• Title/Summary/Keyword: Application Conditions

Search Result 5,937, Processing Time 0.036 seconds

Adhesive Performance of Waterproofing System on Concrete Substrate with Moisture Condition (콘크리트 표면 함수비에 따른 교면방수재료의 인장접착성능)

  • 박성기;심재원;이병덕
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2001.05a
    • /
    • pp.979-984
    • /
    • 2001
  • Poor water-proofing integrity is related to many factors : site procedure, workmanship, weather. substrate conditions, installation(including asphalt application) conditions. The evaluation of adhesive properties tested by concrete surface moisture and asphalt application was based on laboratory test and observations. This report describes the pull-off test results of waterproofing systems currently used for installing and reparing for concrete bridge decks. The test results showed that the moisture condition fully affected the adhesive properties of sheet membranes and sealer but partially for liquid membranes.

  • PDF

Field Application of High Strength Concrete under Cold Weather Conditions (650kgf/$\textrm{cm}^2$ 고강도 콘크리트 한중 시공사례)

  • 정재동;노재호;한정호;조일호
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 1994.04a
    • /
    • pp.260-265
    • /
    • 1994
  • High strength concrete(65MPa) was used for construction of the bulk cement storage silo by using sliding form. This paper presents mix design, production, quality control and experience with field application of high strength concrete under cold weather conditions. It is shown to be possible to produce high strength concrete of compressive strength of 50~60 MPa by using high-range water reducer to lower w/c ratio with appropriate quality control.

  • PDF

Development of a Smartphone Application to Investigate Unsurfaced Road Conditions in Mines (광산 비포장도로 상태 조사를 위한 스마트폰 애플리케이션 개발)

  • Choi, Yosoon;Kim, Hunmu;Suh, Jangwon
    • Tunnel and Underground Space
    • /
    • v.28 no.6
    • /
    • pp.555-568
    • /
    • 2018
  • To perform efficient and safe haulage operations in mines, the condition of unsurfaced roads where dump trucks are moving should be regularly investigated, and systematic maintenance should be carried out according to the results. In this study, we developed a smartphone application that can be used to periodically investigate the unsurfaced road conditions in mines. Using the developed application, necessary data can be easily collected on site to evaluate the condition of unsurfaced roads according to the Unsurfaced Road Condition Index (URCI) evaluation system presented by the US Army Corps of Engineers. The smartphone application was tested at several sections of unsurfaced road in the Ilkwang mine, Busan, Korea. The results showed that the field investigation about 7 factors considered in the URCI evaluation system can be conducted through the user interface screen, and the URCI value can be calculated in the field to evaluate the condition of unsurfaced road. The smartphone application developed in this study can be useful for surveying and evaluating the unsurfaced road conditions at the mine site.

The Study of Behavioral Intention of Delivery Application by applying the Extended Technology Acceptance Mode (확장된 기술수용모델을 적용한 외식업체 배달앱 이용의도 연구)

  • Baek, Seunghee;Kim, Youngshin
    • The Korean Journal of Food And Nutrition
    • /
    • v.31 no.1
    • /
    • pp.185-194
    • /
    • 2018
  • The purpose of this study was to investigate the structural relationship between environmental factors, personal factors, ease of use, usefulness and behavioral intention of delivery application by applying the extended Technology Acceptance Model (TAM). An online survey was conducted based on a self-administered questionnaire to a selected sample who had an experience of using delivery application at least once. The survey was conducted in September, 2017. The data obtained was analyzed using SPSS 24.0 for windows and AMOS 24.0. The findings of the study showed that among environmental factors, social influence had a significant effect on perceived usefulness and perceived ease of use and facilitating conditions had a significant effect on perceived ease of use only. Among personal factors, anxiety had a significant effect on perceived usefulness, while innovation had a significant effect on perceived ease of use. Both of perceived usefulness and perceived ease of use had a significant effect on behavioral intention. This study suggests the importance of environmental and personal factors for increase of behavioral intention of delivery application.

Variation of the Verification Error Rate of Automatic Speaker Recognition System With Voice Conditions (다양한 음성을 이용한 자동화자식별 시스템 성능 확인에 관한 연구)

  • Hong Soo Ki
    • MALSORI
    • /
    • no.43
    • /
    • pp.45-55
    • /
    • 2002
  • High reliability of automatic speaker recognition regardless of voice conditions is necessary for forensic application. Audio recordings in real cases are not consistent in voice conditions, such as duration, time interval of recording, given text or conversational speech, transmission channel, etc. In this study the variation of verification error rate of ASR system with the voice conditions was investigated. As a result in order to decrease both false rejection rate and false acception rate, the various voices should be used for training and the duration of train voices should be longer than the test voices.

  • PDF

Application of Characteristic Boundary Conditions

  • Hong Seung Gyu;Lee Gwang Seop
    • 한국전산유체공학회:학술대회논문집
    • /
    • 1996.05a
    • /
    • pp.74-84
    • /
    • 1996
  • Characteristic boundary conditions are discussed in conjunction with a flux-difference splitting formulation as modified from Roe's linearization. Details of how one can implement the characteristic boundary conditions which are compatible with the discrete formulation at interior points are given for different types of boundaries including subsonic outflow and adiabatic wall. The latter conditions are demonstrated through computation of supersonic ogive-cylinder flow at high angle of attack and the computed wall pressure distribution is compared with experiment.

