• Proceedings of the Korea Crystallographic Association Conference
• /
• 2001.05a
• /
• pp.10-11
• /
• 2001

• Journal of the KSME
• /
• v.33 no.4
• /
• pp.315-321
• /
• 1993

당사의 CAD/CAM시스템은 미국 WRIST사와 CIM 추진에 계약을 체결한 1987년 6월이래 본격 적으로 도입되기 시작하였다. 그 이전에도 개별부서에서 CAD/CAM 시스템을 사용하고 있었 으나 체계적이지 못하고 단속적인 시스템에 지나지 않았다. 본격적으로 도입이 시작된 시스템은 386PC와 ANVIL이라는 소프트웨어를 중심으로 구성되어 있었으며 도입 초기단계에서는 별다른 문제점이 없이 시스템을 사용해 왔다. 그러나 1990년도에 들어서면서 규모가 커지고 PC가 가지는 한계점과 ANVIL이라는 소프트웨어 특성이 당사의 환경에 적절히 부응하지 못해 다른 시스템의 도입을 결정하게 되었고 많은 논란을 거쳐 현재 당사의 주 시스템인 Intergraph사의 시스템 도 입을 결정하게되었고 1992년 중반에 Intergraph의 워크스테이션을 중심한 시스템이 당사에 설 치되었다. 현재는 개별적 시스템 사용과 아울러 EDB(engineering deta base)와 CAPP(computer aided process planning) 시스템 구축을 위한 제반작업들이 활발히 진행중이다.

• Transactions of Materials Processing
• /
• v.14 no.9 s.81
• /
• pp.791-797
• /
• 2005

Extensive width reduction of slabs is an important technology for achieving continuous production between the steelmaking and hot rolling processes. However, the vertical horizontal rolling process has many disadvantages, e.g., large width deviations and less efficient width reduction. This study was carried out to investigate the deformation of slab by sizing press with two steps die. To do it, dog-bone and camber are discussed in width sizing process considering the deformation behavior according to the deviation of anvil velocity and the deviation of initial slab temperature. In this paper, the various causes of the sizing press phenomena are mentioned for the purpose of understanding of rolling conditions. As a result, the optimal anvil shape having a minimum-forming load is obtained by FE-simulation and ANN.

• Journal of the Mineralogical Society of Korea
• /
• v.9 no.1
• /
• pp.35-42
• /
• 1996

Polycrystalline ZrH2 in tetragonal crystal system has been compressed in a modified Bassett-type diamond anvil cell up to 36.0 GPa at room temperature. X-ray diffraction data did not indicate any phase transitions at the present pressure range. The pressure dependence of the a-axis, c-axis, c/a and molar volume of ZrH2 was determined at pressures up to 36.0 GPa. Assuming the pressure derivative of the bulk modulus (K0') to be 4.11 from an ultrasonic value on Zr, bulk modulus (K0) was determined to be 160Gpa by fitting the pressure-volume data to the Birch-Murnaghan equation of state. Same sample was heated at $500^{\circ}C$ at the pressure of 9.8 GPa in a modified Sung-type diamond anvil cell. Unloaded and quenched sample revealed that the original tetragonal structure transforms into a hexagonal structured phase with a zero-pressure molar volume change of ~115.5%.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.4
• /
• pp.34-38
• /
• 2019

Multilayered high-temperature superconductor coated conductor (CC) tapes are used in an extensive range of applications and are exposed to many stresses such as hoop stress, radial/transverse tensile stress under large Lorentz forces, and thermal stress while cooling if thermal expansion properties differ. Loads induced transversely at the tape surface inevitably create delamination phenomena in the multilayered CC tapes. Thus, delamination behaviors of CC tapes along the c-axis under transverse loading conditions, which can vary based on manufacturing process and constituent layers, must be characterized for applications. The anvil test method was used to mechanically investigate the delamination characteristics of various commercially available Ag-stabilized CC tapes at room temperature and 77 K, finding superior strength at the latter. The wide variations found depended on tape structure and fabrication technique. Fractographic morphologies of delaminated tapes supported the findings under transverse loading conditions.

• Korean Journal of Optics and Photonics
• /
• v.24 no.5
• /
• pp.279-286
• /
• 2013

Brillouin spectroscopy has been widely used for the investigation of acoustic properties of condensed matters in the hypersonic region. A high-pressure Brillouin spectrometer was set up by combining a diamond anvil cell and a tandem multi-pass Fabry-Perot interferometer. It was successfully applied to liquid ethanol, and the pressure dependence of the sound velocity, the refractive index and other acoustic properties were derived based on the measurements. The detailed optical setup and experimental procedure are described.

