Temperature dependency of resistivity of the carbon black-polyethylene composites below and above percolation threshold is studied based on the electrical conduction mechanism. Temperature coefficient of resistance of the composites below percolation threshold changed from minus to plus, increasing volume fraction of carbon black; this trend decreased with increasing volume fraction of carbon black. The temperature dependence of resistivity of the composites below percolation threshold can be explained with a tunneling conduction model by incorporating the effect of thermal expansion of the composites into a tunneling gap. Temperature coefficient of resistance of the composites above percolation threshold was positive and its absolute value increased with increasing volume fraction of carbon black. By assuming that the electrical conduction through percolating paths is a thermally activated process and by incorporating the effect of thermal expansion into the volume fraction of carbon black, the temperature dependency of the resistivity above percolation threshold has been well explained without violating the universal law of conductivity. The apparent activation energy is estimated to be 0.14 eV.
The effects of several variables on the refolding of hen egg white lysozyme have been studied, Lysozyme was denatured in both urea, and guanidine hydrochloride(GuHCl), and batch refolded by dilution (100 to 1000 fold) into 0.1 M Tris-HCI, pH 8.2 mM EDTA 3 mM reduced glutathione and 0.3 mM oxidised glutathions. Refolding was found to be sensitive to temperature, with the highest refolding yield obtained at 50$\^{C}$. The apparent activation energy for lysozyme re-folding wasf ound to be 56kJ/mol, Refolding by dilution results in low concentrations of both de-naturant and reducing agent species. It was found that the residual concentrations obtained dur-ing dilution(100-fold dilution:[GuHCI]=0.06 mM, [DTT]=0.15 mM) were significant and could inhibit lysozyme refolding. This study has also shown that the initial protein concentration (1-10mg/mL) that is refolded is an important parameter. In the presence of residual GuHCl and DTT higher refolding yields were obtained when starting from higher initial lysozyme concentra-tions. This trend was reversed when residual denaturant components were removed from the re-folding buffer.
In the current research, thermal and catalytic thermogravimetric (TG) analysis of polyethylene terephthalate (PET) over natural zeolite (NZ), olivine, bentonite, HZSM-5, and HAl-MCM-41 were investigated using a TG analyzer and model-free kinetic analysis. Catalytic TG analysis of PET was carried out at multi-heating rates, 10, 20, 30, and 40 ℃/min, under nitrogen atmosphere. Apparent activation energy (Ea) values for the thermal and catalytic pyrolysis of PET were calculated using Flynn-Wall-Ozawa method. Although natural catalysts, NZ, olivine, and bentonite, could not lead the higher PET decomposition efficiency than synthetic zeolites, HZSM-5 and HAl-MCM-41, maximum decomposition temperatures on the differential TG (DTG) curves for the catalytic pyrolysis of PET, 436 ℃ over olivine, 435 ℃ over bentonite, and 434 ℃ over NZ, at 10 ℃/min, were definitely lower than non-catalytic pyrolysis. Calculated Ea values for the catalytic pyrolysis of PET over natural catalysts, 177 kJ/mol over olivine, 168 kJ/mol over bentonite, and 171 kJ/mol over NZ, were also not lower than those over synthetic zeolites, however, those were also much lower than the thermal decomposition, suggesting their feasibility as the proper and cost-effective catalysts on the pyrolysis of PET.
질화상압동시소결(NPS) 공정에 의해 제조된 기공율이 다른 질화규소 소결체에 대해 $1300^{circ}C$ 순산소 가스분위기에서 산화거동을 조사하였다. 질화규소 세라믹스 표면에 형성된 산화층의 두께는 산화 시간과 온도에 따라 증가되었으며, $1300^{circ}C$에서 100시간 산화시킨 5A5Y5Si와 5A5Y10Si 시편의 산화층 두께는 각각 10$\mu$m와 20$\mu$m이었다. 5A5YSi와 5A5Y10Si 시편의 산화는 각각 215kJ/mol과 104kJ/mol의 활성화 에너지를 갖고 포물선적 거동을 나타내었다. $1300^{circ}C$에서 500시간 산화시킨 후, 5A5Y5Si 시편에 대해 꺾임 강도를 측정한 결과, 초기의 약 500MPa값을 유지하고 있었으며, 반면 5A5Y10Si의 경우에는 초기의 값에서 약 100MPa의 강도저하를 나타내고 있었다.
