• Journal of Welding and Joining
• /
• 제33권3호
• /
• pp.75-80
• /
• 2015

Self-piercing riveting is an joining method of advanced high strength steels (AHSS) and other dissimilar materials. It has attracted considerable interest from the automotive industry. The SPR has become an interesting alternative joining technique for difficult to weld materials such as steels and aluminium alloys. In this paper, self-piercing rivet and anvil for SPR were designed for the joining conditions with AHSS and aluminium alloy. Various conditions of SPR were simulated for the design of rivets and anvils. The simulated results were in good agreement with experimental ones. As a result, over HV500 rivet is desirable to joint SPFC780 AHSS and aluminum alloy.

• 한국소음진동공학회논문집
• /
• 제15권5호
• /
• pp.536-541
• /
• 2005

This paper Presents the performance test of an impact hammer drill in conjunction with the parameter consideration of coefficient of restitution, lubrication and friction, pressure leakage, vibration damper and production quality. Novel measurement setups are innovated in order to get the Parameter data. The measured data are compared with the computational results, and this comparison gives a confidence on the computational model, which can be used for a optimal design of impact hammer drills.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.333-336
• /
• 2004

This paper presents performance of the impact hammer drill with coefficient of restitution, lubrication and friction, pressure leakage, damper efficiency and the general quality test. The novel measurement systems are introduced in order to get the reasonable data. The mechanism of strikers with inner pressure is revealed in the general quality test. Due to these factors we are able to make the computational analysis correctly.

• 헤리티지:역사와 과학
• /
• 제44권4호
• /
• pp.112-129
• /
• 2011

본고에서는 백제 한성기 중심지역에 해당되는 서울 몽촌토성, 서울 풍납토성, 서울 석촌동고분군, 하남 미사리유적에서 출토된 취사용기의 형태, 제작기법 등을 분석하여 그 전개양상에 대해 살펴보았다. 형태적 분석에서는 심발형토기는 동최대경이 동체상부에 위치하고 장란형토기는 동최대경이 동체중부에 위치하는 것으로 나타났고, 경부잘록도는 두 기종 모두 미비한 편이었다. 유적별로는 심발형토기의 경우 서울 석촌동고분군이 용량이 적고, 심도가 깊으며, 동최대경이 높은 것으로 확인되었다. 장란형토기는 서울 풍납토성이 하남 미사리유적보다 심도가 깊고, 동최대경은 동중부에 위치하며 경부잘록도가 큰 것으로 확인되었다. 제작기법 분석에서는 심발형토기는 용량군의 폭이 커질수록 유문내박자를 이용하여 타날하였는데, 외면에는 승문이 주로 확인되었다. 또한 기벽이 가장 얇은 것으로 나타났다. 이는 기술적 변화를 나타내는 것으로 시간성을 포함하고 있다. 장란형토기에서도 유문내박자를 사용한 토기가 기벽이 가장 얇고 경부의 잘록도는 약해지는 것으로 나타났으며, 구순부에 강한회전력에 의한 정면흔적이 관찰되었다. 두 기종 모두 유문내박자를 사용하면서 더욱 기벽을 얇게 제작할 수 있게 된 것으로 확인되었다. 백제 한성기 중심지역에서 출토된 심발형토기와 장란형토기는 태토나 소성에서는 시간성이 명확하지 않지만 제작기법상에서 그 전개양상을 확인할 수 있었다. 또한 그 제작기법의 변화양상에는 시간성도 반영되어 있는 점도 확인 할 수 있었다.

• Journal of Ginseng Research
• /
• 제22권4호
• /
• pp.223-228
• /
• 1998

As part of a study on the ability of fungicides to control disappearing root rot of ginseng (Panax quinquvdius) caused by Cylindruarpn destmtans, 15 fungicides were screened for toxicity to the fungus in vitro. Highly toxic fungicides were Benlate (benomyl), Thiram (thiram), and Orbit (propiconazole). EC5O values (mg a.i./L) were less than 1 and EC95 values were less than 10. Crown (carbathiin and thiabendazole), ASC-66835 (fluazinam), and UBI-2584 (tebuconazole) were moderately toxic, with EC5O values in the range 1-10 and EC95 values in the range 32-45. Weakly toxic fungicides (EC5O in the range 20-80, EC95 in the range 35-140) included UBI-2643 (thiabendazole), UBI-2565 (cyproconazole), and Vitaflo-280 (carbathiin and thiram). Anvil (hexaconazole), Vitaflo-250 (carbathiin), UBI-2383 (triadimenol), Daconil (chlorothalonil), CGA-173506 (fludioxonil), and CGA-169374 (difeno- conazole) were considered nontoxic to C. destmtan (EC5O 1.29->600, EC95>500). Relations between proportional inhibition of growth and concentration of fungicide were linear on arithmetic plots (Benlate, UBI-2643, UBI-2565, Vitaflo-280) or logarithmic plots (all other fungicides). Based on toxicity in vitro and formulation, it is recommended that Benlate, Orbit, and ASC-66835 be tested as soil drenches, and Benlate, Thiram, UBI-2584, and Crown be tested as seed treatments for controlling disappearing root rot.