• The Journal of the Petrological Society of Korea
• /
• v.3 no.1
• /
• pp.34-40
• /
• 1994

High pressure X-ray diffraction study was carried out on a graphite to investigate its compressibility as well as any possible phase transition to the hexagonal diamond structure at room temperature. Energy dispersive X-ray diffraction method was introduced using a Mao-Bell type diamond anvil cell with Synchrotron Radiation. Polycrystalline sodium chloride was compressed together with graphite for the high pressure determinations. Because of the poor resolution of the X-ray diffraction pattern of graphite, its compressibility was estimated to be almost same as that of NaCl by graphite (002) X-ray diffraction peak only. An observation of any new peak from a possible hexagonal diamond phase seems very unplausible for its definite identification based on the present data. Alternative approaches such as an Wiggler Radiation source as well as a Large Volume high pressure apparatus will be necessary for the detailed studies on a graphite in future.

• Journal of the Korean Society of Costume
• /
• v.17
• /
• pp.137-148
• /
• 1991

The use of bark cloth, made of the inner bark of certain trees, was widespread along tropical zones from the Africa to the Hawaii encompassing the globe. They include Malaysia, Indonesia, New Guinea, Polynesian Islands and South America. Among them the Hawaiian bark cloth, named Kapa(pronounced as tapa) was rated as the best quality and most admired. It has variety in designs and colors as well as the most sophistcated production methods. The distinct processes of kapa making are composed of two stages. The first is called first beating and it is a preparatory stage to beat the sea-water soaked bast. It was done with a round beater on a stone anvil. The second beating process was carried out with the squared beater and wooden anvil. The strips from the first beating was soaked again in the water and then beaten lightly to break up fibers. The craftmen laid a bundle of strips over the anvil and beat it into pieces of kapa. The second beater of Hawaii was the most characteristic one among bark cloth producing countries. On their surfaces were the engraved patterns, which were creation of theirs. These distinguished designs enabled them to produce the kapa with the thinner and finer texture and an elaboration of impressed designs known as "watermaks". The Hawaiian culture was self-sufficient one : Everything they used was of their own creation until 19th century. Among their inventions of printing designs on kapa are three most important and distinguished processes. They are the overlaying, the cord snapping and the block printing techniques. Their inventiveness as well as self sufficient environment made it possible to develop their fine art of the kapa making. It is said that the mass producing and cheap western technology of loom forced them to gradually abandon their traditional art and as a result this fine and valuable legacy of Hawaiian traditional kapa making technique is all but disappeared. However it is encouraging and heart warming to find that some of the people as well as specialized researchers pined together to form a group to try to reproduce the old kapa and study the traditional art. They consider the kapa as an expression of the ethnic identity with Hawaii's heritage as well as valuable art of human history.

• Journal of the Korean Ceramic Society
• /
• v.48 no.5
• /
• pp.471-478
• /
• 2011

Investigations of crystal structure and phase transition of $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics doped with A-site substitution impurity (La, Nd) or B-site substitution impurity (Sb, Nb) at 2 mol% concentration were carried out. X-ray diffraction patterns of impurities doped $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics have been measured at pressures up to ~5 GPa with diamond anvil cell and synchrotron radiation. The patterns were obtained at room temperature using methanol-ethanol mixture as pressure-transmitting media. In order to refine the crystal structure, Rietveld analysis has been performed. The structures of impurities doped $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics are tetragonal in space group P4mm at ambient pressure and are transformed into a cubic phase in space group Pm$\bar{3}$m as the pressure increases. In this study, when A-site substitution donor $La^{3+}$ or $Nd^{3+}$ ion was added to $Pb(Zr_{0.52}Ti_{0.48})O_3$ ceramics, the phase transition phenomena showed up at the pressure of 2.5~4.6 GPa, but when B-site substitution donor $Nb^{5+}$ or $Sb^{5+}$ ion was added to it, the phase transition appeared at relatively lower pressure of 1.7~2.6 GPa.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.3
• /
• pp.57-61
• /
• 2022

One of the major applications of REBCO coated conductor (CC) tapes is in superconducting magnets or coils that are designed for high magnet fields. For such applications, the CC tapes were exposed to a high level of stresses which includes uniaxial tensile or transverse compressive stresses resulting from a large magnetic field. Thus, CC tapes should endure such mechanical load or deformation that can influence their electromechanical performance during manufacturing, cool-down, and operation. It has been reported that the main cause of critical current (I_c) degradation in CC tapes utilized in coil windings for superconducting magnets was the delamination due to transversely applied stresses. In most high-magnetic-field applications, the operating limits of the CC tapes will likely be imposed by the electromechanical properties together with its I_c dependence on temperature and magnetic field. In this study, we examined the influence of the transverse compressive stress on the I_c degradation behaviors in various commercially available CC tapes which is important for magnet design Four differently processed REBCO CC tapes were adopted to examine their I_c degradation behaviors under transverse compression using an anvil test method and a newly developed instantaneous I_c measurement system. As a result, all REBCO CC tapes adopted showed robustness against transverse compressive stresses for REBCO coils, notably at transverse compressive stresses until 250 MPa. When the applied stress further increased, different Ic degradation behaviors were observed depending on the sample. Among them, the one that was fabricated by the IBAD/MOCVD process showed the highest compressive stress tolerance.