.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.61-68
• /
• 2017

The key quality attributes of the pressed powder, one of base makeup products, are skin-affinity and spreadability. In general, there was a limit to meet skin-affinity and spreadability simultaneously, which are opposite attributes each other. In this study, air jet mill process was tried to satisfy two main properties. Skin-affinity was improved by a wet coating of sericite with a mixture of lauroyl lysine (LL) and sodium cocoyl glutamate (SCG). The application of mono-dispersed polymethyl methacrylate (PMMA) and diphenyl dimethicone/vinyl diphenyl dimethicone/silsesquioxane crosspolymer (DDVDDSC) improved both qualities. Air jet mill process has been mainly applied in the pharmaceutical and food industries, and is a method used for processing powder materials in cosmetic field. In this study, we were able to complete makeup cosmetics with an optimum particle size $6.8{\mu}m$ by combining the air jet mill process at the manufacturing stage. It was confirmed that the Ti element was uniformly distributed throughout the cosmetics by EDS mapping, and that the corners of the tabular grains were rounded by SEM analysis. It is considered that this can provide an effect of improving the spreadability when the cosmetic is applied to the skin by using a makeup tool. LL with excellent skin compatibility and SCG derived from coconut with little skin irritation were wet coated to further enhance the adhesion of sericite. SEM images were analyzed to evaluate effect of the dispersion and uniformity of PMMA on spreadability. With the spherical shapes of similar size, it was found that the spreading effect was further increased when the distribution was homogeneously mono-dispersed. The dispersion and spreadability of PMMA were confirmed by measuring the kinetic friction and optimal content was determined. The silicone rubber powder, DDVDDSC, was confirmed by evaluating the hardness, spreading value, and drop test. Finally, it was found that the dispersion of PMMA and silicone rubber powder affected spreadability. Such makeup cosmetics have excellent stability in drop test while having appropriate hardness, and good stability over time. Taken together, it is concluded that air jet mill process can be utilized as a method to improve skin-affinity and spreadability of the pressed powder.

• Korean Security Journal
• /
• no.44
• /
• pp.85-116
• /
• 2015

Found in 23 Dec 1953 to cope with illegal fishing of foreign ships and coastal guard duty, Korea Coast Guard was re-organized as an office under Ministry of Public Safety since the outbreak of sinking of passenger ship "Sewolho". In the course of re-organization, intelligence and investigation duty were transferred to Police Department except "Cases happened on the sea". But the definition of intelligence duty is vague and there are lots of disputes over the jurisdiction and range of activities. With this situation in consideration, the object of this study is to analyse legal and institutional characteristic of KCG Intelligence, to compare them to that of Police Department, foreign agencies like Japan Coast Guard and US Coast Guard, to expose the limit and to suggest solution. To summarize the conclusion, firstly, in the legal side, there is no legal basis on intelligence in [The Government Organization Act], no regulation for mission, weak basis in application act. Secondly, in the institutional side, stated in the minor chapter of [The Government Organization Act], 'the cases happened on sea' is a quite vague definition, while guard, safety, maritime pollution duty falls under 'on the sea' category, intelligence fell to 'Cases happened on the sea' causing coast guard duty and intelligence have different range. In addition, reduced organization and it's manpower led to ineffective intelligence activities. In the case of Police Department, there is definite lines on 'administration concerning public security' in [The Government Organization Act], specified the range of intelligence activities as 'collect, make and distribute information concerning public security' which made the range of main duty and intelligence identical. Japanese and US coast guards also have intelligence branch and performing activities appropriate for the main missions of the organizations. To have superiority in the regional sea, neighboring countries Japan and China are strengthening on maritime power, China has launched new coast guard bureau, Japan has given the coast guard officers to have police authority in the regional islands, and to support the objectives, specialized intelligence is organized and under development. To secure maritime sovereignty and enhance mission capability in maritime safety duty, it is strongly recommended that the KCG intelligence should have concrete legal basis, strengthen the organization and mission, reinforce manpower, and ensure specialized training administrative system.

