• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.160-165
• /
• 2006

We have designed a high-transmission nano aperture in a perfect electric conductor film with the incident beam of 532 nm wavelength. The aperture basically has a C-shape and is known to produce a bright spot nearby the aperture in small size less than diffraction limit. The bright spot is strongly coupled with the local plasmon excited through the aperture hole. The characteristics of transmission and peak power of the aperture output were calculated using finite differential time domain (FDTD) technique, and the geometry of the aperture was determined to get a maximum transmission and peak power. To find the effect of the surface plasmon induced near by the aperture, we calculated the variations of the transmittance and the beam sizes by changing the size of the input beam irradiated on the aperture.

• 대한전자공학회논문지TC
• /
• 제41권8호
• /
• pp.99-103
• /
• 2004

본 논문에서는 Hairpin 발진기의 위상잡음을 개선시키기 위하여 접지 면에 Aperture를 구현하였다 Aperture를 마이크로스 트립 Hairpin 공진기에 적용함으로써 결합계수의 증가로 인해 마이크로스트립라인이 가지고 있는 Q값을 증가시켰다. 기존의 마이크로스트립 Hairpin 발진기와 비교하였을 때 Aperture를 적용한 발진기가 위상잡음을 100KHz offset에서 약 19dBc 개선시켰다. 제작된 발진기는 5.83GHz 대역이고, 출력전력은 -4.33dBm을 획득하였다.

• 자원환경지질
• /
• 제33권4호
• /
• pp.309-320
• /
• 2000

Aperture is an important parameter for determining the hydraulic characteristics of fractured media. In this study the topography of artificial rock joint surface was measured using 3D laser profilometer to analyze the aperture distribution. The initial aperture distribution was determined when the contact area became one percent of total joint surface. The initial aperture distribution of granite joint, with the mean value of 0.78 mm and the standard deviation of 0.34 mm was much different from that of the marble joint, with the mean value of 0.57 mm and the standard deviation of 0.26 mm. Apertures of both granite and marble showed normal distributions. Aperture distribution with the contact area of 25% was also analyzed. Mean value was decreased to one third compared to the initial aperture, but the standard deviation was decreased slightly. To determine the spatial correlation of the aperture distribution variogram analysis was carried out on the initial aperture data. Most experimental variograms were fitted well with exponential model. It is expected that the measured aperture characteristics can be used for stochastic analysis of fluid flow through rock joints.

• 전자공학회논문지
• /
• 제52권1호
• /
• pp.48-58
• /
• 2015

MMIC와 집적이 가능한 큰 유전상수를 가지는 급전 기판을 사용하는 개구면 결합 마이크로스트립 패치 안테나(ACMPA)의 개구면 폭을 변화시켜 ACMPA의 대역폭을 확장하는 방법에 대하여 연구하였다. 개구면의 폭이 증가할수록 ACMPA의 패치공진과 개구면 공진 사이의 상호 공진 영역이 증가하여 대역폭이 증가하였다. 일반적인 개구면의 길이와 폭의 비(10:1)을 가지는 ACMPA의 대역폭 20.8 %를 개구면 폭 변화를 이용하여 최대 35.3 %까지 확장하였다. 개구면 폭 증가에 의한 방사특성 저하는 매우 작았다.

• 한국전자파학회논문지
• /
• 제15권5호
• /
• pp.437-443
• /
• 2004

본 논문에서는 hairpin 발진기의 위상잡음을 개선시키기 위하여 접지면에 aperture를 구현하였다. Aperture를 마이크로스트립 hairpin 공진기에 적용함으로써 결합계수의 증가로 인해 마이크로스트립라인이 가지고 있는 Q값을 증가시켰다. 기존의 마이크로스트립 hairpin 발기와 비교하였을 때 aperture를 적용한 발진기가 위상잡음을 100 KHz offset에서 약 19 ㏈c 개선시켰다. 출력단에 PBG 구조를 연결함으로써 하모닉 특성이 우수한 발진기를 제작하였다. 5.8 ㎓ 대역이고, 출력전력은 0.67 ㏈m을 2차 하모닉과 -53.67 ㏈c의 특성을 획득하였다.

• 반도체디스플레이기술학회지
• /
• 제10권1호
• /
• pp.91-94
• /
• 2011

This paper presents light transmission efficiency by optical adhesive thickness between MLA and aperture layer and by aperture hole size. The gap between MLA and Aperture layer is adjusted by the shim. The more optical adhesive thickness increases, the better light transmission efficiency increases up to a point. After that, the light transmission efficiency decreases because stray lights cannot transmit through the aperture layer owing to cut-off by aperture layer. And as a result of light transmission efficiency with changing aperture hole size, the light transmission efficiency is proportional to area of aperture hole. The more specified process is made, the better data and sample will be got.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.38-39
• /
• 2005

A new C-aperture is needed in the Ag film because general metal films don't alternate with the PEC film. In this paper, using FDTD method and the Drude-Lorentz metal model, a new C-aperture is designed in the Ag film and the 40nm-beam size and the $7\%$ near-field transmission efficiency are obtained at 28nm distance from the aperture. Its near-field transmission is about 1000 times larger than that of a 54 nm${\times}$54 nm square aperture.

• Journal of electromagnetic engineering and science
• /
• 제5권3호
• /
• pp.105-111
• /
• 2005

This paper presents the basic characteristics of a cutoff cavity-backed aperture antenna with a feed post and a parasitic post inserted parallel to the aperture. It is shown that this type of antenna forcibly resonates the cutoff cavity by adding a single external reactance to the parasitic post. The Galerkin's method of moments is used to analyze integral equations for the unknown electric current on each post and the aperture electric field on the aperture. The value of an external reactance for forced resonance is analytically obtained by deriving a determining equation. Also the current distribution on each post, aperture electric field distributions, and the radiation patterns are discussed. The theoretical analysis is verified by the measured return loss and radiation patterns.

• 대한전자공학회논문지TC
• /
• 제41권1호
• /
• pp.69-72
• /
• 2004

접지면에 PBG와 Aperture를 설치함으로써 고성능 대역통과 여파기를 설계하였다. 대역통과 여파기의 하모닉 특성은 PBG 구조에 의하여 개선되었고 대역폭은 Aperture에 의하여 확대되었다. 세가지 크기를 갖는 PBG 구조가 결합되어 새로운 PBG 구조가 도출되었다. 설계 중심 주파수는 2.2 GHz이었고 대역폭은 Aperture에 의하여 $40\%$ 확대되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.711-714
• /
• 2004

A new design for improving the aperture ratio of bottom emission type AMOLED is investigated. In conventional, the TFT of AMOLED fabrication method is "Etch Stopper (7-mask)", so the aperture ratio is limited in 28${\sim}$33% by Cs(Storage Capacitor). A high aperture ratio TFT is designed by using BCE(Back Channel Etching 5-mask) fabrication way and the aperture ratio is up to 40% shown in 2.2"AMOLED display.