To control the hydrolysis rate of PET fabric with NaOH, HCl and $CH_3$COOH(HAc), as regulating reagent, were added to the 0.5 M NaOH solution. The concentrations of acids in 0.5 M NaOH were varied. PET fabrics were treated with aqueous solutions of acids in 0.5 M NaOH under different conditions. The weight loss of PET fabric, the rate of hydrolysis, the apparent activation energy (E$_{\alpha}$), the handle value, the etched surface of treated PET fabric, and the effect of salts such as NaCl, $CH_3$COONa(NaAc), and NH$_4$Cl on the weight loss were discussed. Acids in the aqueous 0.5 M NaOH solution decreased the weight loss of PET fabric bacause of neutralization of OH- and the weight loss of PET fabrics treated with corresponding concentration of aqueous NaOH solution to the concentrations of the aqueous solutions of acids in 0.5 M NaOH was lower than that of PET fabrics treated with aqueous solutions of acids in 0.5 M NaOH. The addition of NaCl to aqueous NaOH solution accelerated the reaction of OH- with PET greatly, the addition of NaAc increased the weight loss slightly, but the addition of NH$_4$Cl decreased the weight loss. It was thought that the very remarkable result that NaCl in aqueous NaOH solution promoted the hydrolysis of PET with NaOH would contribute to the conservation of energy and NaOH in the weight loss finishing process of PET fabric. The etched surface and the handle value of treated PET fabric were independent of the difference in the kinds of acids and salts added.nd salts added.
볏짚 톱밥과 같은 바이오매스는 석탄과 함께 사용할 수 있는 잠재력이 큰 에너지원으로 이들을 가스화공정에 적용하면 수송용 연료같은 bio-oil을 생산할 수 있다. 본 연구에서는 상압의 열천칭 반응기(thermobalance)에서 톱밥, 볏짚, 갈탄, 역청탄, 무연탄의 수증기 가스화 반응특성을 수행하였으며, 가스화 온도 $600{\sim}850^{\circ}C$, 수증기 분압 30~90 kPa의 범위에서 조업변수들이 가스화반응속도에 미치는 영향을 조사하였다. 세 가지의 기체-고체 화학반응모델이 가스화반응의 거동을 예측하는 능력을 비교하였으며, modified volumetric reaction model을 사용하여 공정설계에 필수적인 kinetic 정보를 도출하였다. 두 가지 바이오매스와 세 가지 석탄 촤의 가스화반응성을 비교하였다. Arrhenius plot으로부터 얻어진 바이오매스와 석탄의 활성화에너지는 모두 문헌상의 범위에 속하였다. 각 연료에 대하여 수증기분압에 대한 반응차수를 결정하였으며, 가스화공정 설계의 기초데이타로서 겉보기 반응속도식을 제시하였다.
The apparent activation energy Qc, the applied stress exponent n, and rupture life have been determined from creep test results of AZ31 Mg alloy over the temperature range of 200$^{\circ}C$ to 300$^{\circ}C$ and the stress range of 23.42 MPa to 93.59 MPa, respectively, in order to investigate the creep behavior. Constant load creep tests were carried out in the equipment including automatic temperature controller with data acquisition computer. At the temperature of $200^{\circ}C{\sim}220^{\circ}C$ and under the stress level of 62.43~93.59 MPa, and at around the temperature of $280^{\circ}C{\sim}300^{\circ}C$ and under the stress level of 23.42~39.00 MPa, the creep behavior obeyed a simple power-law relating steady state creep rate to applied stress and the activation energy fur the creep deformation was nearly equal to that of the self diffusion of Mg alloy including aluminum From the above results, at the temperature of $200^{\circ}C{\sim}220^{\circ}C$ the creep deformation for AZ31 Mg alloy seemed to be controlled by dislocation climb but controlled by dislocation glide at $280^{\circ}C{\sim}300^{\circ}C$ .And relationship beween rupture time and stress at around the temperature of $200^{\circ}C{\sim}220^{\circ}C$ and under the stress level of 62.43~93.59 MPa, and again at around the temperature of $280^{\circ}C{\sim}300^{\circ}C$ and under the stress level of 23.42~39.00 MPa, respectively, appeard as fullow; log$\sigma$=-0.18(T+460)(logtr+21)+5.92, log$\sigma$ = -0.25(T+460)(logtr+21)+8.02 Also relationship beween rupture time and steady state creep rate appears as follow; ln$\dot$ =-0.881ntr-2.45
연구목적: 생활의 편의를 위한 고흡수성 중합물질의 생산 및 저장 사업장에서 발화사고가 발생하고 있어 이에 대한 실질적인 예방대책 수립을 위한 기초자료의 확보를 위해 실험적인 연구를 하였다. 연구방법: 시료용기(가로 20cm×세로 20cm) 폭을 각각 3cm, 5cm, 7cm, 14cm의 크기로 입방체 형상으로 하여 무한평판에 접근하도록 하였고, 300mesh의 스테인리스 망으로 전면과 뒷면을 일차원 방향으로 열이 전달되게 하였다. 이 시료용기를 온도제어장치 프로그램을 미리 설정하여 소정의 온도로 가열되도록 한항온조 중심에 위치시키고 중심온도가 설정온도보다 20℃이상 상승하였을 때를 「발화」로, 시료의 중심온도가 설정온도의 근사치에 유지되었을 경우를 「비발화」로 판정하였다. 연구결과: 자연발화한계온도는 시료용기 폭이 3cm일 경우 217.5℃, 5cm일 경우 212.5℃, 7cm일 경우 202.5℃, 그리고 14cm일 경우에는 187.5℃로 산출되었다. 최고온도에 도달하는 발화유도시간은 3cm일 경우 약 34시간, 5cm일 경우 약 76시간, 7cm일 경우 약 143시간, 그리고 14cm일 경우 약 318시간으로 나타났다. 결론: ① 용기의 크기가 증가할수록 자연발화온도는 낮아지고, 최고온도에 도달되는 발화유도시간은 길어지는 것으로 나타났다. ② 겉보기활성화에너지는 44.92 [kcal/mol]을 구하였으며, 상관도는 96.93%이었다.