• Korea Journal of Hospital Management
• /
• v.7 no.2
• /
• pp.52-79
• /
• 2002

The hospital is characterized by it's remarkable labor industry and human resources input by unit. Recently, the administrative personnel are recognized as an important staff to provide a hospital guidance to consumer and also easiness for consumer's visit to hospital. The purpose of this study is to find the organizational effectiveness of the administrative personnel in hospitals. The survey data involved in the study was derived from 229 personnels working in 3 medium and small sized hospitals and 1 university hospital in Inchon area. The major finding are as follows; 1. The organizational efficiency in accordance with the general characteristics of subjects in order of over 31 years of age, university graduates, long-term tenure and high position is higher, whereas, in as much as wage and well trained personnels in are higher, general hospital's organizational efficiency is higher in comparison with those of university hospital. 2. The organizational efficiency in accordance with satisfaction and the psychological motive contributional factors is higher as much as the high satisfactory level in every hospitals in general. 3. The organizational efficiency in accordance with the factors of job characteristics is higher in as much as difficulty of the jobs is lesser, however there was not statically significance. In as much as job standard level is higher and the more job responsibility the higher organizational efficiency. It was obvious that the higher professional expertise as well as the training and application level are improving the organizational efficiency. 4. The organizational efficiency in accordance with the factors of structural characteristics was higher in as much as the intercommunication was smooth and the structural formalization level are higher, however there was not statically significance between the participation level of decision making and the organizational efficiency. 5. In as much as older age, management of organization and the job level are satisfied, the higher structural formalization level, the smooth intercommunication have affected as major influence factors of organizational efficiency. 6. In the university hospitals is satisfied in the management and job level of hospital organization as there are no difficult jobs while the level of hospital's organizational formality is high and the intercommunication is smooth, which are improving the organizational efficiency. In the general hospitals is also satisfied the management and job level of hospital organization and psychological motive contributional factors is higher, it was apparent that the organizational efficiency is higher in as much as the level of job standardization is high and the intercommunication is smooth. As a result of this study, in order for improving the organizational efficiency of administrative personnel in hospitals, the management and job level as well as personal relation are preferably satisfied, whereas formalization of organization, intercommunication and etc. should be satisfied, and, therefore, it is advisable to buildup discriminated organizational management and environment for different division on the basis above factors. Since this study is carried on four hospitals in Inchon area, there is a certain limit to generalize its result to all domestic hospitals, nevertheless the gallop poll was made by developing the questionnaires with reasonability and reliability. Especially. as the study was carried by analyzing the comparison of influence factors' difference of organizational efficiency in accordance with the divisional characteristics of the university and general hospitals.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.46-53
• /
• 2010

Purpose: The static image of nuclear medicine study should be acquired without a motion, however, it is difficult to acquire static image without movement for the serious patients, advanced aged patients. These movements cause decreases in reliability for quantitative and qualitative analysis, therefore re-examination was inevitable in the some cases. Consequently, in order to improve the problem of motion artifacts, the authors substituted the dynamic acquisition technique for the static acquisition, using motion correction. Materials and Methods: A capillary tube and IEC body phantom were used. First, the static image was acquired for 60 seconds while the dynamic images were acquired with a protocol, 2 sec/frame${\times}$30 frames, under the same parameter and the frames were summed up into one image afterwards. Also, minimal motion and excessive motion were applied during the another dynamic acquisition and the coordinate correction was applied towards X and Y axis on the frames where the motion artifact occurred. But the severe blurred images were deleted. Finally, the resolution and counts were compared between the static image and the summed dynamic images which before and after applying motion correction, and the signal of frequency was analysed after frequency spatial domain was transformed into 2D FFT. Supplementary examination, the blind test was performed by the nuclear medicine department staff. Results: First, the resolution in the static image and summed dynamic image without motion were 8.32 mm, 8.37 mm on X-axis and 8.30 mm, 8.42 mm on Y-axis, respectively. The counts were 484 kcounts, 485 kcounts each, so there was nearly no difference. Secondly, the resolution in the image with minimal motion applying motion correction was 8.66 mm on X-axis, 8.85 mm on Y-axis and had 469 kcounts while the image without motion correction was 21.81 mm, 24.02 mm and 469 kcounts in order. So, this shows the image with minimal motion applying motion correction has similar resolution with the static image. Lastly, the resolution in the images with excessive motion applying motion correction were 9.09 mm on X-axis, 8.83 mm on Y-axis and had 469 kcounts while the image without motion correction was 47.35 mm, 40.46 mm and 255 kcounts in order. Although there was difference in counts because of deletion of blurred frames, we could get similar resolution. And when the image was transformed into frequency, the high frequency was decreased by the movement. However, the frequency was improved again after motion correction. In the blind test, there was no difference between the image applying motion correction and the static image without motion. Conclusion: There was no significant difference between the static image and the summed dynamic image. This technique can be applied to patients who may have difficulty remaining still during the imaging process, so that the quality of image can be improved as well as the reliance for analysis of quantity. Moreover, the re-examination rate will be considerably decreased. However, there is a limit of motion correction, more time will be required to successfully image the patients applying motion correction. Also, the decrease of total counts due to deletion of the severe blurred images should be calculated and the proper number of frames should be acquired.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1075-1082
• /
• 2016