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.78-84
• /
• 2015

Self-piercing rivet(SPR) is mechanical joining methods and which can be joining dissimilar materials. Unlike conventional riveting, SPR also needs no pre-drilled holes. During plastically deformation, SPR pierces upper sheet and joins it to under sheet. SPR has been mainly applied to the joining the automobile body and some materials, such as glass fiber reinforced polymer and aluminum alloy, which represent the sheet-formed materials for lightweight automobile. Glass fiber reinforced plastic(GFRP) has been considered as a partial application of the automobile body which is lighter than steels and stronger than aluminium alloys. It is needed SPR to join Al alloy sheets and GFRP ones. In this paper, in order to design the rivet and anvil, which are suitable for GFRP, the joinability was examined through simulations of SPR joining between GFRP and Al alloy sheets. For this study, AutoCAD was used for the modeling and the simulated using commercial FEM code DEFORM-2D. The simulated results for SPR process joining between GFRP and Al alloys were confirmed by the same conditions as experimental trials.

• 소성∙가공
• /
• 제27권5호
• /
• pp.276-280
• /
• 2018

This paper has developed a forging process for conical shells for making aluminum cylindrical large shells. An incremental forging process was applied to reduce forging loads and die cost. The preform is designed based on the crosssectional area of the final forged shape. Inner diameter of the preform for mandrel forging is constant, and outer diameter is conical so that it matches the cross-sectional area of the product. However, simulation confirmed that the larger diameter is smaller than predicted and the length is larger than predicted because in the initial stage of forging, the large diameter portion first comes into contact with the anvil at the initial stage of forging and stretches in longitudinal direction. So, it has developed a rule to design the preform considering 3-D deformation instead of plane strain deformation at the beginning stage of mandrel forging. The developed mandrel forging process can be applied to more similar products and economic benefits may be obtained.

• 한국결정학회지
• /
• 제12권2호
• /
• pp.102-112
• /
• 2001

단결정 실리콘의 기계적 손상거동에 대한 이해는 반도체 정밀가공의 관점에서 매우 중요하다. 최근 이루어지고 있는 Diamond Anvil Cell(DAC) 이나 압입시험을 통한 고압상연구로 부터 실리콘은 고압에서 일련의 상변화과정을 겪는다는 것이 알려지고 있으며 마찬가지로 실리콘에 다이아몬드 팁으로 scratching시험을 하는 과정에서 다양한 기계적인 손상과 응력상들이 나타날 수 있다. 본 연구에서는 단결정 실리콘에 대하여 scratching시험에 의하여 나 타나는 균열에 대하여 고찰하고 mirco-Raman 분광법을 사용하여 scratching에 의하여 나타나는 상을 분석하였다. 그 결과 scratching 방향과 속도에 따라 균열의 양상이 달라지며 scratching속도와 하중조건에 따라 여러가지 다른 상이 관찰됨을 확인하였다

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2209-2219
• /
• 1997

A split hopkinson bar could be used for obtaining the high strain rate material properties of sheet metals for an autobody. In high speed tensile tests of sheet matals, a new design of a tension split Hopkinson bar apparatus is needed. The design of grips and an anvil length are numerically analyzed with ABAQUS/Explicit for the new apparatus of split Hopkinson bars. From the experiments with the new apparatus, the material properties of SPCEN in the high strain rate state have been acquired and compared with quasi-static experimental results. The material properties of SPCEN as well as other sheet metals in an autobody are indispensible for the analysis of crashworthness. Nevertheless the experiment of sheet metal in the high strain rate state has not been done or reported.

• 한국광물학회지
• /
• 제29권4호
• /
• pp.191-198
• /
• 2016

인회석 광물 군에 속하는 녹연석($Pb_{4.85}(P_{1.02}O_4)_3Cl_{1.04}$)에 대한 상온-고압 상태방정식 연구를 시행하였다. 대칭형 다이아몬드 앤빌기기를 이용하여 33.4 GPa까지 압력을 증가시키면서 각분산 X-선 회절법과 방사광을 이용하여 회절 데이터를 검출하였으며, 시료에 가해준 압력은 루비 형광파의 파장변화를 측정하여 결정하였다. 본 고압실험에서 시행한 압력의 범위 내에서 상변이는 관찰되지 않았으며, 정압상태에서 체적탄성률($K_0$)은 $K{_0}^{\prime}=13(2)$일 때 80(7) GPa로 계산되었다. 본 연구에서 결정된 상온상태에서 녹연석의 체적탄성률 신뢰도를 정규화압력 및 정규화응력변형 분석을 하여 평가하였다.