• Journal of Pharmaceutical Investigation
• /
• v.21 no.4
• /
• pp.215-222
• /
• 1991

The absorption characteristics of itraconazole, which is an antifungal agent, from intestinal segments in the anesthetized rat i1l situ were investigated in order to design an effective oral drug delivery system. The pH-solubility profile of itraconazole, the rate and extent of absorption of itraconazole, the optimal absorption site(s) of itraconazole and the absorption enhancing effect of sodium cholate on itraconazole were examined in the present study. In situ single-pass perfusion method and recirculating perfusion technique using duodenum(D), jejunum(J) and ileum(I) were employed for the calculation of apparent permeability(Pe) and apparent first-order rate constant(Kobs). respectively. The results of this study were as follows; (1) Itraconazole showed appreciable aqueous solubility only at pH values of below 2.0. (2) pe(cm/sec) decreased in the following order: $D(10.24{\pm}1.78{\times}10^{-4})>J(8.86{\pm}0.79{\times}10^{-4})>I(3.78{\pm}0.13 X 10^{-4})$. (3) $Kobs(min^{-1})$ decreased in the following order: $J(17.12{\pm}3.19{\times}10^{-3})>D(13.37{\pm}0.6{\times}10^{-3})>I(11.05{\pm}0.91{\times}10^{-3})$. (4) The solubility of itraconazole markedly increased with the increase of the concentration of sodium cholate. (5) The addition of 10 mM sodium cholate significantly increased the apparent first-order rate constant of itraconazole in the ileum by a factor of 6.8.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.281-284
• /
• 2003

Multi-code CDMA is an appropriate scheme for transmitting high rate data. However, dynamic range of the signal is large, and power amplifier with good linearity is required. Code select CDMA (CS/CDMA) is a variation of multi-code CDMA scheme that ensures constant amplitude transmission. In CS/CDMA input data selects multiple orthogonal codes, and sum of these selected codes are MPSK modulated to convert multi-level symbol into different carrier phases. CS/CDMA system employs level clipping to limit the number of levels at the output symbol to avoid hish density of signal constellation. In our previous work we showed that by encoding input data of CS/CDMA amplitude of the output symbol can be made constant. With this coding scheme, level clipping is not necessary and the output signal can be BPSK modulated for transmission. In this paper we show that the constant amplitude coded(CA-) CS/CDMA transmitter can be implemented using only logic gates, and the hardware complexity is very low. In the proposed transmitter architecture there is no apparent redundant encoder block which plays a major role in the constant amplitude coded CS/CDMA.

• Textile Coloration and Finishing
• /
• v.8 no.3
• /
• pp.36-51
• /
• 1996

In order to investigate the degradation behavior of PET fabrics, sodium diethylene glycolate (SDEG)-diethylene glycol (DEG) solutions were prepared and PET fabrics were treated in the solution. The dissolution rate constant and apparent activation energy of the PET fabrics were calculated by Eyring's and Arrhenius's equation respectively and measured dyeing properties, moisture and antistatic properties. Then compared SDEG-treated fabrics with NaOH-treated. The results were as follows; 1. PET fabrics decreased their weight in SDEG-DEG solution, and the decreasing rate showed a linear relationship to the treating time at constant temperature and concentration of SDEG-DEG solution. 2. The dissolution rate constant showed a linear relationship to the concentration of SDEGDEG solution and an exponential relationship to treating temperature. 3. Apparent activation energy of dissolution was 23.45 kcal/mol. 4. The K/S values and the ΔL values of fabrics treated with SDEG-DEG solution are higher and lower respectively than fabrics treated with NaOH. 5. SDEG-DEG solution treatment improved fabric's moisture regain and it reached almost maximum at about 40% weight loss. 6. In the both reagent the light, wet and sublimation fastness of fabrics are similar. 7. SDEG-DEG solution gave more electrical discharge effect to the fabrics than that of NaOH. 8. NaOH treated PET microfiber have crater-like surface, while SDEG-DEG solution give bathochromic effect to the PET microfiber because which has wrinkles on the surface.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.3
• /
• pp.145-152
• /
• 1990

Zirconium pyrithione complex was prepared by reaction of sodium-pyrithione solution and zirconyl chloride solution. The physico-chemical properties of the complex was examined by means of IR, XRD, DSC and NMR. And the stability of Zr-complex was investigated on the basis of accelerated stability analysis under conditions of temp. elevation, UV radiation and pH dependence. The result indicates that the ratio of the ligand to metal in Zr-pyrithione complex was determined 4:1, and its stability constant was $4.643{\times}10^4$. The rate order of decomposition of the complex was apparent first-order reaction of which rate constant and the decomposition rate was not only accelerated by effect of heat and UV radiation but was catalyzed by specific acid-base catalysis considered the pH dependence for the hydrolysis of the complex and the suspension was most stable over the range pH 4-8 indicating that solvent catalysis is the primary made of reaction in this region.

• Journal of the Korean Applied Science and Technology
• /
• v.4 no.1
• /
• pp.67-71
• /
• 1987

The transesterification reaction between diethanolamine and methyl methacrylate was kinetically investigated in the presence of various metal acetate catalysts at $120^{\circ}C$. The amount of reacted methyl methacrylate was measured by gas chromatography and liquid chromatography, and the reaction rate also measured from the amount of reaction products and reactants under each catalyst. The transesterification reaction was carried out in the first order with respect to the concentration of diethanolamine and methyl methacrylate, respectively. The over-all order is 2nd. The apparent rate constant was found to obey first-order kinetics with respect to the concentration of catalyst. The maximum reaction rate was appeared at the range of 1.4 to 1.6 of electronegativity of metal ions and instability constant of metal acetates.