In order to calculate the optimum installation interval between a speed hump and hump type crosswalk that are installed continuously in succession, this study examined the speed of a vehicle that passes different intervals between speed humps and hump type crosswalks from the approach section of a roundabout having a maximum speed limit of 30km/h; analyzed the effects of speed humps and hump type crosswalks installed continuously in succession on vehicle driving speed; and simulated the optimum installation height of hump type crosswalk. As a result, the following conclusion was drawn. First, it was found that the optimum interval between a speed hump and hump type crosswalk, which are the representative traffic calming techniques for reducing vehicle speed, to control vehicle speed under 30km/h is 30m. Second, as a result of comparing the deceleration of a vehicle that pass hump type crosswalks, it was found that if the installation interval is 65 m and above, a speed hump and hump type crosswalk had no effect. Therefore, it is desirable that the maximum installation interval between a speed hump and hump type crosswalk for controlling vehicle speed within a fixed road section should not exceed 65m. Third, the analysis showed that the optimum installation height of hump type crosswalk is 6-8cm in case vehicle speed at the approach section is 20km/h or lower, 8-10cm in case of 30km/h, and 10cm in case of 30km/h or higher, respectively. Fourth, even at a road section on which a speed hump and hump type crosswalk are installed, speed reduction effects may sometimes be insignificant due to a driver's studying effect, traffic conditions and so on. Thus, it is judged that speed reduction effects will be greater if several traffic calming techniques such as speed hump, chicane, and choker are applied at the same time. Therefore, in case of applying traffic calming techniques for the purpose of reducing vehicle speed in order to promote pedestrian safety, the composite application of several techniques should be considered.

• The Korean Journal of Pesticide Science
• /
• v.15 no.3
• /
• pp.269-277
• /
• 2011

Recent outbreak of new diseases and pests which were introduced from abroad, seriously hampered both quality and safety of paprika fruits. This study has been carried out to aid an establishment of guideline for safe use of pesticides and reduction of their residues on paprika. Systemic fungicides boscalid and pyraclostrobin of either mixed (a.i.; 13.6+6.8%) or single (a.i.; 47 and 18.8%, respectively) water dispersible granule formulation(WG) products were sprayed with recommended or double dosage on paprika grown in green house at March and June. To draw pre-harvest residue limit, residues of each fungicide were analyzed from fruits collected eight times from 18 to 1 day pre-harvest. The biological half-lives of both boscalid and pyraclostrobin in mixed formulation in March and June were slightly shorter than those of single formulation which ranged from 14.4 to 20.1 days. Residue levels of both fungicides of single formulation in fruits in June were about one lower compared to those in March. However, application of double dosage frequently exceeded MRLs from fruits grown both seasons. These results showed that residue levels on fruits persisted longer period of time, more than two weeks, and so the case applied in winter season. The dissipation of fungicides on leaves and fruits was compared. The distribution of both fungicides in leaves was 20-200 times higher than that of fruits and persisted up to 18 days of pre-harvest period at the concentration of 10-40 ${\mu}g\;g^{-1}$. This study indicated that the mixed formulation product exhibited low residues in fruits, but high and long enough to pathogen growth in leaves.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.855-866
• /
• 2017

