• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.3
• /
• pp.141-147
• /
• 2019

In this paper, a beam pattern performance analysis was performed according to number of array elements and spacing of the phase array antenna. The distance between array elements in an array structure design was reduced due to the electrical length of Ka-band, which increases the number of array elements in applying the aperture. If the number of elements reduce by widening the array distance, the grating lobes of the same size as the main beam will occur in visible region. If the number of array elements should be applied to a system where the number of array elements should be minimized, the analysis was performed on a plan to reduce the number of array elements and minimize degradation of performance, such as beam width and side lobe level.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2135-2146
• /
• 2022

A nuclear energy facility is one of the most critical facilities to be safely protected during and after operation because the physical destruction of its barriers by an external attack could release radioactivity into the environment and can cause harmful effects. The barrier walls of nuclear energy facilities should be sufficiently robust to protect essential facilities from external attack or sabotage. Physical protection system (PPS) vulnerability assessment of a typical small nuclear research reactor was carried out by simulating an external attack with a tri-nitro toluene (TNT) shaped charge and results are presented. The reinforced concrete (RC) barrier wall of the research reactor located at a distance of 50 m from a TNT-shaped charge was the target of external attack. For the purpose of the impact assessment of the RC barrier wall, a finite element method (FEM) is utilized to simulate the destruction condition. The study results showed that a hole-size of diameter 342 mm at the front side and 364 mm at the back side was created on the RC barrier wall as a result of a 143.35 kg TNT-shaped charge. This aperture would be large enough to let at least one person can pass through at a time. For the purpose of the PPS vulnerability assessment, an Estimate of Adversary Sequence Interruption (EASI) model was used, which enabled the determination of most vulnerable path to the target with a probability of interruption equal to 0.43. The study showed that the RC barrier wall is vulnerable to a TNT-shaped charge impact, which could in turn reduce the effectiveness of the PPS.

• Journal of the Korean Society of Radiology
• /
• v.83 no.3
• /
• pp.724-729
• /
• 2022

A duodenal web is an incomplete diaphragm of the duodenal lumen that causes a partial or (intermittent) complete obstruction. The size of a duodenal web's aperture determines the degree of obstruction, age at presentation, and radiologic findings. We report a case of duodenal web incidentally diagnosed in a 14-month-old boy who presented to the hospital after ingesting a foreign body. We provide a comprehensive report of multiple studies through abdominal radiograph, upper gastrointestinal study, endoscopy, and surgical findings. We emphasize that the duodenum should be considered as the location of the obstruction when infants exhibit delayed discharge or dynamic positioning of a foreign body in a radiologic examination.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.6
• /
• pp.445-455
• /
• 2005

Purpose: We developed an animal SPECT system using clinical Philips ARGUS scintillation camera and pinhole collimator with specially manufactured small apertures. In this study, we evaluated the physical characteristics of this system and biological feasibility for animal experiments. Materials and Methods: Rotating station for small animals using a step motor and operating software were developed. Pinhole inserts with small apertures (diameter of 0.5, 1.0, and 2.0 mm) were manufactured and physical parameters including planar spatial resolution and sensitivity and reconstructed resolution were measured for some apertures. In order to measure the size of the usable field of view according to the distance from the focal point, manufactured multiple line sources separated with the same distance were scanned and numbers of lines within the field of view were counted. Using a Tc-99m line source with 0.5 mm diameter and 12 mm length placed in the exact center of field of view, planar spatial resolution according to the distance was measured. Calibration factor to obtain FWHM values in 'mm' unit was calculated from the planar image of two separated line sources. Te-99m point source with i mm diameter was used for the measurement of system sensitivity. In addition, SPECT data of micro phantom with cold and hot line inserts and rat brain after intravenous injection of [I-123]FP-CIT were acquired and reconstructed using filtered back protection reconstruction algorithm for pinhole collimator. Results: Size of usable field of view was proportional to the distance from the focal point and their relationship could be fitted into a linear equation (y=1.4x+0.5, x: distance). System sensitivity and planar spatial resolution at 3 cm measured using 1.0 mm aperture was 71 cps/MBq and 1.24 mm, respectively. In the SPECT image of rat brain with [I-123]FP-CIT acquired using 1.0 mm aperture, the distribution of dopamine transporter in the striatum was well identified in each hemisphere. Conclusion: We verified that this new animal SPECT system with the Phlilps ARGUS scanner and small apertures had sufficient performance for small animal imaging.