  • PDF

A Study on the Salix's Biotechnical Application (Salix종의 생물공학적 이용성에 관한 연구)

  • 김혜주;이준헌
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.26 no.3
    • /
    • pp.143-151
    • /
    • 1998
  • To develop restoration technologies of natural environment, which is destroyed through the urbanization, industrialization, and the increase of leisure industry, the development of environmental restoration material and those application is greatly needed. Concerning this current issue, an experiment has been conducted to test and an experiment has been conducted to test and analyze the conditions of nutritonal propagation of willow cutting, which is known as a plant with rapid propagation and good growth capability under bad soil conditions and its wide ecological amplitude. 24 various kinds of willow cuttings -2~6 cuttings for each species -were placed into the earth for 57 days and measured the lengths and the diameters of willow cuttings, the possibility of root formation, the total number, and the total length of new shoots and roots. 23 among 24 willow cuttings tested were showing a great growing capacity and a number of new shoots and roots were observed in a relatively short time. This proved that salix is an adequate plant material for quick environmental restoraton . Besides, those willow cuttings could be classified for different site conditions through comparing the ratio of the underground part to the aboveground in total length. The results are as follows; S. dependens, S. matsudana, S. babylonica are the most suitable species for quick vegetaton and S. gracilistyla,S. myricoides,S. alba 'sercia' for erosioni control.

  • PDF

A Biostimulant Preparation of Brown Seaweed Ascophyllum nodosum Suppresses Powdery Mildew of Strawberry

  • Bajpai, Sruti;Shukla, Pushp Sheel;Asiedu, Samuel;Pruski, Kris;Prithiviraj, Balakrishnan
    • The Plant Pathology Journal
    • /
    • v.35 no.5
    • /
    • pp.406-416
    • /
    • 2019
  • Strawberry, an important fruit crop, is susceptible to a large number of pathogens that reduce fruit quality and productivity. In this study, the effect of a biostimulant prepared from Ascophyllum nodosum extract (ANE) (0.1%, 0.2%, and 0.3%) was evaluated on powdery mildew progression under greenhouse and field conditions. In the greenhouse, application of 0.2% ANE showed maximum reduction in powdery mildew progression as compared to the control. Forty-eight hour post-inoculation, foliar spray of 0.2% ANE reduced spore germination by 75%. Strawberry leaves sprayed with ANE showed higher total phenolic and flavonoid content in response to powdery mildew infection. Furthermore, application of ANE elicited defense response in strawberry plants by induction of defense-related enzymes, such as phenylalanine ammonia lyase, polyphenol oxidase, and peroxidase activity. In field conditions, foliar spray of 0.2% ANE showed a reduction of 37.2% of natural incidence of powdery mildew infection as compared to the control. ANE sprayed plant also reduces the severity of powdery mildew infection under natural conditions. These results indicate that application of ANE induces the strawberry plant's active defense against powdery mildew infection by induction of secondary metabolism and regulating the activities of defense-related enzymes.

Manufacture of Novel Composites Synthesized with Ferromagnetic and Nano-Sized Prussian Blue and D eriving Optimum Conditions (강자성체와 나노사이즈의 프러시안 블루가 합성된 새로운 형태의 복합체 제조 및 최적의 적용 조건 도출)

  • Jong Kyu Kim
    • Korean Journal of Materials Research
    • /
    • v.33 no.4
    • /
    • pp.151-158
    • /
    • 2023
  • In this study, a new type of composite material combined with carbonyl iron, a relatively strong ferromagnetic material, was prepared to overcome the current application limitations of Prussian blue, which is effective in removing radioactive cesium. The surface of the prepared composite was analyzed using SEM and XRD, and it was confirmed that nano-sized Prussian Blue was synthesized on the particle surface. In order to evaluate the cesium removal ability, 0.2 g of the composite prepared for raw cesium aquatic solution at a concentration of 5 ㎍ was added and reacted, resulting in a cesium removal rate of 99.5 %. The complex follows Langmuir's adsorption model and has a maximum adsorption amount (qe) of 79.3 mg/g. The Central Composite Design (CCD) of the Response Surface Method (RSM) was used to derive the optimal application conditions of the prepared composite. The optimal application conditions achieved using Response optimization appeared at a stirring speed of pH 7, 17.6 RPM. The composite manufactured through this research is a material that overcomes the Prussian Blue limit in powder form and is considered to be excellent economically and environmentally when applied to a cesium removal site.

The study on the Proposals for Application to Information Technology in Field Construction (건설 현장의 정보기술 발전 방향에 관한 연구)

  • Kim Sung-Gun;Lee Ung-Kyun;Kang Kyung-In
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2005.05a
    • /
    • pp.207-210
    • /
    • 2005
  • Information Technology (IT) makes a great contribution towards improvement of productivity in construction industry. Because most of researches of construction industry's IT are focused on the whole field of the industry or development of information system, however, these have no regard for conditions in fields. Thus, this study proposes the requirements in order to improve the productivity and efficiency of field execution of construction industry. To achieve this aim, the surveys are conducted of the problems and conditions of IT application on site workers and managers. As a result, the followings are suggested: (1) user training should be exercised continuously, (2) infrastructure of IT constructed, (3) total management system of field execution developed, and (4) the development of IT system focused on fields. Therefore, this study provides meaningful proposal that can be set up basic direction toward IT investment and IT system development.

  • PDF