Several research cases using remote sensing methods to analyze changes of storage and dynamics of groundwater aquifer were reviewed in this paper. The status of groundwater storage, in an area with regional scale, could be qualitatively inferred from geological feature, surface water altimetry and topography, distribution of vegetation, and difference between precipitation and evapotranspiration. These qualitative indicators could be measured by geological lineament analysis, airborne magnetic survey, DEM analysis, LAI and NDVI calculation, and surface energy balance modeling. It is certain that GRACE and InSAR have received remarkable attentions as direct utilization from satellite data for quantification of groundwater storage and dynamics. GRACE, composed of twin satellites having acceleration sensors, could detect global or regional microgravity changes and transform them into mass changes of water on surface and inside of the Earth. Numerous studies in terms of groundwater storage using GRACE sensor data were performed with several merits such that (1) there is no requirement of sensor data, (2) auxiliary data for quantification of groundwater can be entirely obtained from another satellite sensors, and (3) algorithms for processing measured data have continuously progressed from designated data management center. The limitations of GRACE for groundwater storage measurement could be defined as follows: (1) In an area with small scale, mass change quantification of groundwater might be inaccurate due to detection limit of the acceleration sensor, and (2) the results would be overestimated in case of combination between sensor and field survey data. InSAR can quantify the dynamic characteristics of aquifer by measuring vertical micro displacement, using linear proportional relation between groundwater head and vertical surface movement. However, InSAR data might now constrain their application to arid or semi-arid area whose land cover appear to be simple, and are hard to apply to the area with the anticipation of loss of coherence with surface. Development of GRACE and InSAR sensor data preprocessing algorithms optimized to topography, geology, and natural conditions of Korea should be prioritized to regionally quantify the mass change and dynamics of the groundwater resources of Korea.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.1
• /
• pp.22-30
• /
• 1982

Water quality of downstream of the Nagdong river, using for agricultural irrigation of the Gimhae plain, were observed. Water temperature, turbidity, residue, pH, BOD, COD, DO, hardness, chloride, sulphate, phosphate, inorganic nitrogenous compounds, sodium, general bacteria, E. coli and heavy metals of the water were investigated at Daejeo, Sikman, Bongrim, Noksan, Machal and Jangyou pumping stations in the Gimhae plain in May, July and October, 1981. The results obtained were as follows; 1) Average value of analyzed components of the water at all sampling sites were 7.8 pH, 6.3 ppm BOD, 6.5 ppm COD, 6.4 ppm DO, 231 ppm hardness, 582 ppm Cl-, 412 ppm $SO_4--$, 2.32 ppm $PO_4---$, 3.8 ppm $NH_4+,\;478\;ppm\;Na+$, 2964 No. /100 ml total coliform, 0.0040 ppm Cd, 0.0066 ppm Pb, respectively. 2) The most heavily polluted site of all investigated ones was Sikman. It seemed to be caused by the vast quantity of wastewater discharged from industrial district in Gimhae city. The next polluted sites were Bongrim, Daejeo and Noksan, and comparatively less polluted sites were Machal and Jangyou, judging from both appearance and physicochemical observation. 3) At Sikman, the most heavily polluted site, average value of components were 8.0 pH, 8.1 ppm BOD, 8.2 ppm COD. These values were close to the limit point of agricultural water quality standard of 8.0 ppm BOD (COD). 4) Any apparent variation was not observed by the sampling season in most components except DO and $NH_4+$. DO of October was higher than that of May or July but $NH_4+$ was low. 5) $NH_4+$ content was comparatively high in downstream of the Nagdong river of which water is used as the agricultural irrigation in the Gimhae plain. Therefore, fertilizer application on the farming land must make account of nitrogen content of the irrigation water 6) It was considered that chloride and sodium contents would not influence the crop cultivation in common season, but in dry season irrigation must be done carefully.