• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.722-729
• /
• 2010

In this study, we considered the development for degree of compaction for intelligent compaction. In practice, any direct or indirect method can be used as a intelligent compaction method. A series of field tests was conducted using an accelerometer. This is quick and simple indirect methods of measuring soil stiffness. Each result was compared with the results from a plate load test. A prototype device for intelligent compaction was developed, and we evaluated its performance.

• Archives of Craniofacial Surgery
• /
• v.21 no.4
• /
• pp.261-263
• /
• 2020

Osteomas are benign osteogenic neoplasms that usually occur as solitary craniofacial lesions. Multiple osteomas are rare, particularly those that do not occur as part of an associated syndrome. We report a case of a 72-year-old woman who presented with multiple bony protrusions over the forehead and scalp. She denied any diagnosis of syndromes that are known to be associated with osteomas. Surgical excision was performed by endoscopically resecting more than 30 osteomas of the frontal and bilateral parietal bones. Compared with conventional surgical excision through a direct incision, endoscopic-assisted surgery is a simple and effective method for the treatment of multiple craniofacial osteomas and is associated with excellent cosmetic outcomes and no neurovascular complications.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.130-135
• /
• 2007

In this paper, a direct model reference adaptive fuzzy control (MRAFC) scheme is developed for the plant model whose structure is represented by the MIMO Takagi-Sugeno fuzzy model. The MRAFC scheme is proposed to provide asymptotic tracking of a reference signal lot the systems with uncertain or slowly time-varying parameters. The developed control law and adaptive law guarantee that all signals in the closed-loop system are bounded. In addition, the plant state tracks the state of the reference model asymptotically with time tot any bounded reference input signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.390-394
• /
• 2003

It is very important to simulate various mobile communication channels for the reliable system design and performance tests. Therefore, a new method is proposed in this paper to improve the conventional one for the purpose of the efficient channel simulation having various characteristics. A newly proposed method can simulate any narrow band channel very efficiently from the given Doppler power spectrum model. Also, it has many simulation advantages considering the variety of wireless channel conditions since parameters related with channel characteristics, such as a signal power, signal to noise ratio, direct signal power ratio, etc., can be easily changed according to various propagation environments to be tested.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.304-306
• /
• 1993

In this paper, the authors show a link between a heuristic controller used in industry and a theoretical generalized controller. First, we clarify the internal structure of the generalized two-degree-of-freedom controller which yields a link between the theoretical researches and the practical applications. Secondly, we indicate how to blend identification and control together without any modification of the controller. This is in fact the problem of closed-loop identification. Thirdly, we propose a design technique of a free parameter taking into account a robust stability based on the information obtained from the identification. Finally, we apply the proposed algorithm to trajectory control of DD robot.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.473-476
• /
• 2003

We suggest 2 dimensional Fast Fourier Transform using Polynomial Transform and integer Fast Fourier Transform. Unlike conventional 2D-FFT using the direct quantization of twiddle factor, the suggested 2D-FFT adopts implemented by the lifting so that the suggested 2D-FFT is power adaptable and reversible. Since the suggested FFT performg integer-to-integer mapping, the transform can be implemented by only bit shifts and auditions without multiplications. In addition. polynomial transform severely reduces the multiplications of 2D-FFT. While preserving the reversibility, complexity of this algorithm is shown to be much lower than that of any other algorithms in terms of the numbers of additions and shifts.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.10 no.2
• /
• pp.1-7
• /
• 2011

An experimental study to evaluate structural capacity of an embedded plate connected with prestressed concrete beam was performed. Embedded steel plates and prestressed concrete beam were connected with stud-bolts at the ends of concrete beam specimens. About 1,000 kN concentrated load was applied at 450mm away from the end of beam specimen. A 3,000 kN capacity static Oil-jack was used to direct concentrated load. The maximum strain of stud-bolt recorded $90{\times}10^{-6}$(mm/mm) and wide width cracks were not founded. Any falling failures of concrete and large deformations were not founded either between steel plate and prestressed concrete specimen. As a result, construction performance can be improved using this embedded steel plate connection system apply to large space educational facilities.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.320-325
• /
• 2009

In this study, a method to estimate the suspension bridge deflection is developed using mode decomposition technique. In order to examine the suspension bridge stability against these dynamic loadings, the prediction of displacement response is very important to evaluate bridge stability. However, it is recognized that any measurement of movement for suspension bridges may be difficult for the absence of proper methods to measure the displacement response on site. This study aims at suggesting a method to estimate the displacement response from the measured strain signals in an indirect way to predict the displacement response, not a direct way to measure the displacement response. Additionally, by applying the FBG sensors with multi-point measurements not influenced by electric noise, it can be expected that the technique would be applicable to infrastructures.

• Journal of Mechanical Science and Technology
• /
• v.15 no.2
• /
• pp.239-247
• /
• 2001

Measured radiative heat fluxes on the furnace exit plane of a heavy duty power boiler of steam output 1650 T/h are discussed. A high-ash pulverized bituminous coal was used. Such measurements are necessary to improve heat fluxes inside a steam boiler furnace was manufactured. An extra small heat radiation sensor was placed in the water cooled head of the probe. The sensor had no direct contact with furnace gases and measured only the radiant energy. There was no exposure to convective heat transfer. With the radiometric probe, one can obtain a spherical indicatrix of radiation intensity as well as hemispherical radiative heat flux incident on any surface passing through a measuring point inside the furnace. Thus, the quantity of radiation energy, passing through the furnace exit plane, to the convective heating surfaces and the quantity of radiation energy going in the opposite direction were measured. A formula for relative radiative heat flux on the furnace exit plane has been proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.97-107
• /
• 2007

The present CNC machining system if without any CAM software has been limited to 2D or 2.5D plane cut using lines, arcs and curves. If the CNC is equipped with a surface interpolation module and a surface reorganizing module inside it, we can easily try 3D surface machining without aid of CAM software. The existing NURBS surface interpolator is simple and direct to use for a unit surface. However, it enables only machining of each reference surface individually even when machining a simple composite surface. In this paper, we propose a method which can unify and reorganize various reference surfaces with a newly defined NURBS surface cycle command: a multi-repetitive cycle command such as in a CNC turning center. We also introduce a reorganizing rule for reference surfaces using NURBS properties. The usefulness of the proposed method is verified through computer simulation.