• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.64-69
• /
• 2013

For power system protection, the distance relay settings are important. Apparent factor is a necessary parameter in distance relay settings. Apparent factors have to be calculated when setting the distance relays and doing the resetting in case of configuration change in power system. The problem is that the current method to calculate apparent factor requires tools and plenty of time to do fault analysis and this method is complex especially in case of configuration change. Therefore this paper proposes a fast algorithm to calculate apparent factor without the fault analysis. Test results prove that this algorithm is simple and accurate by simulation.

• 대한기계학회논문집B
• /
• 제23권3호
• /
• pp.352-363
• /
• 1999

Target detection by the infrared imager depends on the apparent temperature difference between the target and the background, so it is essential to predict apparent temperature variations for this purpose. In this study, thermal analysis program Including conduction, convection and radiation is developed and applied to a representative geometry adequate for examining the apparent temperature characteristics. The results show that the longwave emissivity in association with the background temperature affects the apparent temperature strongly but does not affect the physical temperature. It is revealed that the background temperature plays a role of tuning the apparent temperature. As the longwave emissivity decreases, the apparent temperature decreases when the target is hotter than the background, whereas it increases in the reversed situation. These findings imply that an effective surface treatment, such as painting of a less emissive material, may provide a less detection probability and contribute to preventing the target from being detected at night.

• 한국지반신소재학회논문집
• /
• 제19권4호
• /
• pp.33-40
• /
• 2020

최근 대규모 택지개발 현장에서 굴착공정 중 매립폐기물이 발견되는 사례가 빈번히 발생되고 있다. 발생된 매립폐기물을 환경적으로 처리하기 전에는 대상지역의 개발사업을 진행할 수 없으며, 매립폐기물에 대한 처리대책을 수립하여 환경적이고 경제적으로 처리하여야 한다. 본 연구에서는 매립폐기물의 처리에 있어 단가 산정의 기본적인 계수가 되는 매립폐기물의 겉보기밀도와 체적환산계수의 상관관계를 분석하고자 하였다. 이를 위하여 ◯◯지역의 사용종료 매립지 10지점에서 매립폐기물을 채취하여 물리적성상을 분석한 후, 성상별 및 혼합폐기물의 겉보기밀도를 측정하였다. 매립폐기물의 겉보기밀도와 체적 환산계수의 상관관계를 분석하기 위하여, 매립폐기물의 겉보기밀도로부터 유추한 체적환산계수와 실측한 체적환산계수, 경험식에 의한 체적환산계수를 비교하였다. 분석결과, 겉보기밀도로부터 유추한 체적환산계수, 경험식에 의한 체적환산계수, 그리고 실측한 체적환산계수는 일정한 상관관계를 나타내고 있어, 겉보기밀도와 체적환산계수에 관한 기초자료로서 활용할 수 있을 것으로 판단된다.

• 한국세라믹학회지
• /
• 제42권1호
• /
• pp.1-6
• /
• 2005

In aqueous alumina tape casting, the effects of altering the composition of the suspensions, the binders and the casting thickness were studied. The rheological behavior of the suspensions and the defects of the dried tapes were examined and the relationships between them are discussed. The changes in the defect regions reported in the previous paper were related with the rheological properties with variations of the binder, the composition and the casting thickness. The shear thinning factor increased with the organic content and the solid content (the decrease of water content). The apparent viscosity increased with the shear thinning factor. The relation between the shear thinning factor and the log apparent viscosity was similar for all binder types. In the relation between the defect free region and the rheological properties, the defect free region became narrower with increasing casting thickness. The defect free region is independent of binder type. Therefore, the thicker tape is more difficult to produce in aqueous alumina tape casting. Knowledge of the rheological properties of the suspensions could help Predict the defect type and the possibility of defect free dried tapes.

• 조명전기설비학회논문지
• /
• 제26권8호
• /
• pp.18-26
• /
• 2012

Recently, there have been suggestions that power factor should be considered to increase the efficiency of electric power supply when evaluating the performance of the electric appliances in standby mode and the related studies have been conducted to improve the efficiency standard of standby power. But, they lack the analysis of the standby power characteristics with the changes of power factor. This study is conducted to analyze the standby power characteristics of TV which is a typical home appliance and reaches a conclusion that the apparent power can be a more reasonable index which reflects the efficiency of electric power supply. It is also found that LED TVs show the best performance in standby mode. Moreover, an example to set standby power standards on TVs to be applied in the future is suggested, considering the energy efficiency policies for appliances.