• Korean Journal of Plant Taxonomy
• /
• v.32 no.3
• /
• pp.339-362
• /
• 2002

Pollen morphology of 13 species of Korean Euphorbia was re-examined by means of LM and SEM. Taxonomic evaluation of palynological characters and relationships among taxa were also discussed based on the analysis of polar length, equatorial diameter, aperture size and exine thickness. Korean Euphorbia species were classified into three groups based on the mean size of polar length (P) and equatorial diameter (E) as follows:Group 1. sect. Tulocarpa and Tithymalus of subgenus Esula; $(P){\times}(E)=(54.88-67.17{\mu}m){\times}(44.30-64.75{\mu}m)$, Group 2. sect. Esula and Helioscpiae of subgenus Esula; $(P){\times}(E)=(39.98-47.24{\mu}m){\times}(36.07-38.83{\mu}m)$, Group 3. sect. Chamaesyce and Hypericifoliae of subgenus Chamaesyce; $(P){\times}(E)=(30.32-32.51{\mu}m){\times}(21.71-26.23{\mu}m)$. Various features of surface sculpturing were also grouped into 8 types by the characteristics of perporation size and distance of perporations as well as connection state of it. Pollen size and surface sculpturing were comparatively available in the levels of subgenus and section. Especially subgenus Chamaesyce was distinctly different from subgenus Esula by having compactly distributed perporations on exine surface as well as its small size of pollen grains. Because of the great variations in pollen size and the occurrence of various types of surface sculpturing according to the local poulations of each species, it was evaluated that they were unsuitable in classifying each species of Euphorbia. But such cases, that is, E. hylonoma being more familiar with E. ebracteolata than E. Pallasii, and E. pekinensis and E. fauriei as well as E. pallasii being strongly related with each other based on the similarity of surface sculpturing, reflected its usefulness in the classification of some Euphorbia species.

• Journal of KIISE:Software and Applications
• /
• v.33 no.4
• /
• pp.402-410
• /
• 2006

This paper presents a method for feature based block motion estimation that uses multi -resolution image sequences to obtain the panoramic images in the continuous ultrasound image sequences. In the conventional block motion estimation method, the centers of motion estimation blocks are set at the predetermined and equally spaced locations. This requires the large blocks to include at least one feature, which inevitably requires long estimation time. In this paper, we propose an adaptive method which locates the center of the motion estimation blocks at the feature points. This make it possible to reduce the block size while keeping the motion estimation accuracy The Harris-Stephen corner detector is used to get the feature points. The comer points tend to group together, which cause the error in the global motion estimation. In order to distribute the feature points as evenly as Possible, the image is firstly divided into regular subregions, and a strongest corner point is selected as a feature in each subregion. The ultrasound Images contain speckle patterns and noise. In order to reduce the noise artifact and reduce the computational time, the proposed method use the multi-resolution image sequences. The first algorithm estimates the motion in the smoothed low resolution image, and the estimated motion is prolongated to the next higher resolution image. By this way the size of search region can be reduced in the higher resolution image. Experiments were performed on three types of ultrasound image sequences. These were shown that the proposed method reduces both the computational time (from 77ms to 44ms) and the displaced frame difference (from 66.02 to 58.08).

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.2
• /
• pp.155-160
• /
• 2000

In order to understand the effects of sex or age on cellular characteristics of adipocytes from Hanwoo and sheep, samples were obtained from omental, subcutaneous, intermuscular and intramuscular adipose tissue depots of bulls, steers, heifers and cows in Hanwoo, and perirenal, omental and subcutaneous adipose tissues of fetal lambs, suckling lambs and wethers in sheep. In case of Hanwoo, mean diameter, surface area and volume of adipocytes from each depot were obtained by multisizer II (Coulter Co., UK). Osmium-fixed adipocytes were sized and counted using $560{\mu}m$ aperture. For samples obtained from sheep, cellularity was measured by using microscope and MCV program of Texas Instrument. Bulls had less subcutaneous and kidney fat than steers even though their slaughter and carcass weight were heavier. The amounts of fat from cows were greater in subcutaneous, kidney and internal organs than heifers. Steers had larger adipocytes in subcutaneous, intermuscular and intramuscular adipose tissues than bulls, although the differences were significant only for the subcutaneous adipose tissue depots. Adipocytes appeared to be largest in omental and smallest in intramuscular adipose tissue, although there were no significant differences among tissues. In a comparison of heifers and cows, significant site effects (p<0.05) were shown in adipocyte diameter, surface area and volume, and adipocyte appeared to be largest in omental tissue. Statistical difference (p<0.05) was only shown in cell volume of intramuscular tissue which was higher in cow than heifer. Intramuscular adipose tissue tended to have relatively greater numbers of cells per gram tissue and reflect lesser maturity of intramuscular adipose tissue relative to other adipose tissues. In sheep, regardless of adipose tissue depots, wethers had the greater adipocyte diameters than those at any other growth stage of sheep. Within adipose depots, the ranking of cell size was the greatest in the omental tissue of wether and the lowest in the renal and subcutaneous adipose tissue depots of fetal lamb. The cell size of adipocyte became larger with age, especially from fetal to suckling lamb due to a rapid hypertrophy of both perirenal and subcutaneous adipocytes during the suckling period.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.307-314
• /
• 1984