배 가공시 그 이용성을 증진시키기 위하여 혼탁 및 청징주스 농축액의 리올로지 특성을 조사, 비교한 결과는 다음과 같다. 각각의 농축액들은 뉴톤유체에 가까운 흐름특성을 나타내었으며, Power law model과 Herschel-Bulkley model에 적용되었다. 유동지수는 농도에 대해서는 뚜렷한 상관관계를 보이지 않았으나 측정온도에 대해서는 온도가 증가할수록 감소하여 의사가소성을 띠었으며, 점조도지수는 농도가 증가할수록, 온도가 감소할수록 증가하였으며, 항복력은 무시할 수 있는 정도였다. Arrhenius식에 의해 구한 전단속도 1500 1/s에 대한 점도의 유동활성화에너지는 농도가 $15^{\circ}Brix$에서 $60^{\circ}Brix$로 증가함에 따라 혼탁주스 농축액의 경우 $1.5104{\times}10^4$에서 $3.4141{\times}10^4\;J/kg{\cdot}mol$로, 청징주스 농축액의 경우 $1.4762{\times}10^4$에서 $3.4963{\times}10^4\;J/kg{\cdot}mol$로 증가하였으며, 지수함수식에 의해 구한 농도의존성 상수인 A는 온도가 $5^{\circ}C$에서 $60^{\circ}C$로 증가함에 따라 혼탁주스 농축액의 경우 0.0789에서 $0.0484^{\circ}Brix^{-1}$로, 청징주스 농축액의 경우 0.0786에서 $0.0476^{\circ}Brix^{-1}$로 감소하였다. 이와같이 혼탁주스 농축액과 청징주스 농축액은 리올로지 특성에 있어 거의 차이가 없었다.
가자미 식해에서 분리한 Leuconostoc mesenteroides(Sikhae)로부터 생산한 dextransucrase 조효소액에 10 sucrose를 반응시켜 얻은 dextran 생성액의 유변성과 생성된 dextran의 분자량 분포 및 수율을 반응시간별로 조사하였다. Dextran 생성속도는 반응액의 HPLC를 이용한 당분석과 점도측정으로 추정이 가능하였다. Periodate oxidation 시험결과 정제된 dextran은 89의 Alpha-(1-6) 결합외에 11의 Alpha-(1-3) 부결합이 존재하는 것으로 판단되며, 반응시간이 경과함에 따라 dextran 생성액은 높은 항복력을 갖는 Bingham-pseudoplastic 유체특성을 나타내었다. 반응시간이 결과함에 따라 시간의존 특성(thixothropicity)이 증가하였는데 이러한 현상은 GPC 분석을 통하여 dextran 생성액내 고분자 dextran의 비율증가에 의한 것임을 알 수 있었다. Dextran 생성액은 반응 8시간후에 최고점도 (2680 cP. $\gamma$=$33.75s^{-1}$, $25^{\circ}C$)를 나타내었으며, 그 이후부터 점도는 다시 감소하였다. 또한 dextran 생성액은 온도가 증가함에 따라 점도가 감소하였으며, 이는 Arrhenius의 일반식으로 표시할 수 있었다. Arrhenius 식으로 구한 dextran 생성액의 유동 활성화에너지는 반응시간이 경과함에 따라 증가하였으며, 8시간 반응시킨 dextran 생성액의 경우 1.69kcal/gmole 정도로써 온도증가에 의한 점도변화가 비교적 적음알 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.