• Bulletin of the Korean Chemical Society
• /
• 제16권12호
• /
• pp.1189-1193
• /
• 1995

The comparative molecular field analysis (CoMFA) method has been employed to correlate the apparent lipophilicity (logkw) and global lipophilicity (logP) for orthopramide derivatives. This study demonstrated that CoMFA is an excellent method in predicting the complex properties of molecules such as apparent lipophilicity (logkw) or lipophilicity (logP). The better predictability of lipophilicity by introducing logkw as an independent descriptor suggests that the HPLC capacity factor measured in a buffer of pH 7.5 (logkw) can be effectively utilized in the prediction of global lipophilicity.

• Composites Research
• /
• 제23권2호
• /
• pp.1-9
• /
• 2010

본 연구는 실린더 내부가 경사가능재료로 코팅된 두꺼운 벽을 가진 실린더의 겉보기 파괴인성치를 해석한 것이다. 실린더는 내부로부터 반경방향의 단일 모서리 균열이 내재되어 있으며, 균열면과 내면에는 내압을 받고 있는 것으로 가정하였다. 소결온도로부터 냉각 결과 균일한 열팽창계수로 인해 실린더에는 비적합 고유스트레인이 생성되었다. 기존의 연구에서 소개된 응력확대계수 평가법에 기초해 겉보기 파괴인성치를 계산하였다. 본 연구에서는 TiC/$Al_{2}O_{3}$ FGM 코팅된 실린더를 사용하였고 겉보기 파괴인성치의 수치적인 결과를 도식화하였다. 재료분포프로파일, 실린더 벽 두께, 적용온도와 코팅두께등이 겉보기 파괴인치에 미치는 영향이 상세히 조사되었으며, 이러한 모든 인자는 실린더의 겉보기 파괴인성치를 조절하는데 중요한 역할을 하는 것으로 밝혀졌다.

• 펄프종이기술
• /
• 제33권1호
• /
• pp.38-44
• /
• 2001

The effects of refining load on the paper properties were investigated. HwBKP, SwBKP and SwUKP were refined with PFI mill at the load of 3.33 N/mm and 6.00 N/mm. Higher Scott bond was obtained at the higher refining load for three pulp used in this study. However any changes in the light scattering coefficient with the change of refining load were not observed. Although the effect of refining load on the formation index for SwUKP was not observed, higher refining load gave the better formation for HwBKP and SwBKP. The fiber mass and fiber crowding factor were not affected by the refining load. Higher apparent density and tensile index were obtained with the higher refining load. However, the higher refining load did not improve the tensile index at the same apparent density. The tear index was decreased with the increase of refining load.

• Journal of Nutrition and Health
• /
• 제29권2호
• /
• pp.153-158
• /
• 1996

Polyethylene glycols(PEGs)are hydrophilic molecules that have been used to characterize intestinal permeability via the paracellular pathway. Using a mixture of PEGs(400, 600 and 1000), containing oligomers in the molecular weight range 330 to 1122 D, the molecular weight permeability dependence in the jejunum of the rat small intestine was examined, employing an in situ recirculation perfusion technique. Individual oligomers were determined by HPLC with refractive detection. In the range studied, a distinct molecular weight cut-off was not apparent. Corrected for the length of jejunum used in the study, over the molecular weight range 330 to 1122D, the apparent permeability(Papp) of PEG ranged from 4.92$\pm$0.02$\times$10-5cm/sec(mean$\pm$SEM, n=5) to 0.28$\times$10-5cm/sec. Also, it was observed that the apparent permeability was inversely proportional to approximately MW2. The results in this study suggest that molecular weight is an important factor in determining the intestinal permeability.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권3호
• /
• pp.62-67
• /
• 2003

The grinding force generated during the grinding process causes an elastic deformation of the workpiece, grinding wheel, and machine system. Thus, the true depth of cut is always smaller than the apparent depth of cut. This is known as machining elasticity phenomenon. The machining elasticity parameter is defined as a ratio between the true depth of cut and the apparent depth of cut. It is an important factor to understand the material removal mechanism of the grinding process. To increase productivity, the value of this machining elasticity parameter must be large. Therefore, it is essential to know the characteristics of this parameter. The objective of this research is to study the effect of the major grinding conditions, such as table speed, depth of cut, on this parameter experimentally, Through this research, it is found that this parameter value is increasing when the table speed is decreasing or the depth of cut is increasing. Also, this parameter value depends on the grinding mode (up grinding, down grinding).