One hundred winter wheat cultivars obtained from the world collections in Korea were planted in 1982. Stomatal frequency of flag leaf of these cultivars were measured, and among these 21 cultivars which showed different stomatal frequency were selected to investigate the relationship of their stomatal frequencies and other characters such as culm length, heading date and characters related to leaf. Stomatal frequency of flag leaf of 100 cultivars different significantly, ranging from 51 to 90 stomata mm$^{-2}$ for the adaxial and 35 to 65 for the abaxial surfaces of leaf. Stomatal frequency was always greater on the adaxial than on the abaxial surface. Mean ratios (adaxial/abaxial) were 1.5 for the flag leaf and 1.3 for the from second to fouth leaves. Among 21 cultivars examined, stomatal size which measured guard cell length varied from 38.5 to 46.6$\mu$ for adaxial surface and from 39.4 to 49.4$\mu$ for abaxial. A negative correlation was obtained between stomatal frequency and its size. Stomatal frequency decreased from flag (L$_1$) to lower leaves, progresively. Stomatal frequency on L$_1$ sheath was compared to those on L$_3$ and L$_4$ abaxial surface of leaf. More stomatal frequency on top and center of adaxial surface showed than that on basal part of a leaf but the abaxial surface resulted in reverse of adaxial one. Cultivars with high stomatal frequency on flag leaf showed higher stomatal frequency on the other leaves and sheaths. Positive correlation between stomatal frequency and other characters such as, culm length, heading date and chlorophyll content showed statistical significance, whearas it revealed the negative correlation of stomatal frequency with leaf weight, leaf area and stomatal aperture. However, no relation appeared between stomatal frequency and leaf vein.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.4
• /
• pp.431-439
• /
• 2010

Cross-interferometic synthetic aperture radar (CInSAR) technique from ERS-2 and Envisat images is capable of generating submeter-accuracy digital elevation model (DEM). However, it is very difficult to produce high-quality CInSAR-derived DEM due to the difference in the azimuth and range pixel size between ERS-2 and Envisat images as well as the small height ambiguity of CInSAR interferogram. In this study, we have proposed an efficient method to overcome the problems, produced a high-quality DEM over northern Alaska, and compared the CInSAR-derived DEM with the national elevation dataset (NED) DEM from U.S. Geological Survey. In the proposed method, azimuth common band filtering is applied in the radar raw data processing to mitigate the mis-registation due to the difference in the azimuth and range pixel size, and differential SAR interferogram (DInSAR) is used for reducing the unwrapping error occurred by the high fringe rate of CInSAR interferogram. Using the CInSAR DEM, we have identified and corrected man-made artifacts in the NED DEM. The wave number analysis further confirms that the CInSAR DEM has valid Signal in the high frequency of more than 0.08 radians/m (about 40m) while the NED DEM does not. Our results indicate that the CInSAR DEM is superior to the NED DEM in terms of both height precision and ground resolution.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.1
• /
• pp.62-65
• /
• 2010

This study was carried out to estimate the size and exine pattern of pollen grains in seven species of the genus Lilium by using scanning electron microscope. Exine of pollen grains, which were all monad, took the prolate forms with a pollen aperture. However, there were various L/W ratio between length (L) and width (W) of pollen grains among selected Lilium species. The pollen of L. distichum was oblong shape which had the highest L/W ratio of 2.59. On the other hand, that of L. concolor var. partheneion was broadly elliptical shape close to circle which had the lowest L/W ratio of 1.82. The surface patterns of exine were reticulate in all Lilium species that have showed diverse forms in their lumina. Pollen length and width in L. lancifolium had the greatest value, 115.90 and $46.54{\mu}m$, respectively, in comparison with those of L. tsingtauense, 70.33 and $38.72{\mu}m$, respectively. Except L. distichum and L. leichtlinii var. maximowiczii which had a similar pollen length within standard errors, the others in Lilium species showed different sizes, respectively. Therefore, these results indicated that pollen length could be a better standard for the classification of Lilium species than exine surface patterns or pollen dissection area.