• Journal of Surface Science and Engineering
• /
• v.44 no.4
• /
• pp.131-136
• /
• 2011

A kinetic study has been made for the growth of nanocrystalline diamond (NCD) particles to a continuous thin film on silicon substrate in a microwave plasma chemical vapor deposition reactor. Parameters of deposition have been microwave power of 1.2 kW, the chamber pressure of 110 Torr, and the Ar/$CH_4$ ratio of 200/2 sccm. The deposition has been carried out at temperatures in the range of $400\sim700^{\circ}C$ for the times of 0.5~16 h. It has been revealed that a continuous diamond film evolves from the growth and coalescence of diamond crystallites (or particles), which have been heterogeneously nucleated at the previously scratched sites. The diamond particles grow following an $h^2$ = k't relationship, where h is the height of particles, k' is the particle growth rate constant, and t is the deposition time. The k' values at the different deposition temperatures satisfy an Arrhenius equation with the apparent activation energy of 4.37 kcal/mol or 0.19 eV/ atom. The rate limiting step should be the diffusion of carbon species over the Si substrate surface. The growth of diamond film thickness (H) shows an H = kt relationship with deposition time, t. The film growth rate constant, k, values at the different deposition temperatures show another Arrhenius-type expression with the apparent activation energy of 3.89 kcal/mol or 0.17 eV/atom. In this case, the rate limiting step might be the incorporation reaction of carbon species from the plasma on the film surface.

• Journal of the Korean Applied Science and Technology
• /
• v.9 no.2
• /
• pp.141-148
• /
• 1992

Transesterification reactions (methyl methacrylate with diethanolamine, ethylene glycol with dimethylphthalate) were kinetically investigated in the presence of zinc compound catalysts at $120{\sim}170^{\circ}C$ The amount of reactants was measured by gas chromatography. and the reaction rates also measured from the amount of reaction products and reactants upon each catalyst. The transesterification reactions were carried out under the first order conditions respect to the concentration of reactants, respectively, The overall reaction order was 2nd. The apparent rate constant (k') was found to obey first kinetics with respect to the concentration of catalyst. It shows that according to an increase in basicity of anionic species the rate constant increase, and that a linear relationship exists between ln k and pKa in transesterification reaction of methyl methacrylate with diethanolamine.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.11
• /
• pp.1760-1772
• /
• 2006

Mature acetylcholinesterase (AChE) gene (gm, 1,836 bp) was cloned from the housefly and successfully expressed in the E. coli CodonPlus (DE3) RIL system (GM-E, 72 kDa) with a yield of 1,630 mU/g fresh cells. Using the gm, 10 kinds of mutants were constructed and expressed for enhancing sensitivity to insecticides. The sensitivity of these mutants to five kinds of organophosphate (OP) and three carbamate insecticides was investigated by measuring the apparent bimolecular inhibition constant ($k_i=k_2/K_d$). Surprisingly, the sensitivity of quadruple mutant IGFT was enhanced as much as 7-fold for acephate, 164-fold for demeton-S-methyl, 484-fold for dichlorvos, 523-fold for edifenphos, 30-fold for ethoprophos, 30-fold for benfuracarb, 404-fold for carbaryl, and 107-fold for furathiocarb, compared with that of GM-E, although the sensitivity of each single point mutant was slightly increased. These mutational studies indicated that (i) contradictory to Walsh et al. [39], the residue 327 is the important key residue for enhancing sensitivity as much as the residue 262, (ii) the residue 82 and additional residues of 234, 236, and 585 are also important, and (iii) sensitivity was cooperatively accelerated as the number of strategic mutations increased.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.735-742
• /
• 1996

Polymeric matrices were prepared with dextran and silver sulfadiazine by adding glycerine as a plasticiser. Namely, the release rate of the drug from the polymeric matrix formulations in dissolved phases was determined in a phosphate buffer solution. The results were as follows : The drug release time was delayed as drug loading contents increased, whereas it decreased as the glycerine concentration increased. The drug release time was not changed with varying the molecular weight of the dextran. The apparent release rate constant (k) increased as the composition of silver sulfadiazine and glycerine was increased. But the apparent release rate constant (k) was not changed with increasing molecular weight of the dextran.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.94-102
• /
• 1993

The effects of temperature and of $Na_2O$ and $SiO_2$ contents on the crystallization of zeolite A were studied, by examining crystallization curves and particle size distributions of final products at various crystallization conditions. Crystallization process could be simulated adopting the assumptions of constant linear growth rate and equilibrium between amorphous solid phase and soluble species. Rate constants were determined by comparing the simulated crystallization curves with experimental data. Rate constant for linear growth increased with temperature and crystallization rate at different mole ratio of $Na_2O/H_2O$ correlated reasonably well with increase of soluble species. The rate constant of crystallization did not increase with increase in mole ratio of $Na_2O/H_2O$, but the rate of nuclei formation and the fraction of soluble species were enhanced. The rate constants for linear growth of zeolite A were determined as $0.07{\sim}0.24{\mu}m{\cdot}min^{-1}$ at these experimental conditions Apparent activation energy was estimated as $49kJ{\cdot}mol^{-1}$.