• Textile Coloration and Finishing
• /
• v.12 no.3
• /
• pp.199-206
• /
• 2000

Silk fabric was dyed using methanol extract of Chrysanthemum boreale at $60^\circ{C}$ for 40min. The K/S value of the silk fabric was highest in the premordanting method, while the amount of absorbed mordant was largest in the Cu-mordanting. The surface colors of the dyed fabric highly depended upon mordants or mordanting methods. For all cases, the value of the dyed fabric was dark. The chroma was high by using the Cr-mordant and the color difference was distinct by using the Fe-mordant. Cu-mordanted silk showed highest fastness to light. Dyed silk fabrics by mordanting method showed good antimicrobial activity ad deodorization property.

• Textile Coloration and Finishing
• /
• v.11 no.3
• /
• pp.32-40
• /
• 1999

Chitosan fiber was prepared by wet spinning with various draw ratio. Chitosan fiber was coated with f-carboxymethyl keratein(SCMK) by extruding chitosan solution into 1 M NaOH solution containing 1% SCMK. Among three chitosan used in this study(chitosans of 5 cps, 50 cps, 100 cps), 50 cps chitosan gave the best tenacity and optimum concentration was 5%. SCMK coating increased the tenacity of chitosan fiber. Regardless of SCMK coating, tenacity and elongation of both chitosan fibers were increased with the increase of draw ratio. Chitosan fiber showed antimicrobial activity against Staphyloccus aureus showing 66∼72% of bacteria reduction rates. On the other hand, chitosan fiber coated with SCMK didn't show any antimicrobial activity.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.271-279
• /
• 2016

This study deals with antibacterial properties of nylon fiber treated with glycidyltrimethylammonium chloride(GTAC) and silver nanoparticles(AgNPs). Nylon fibers were soaked into GTAC(2-30%, v:v) solution for 20 min. After sample was pre-drying at $80^{\circ}C$ for 10min and cured at $180^{\circ}C$ for 5min. The AgNPs coating was accomplished by soaking in silver colloid solution at $45^{\circ}C$ for 90min. The coated nylon fibers were characterized by scanning electron microscopy-energy dispersive spectroscopy(SEM-EDS). EDS analysis indicated that AgNPs and GTAC was attached on nylon fibers. The treated nylon fibers showed antimicrobial properties against Escherichia coli(ATCC 43895), Pseudomonas aeruginosa(ATCC 13388) and Staphylococcus aureus(ATCCBAA-1707).

• Textile Coloration and Finishing
• /
• v.11 no.5
• /
• pp.30-37
• /
• 1999

The extracts drawn out from Artemisia princeps by water was concentrated. Using this concentrate the silk and the cotton fabrics were dyed, and they were measured with the K/S value, surface color and mordant quantity in order to evaluate the dyeability and the antimicrobial activity. The results are as follows; 1. The K/S value of the silk fabric was much higher than that of the cotton fabric. And the color yield of the dyed silk fabric was most efficient for the premordanting method. 2. The surface colors on the dyed fabric depended heavily upon mordants used or mordanting methods. For all cases, the value of the dyed fabric was generally dark. For the Cr-mordant among various mordants, the chroma produced clear and the color difference was distinct when using the Fe-mordant. 3. On the other hand the amount of absorbed mordant in the silk fabric was larger than that of the cotton fabric. And the Cu-mordant was most efficient. 4. The color fastness was significantly improved when mordants were added. Cr-mordant improved best in all of the dry cleaning, wet cleaning and perspiration fastness. Iron and abrasion fastness showed over 4-5 grade regardless of any mordant. And light fastness was best in Cu-mordant. 5. The Cu-mordant showed the greatest antimicrobial activity in both of mordant treat silk and cotton fabrics.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.18-26
• /
• 2012

In this work, colorants extraction process from gromwell was studied for making powder form of colorants by solving the high viscosity problem of gromwell extracts. In order to do that, sugar extracted together with colorants must be pre-extracted. For sugar decomposition, gromwell roots were pretreated with various enzyme solutions. The total sugar content of pre-extract with enzyme solution was measured. Accordingly, the effects of enzyme type and pretreatment condition on sugar decomposition were investigated to find appropriate enzyme(amylase, hemicellulase, pectinase) and enzyme activity (100~1000unit), pre-extracted time(3~24hr). Color characteristics and dye uptake of dyed fabrics were evaluated. Gromwell colorants were assessed for their potential antimicrobial activities, which possibly expand their end use as functional pigments. The efficiency of removing sugar was increased in the order of hemicellulase, pectinase, amylase, $H_2O$. Gromwell colorants powder yield was in the range of 4.4% to 9.8% depending on pretreatment enzyme. Gromwell colorants produced RP color on the silk and wool fabrics with good dye uptake. Antimicrobial activity of gromwell colorants will greatly increase its potentiality for applying as functional natural colorants in the future.

• Textile Coloration and Finishing
• /
• v.24 no.4
• /
• pp.247-252
• /
• 2012

The objective of this study was to find an appropriate method and process for protecting the green color in bamboo leaves and subsequent extraction of the green colorants, chlorophyll. Various inorganic salts including cupric sulfate, ferric sulfate, and zinc chloride were employed as green color protectors. Accordingly, the effects of metal salts and treatment conditions on color protection were investigated to find appropriate protector and conditions. And also, the efficacy of bamboo colorants as a natural green dye was evaluated through dyeing and colorfastness tests. Antimicrobial activity of dyed fabrics was measured by shake flask method in terms of bacterial reduction rate using Staphylococcus aureus(ATCC 6538). On the basis of experimental results for stabilizing bamboo leaves colorants, it was confirmed that Cu was the most appropriate metal type considering dye uptake, photostability and light fastness, and its optimum concentration was 0.025%. After the stabilization, the colorants were extracted efficiently at NaOH aqueous solution of 1.00%. It was concluded that bamboo leave has a high potentiality as new resources to produce a natural green dye with antimicrobial functionality.

• Textile Coloration and Finishing
• /
• v.15 no.3
• /
• pp.146-153
• /
• 2003

This article describes the metal ions adsorption of chitosan fibers. The chitosan fibers were manufactured by wet spinning using 2% acetic acid as solvent, 10% aqueous sodium hydroxide as non solvent, and 4%chitosan solution as a solvent. The adsorption characteristics of chitosan fibers towards 100ppm solutions of various metal ions such as Cu(II), Cd(II), Cr(III), Hg(II) were examined at different pH value by ICP-Atomic Emission Spectrometer. The adhesiveness of metallic ions to the chitosan fiber were increased with the increase of pH and the decrease of denier. On the other hand, from pH4, chitosan fiber that is immersed in metal ion aqueous solution of Cu(II) and Cd(II) became homogeneous solution because is dissolved. The adhesiveness of metallic ions to chitosan fiber were found to increased in a sequence of Hg(II)> Cr(III)> Cu(II)> Cd(II). The antimicrobial characteristics of the chitosan fiber by adhered metal ions, virgin chitosan fiber, and cotton fiber were evaluated. The antimicrobial activity of the fibers were increased with the decrease of denier.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.33-41
• /
• 2019

In this report, nano-sized catalysts were introduced onto fabric surface to eliminate toxic chemicals assisted by physical adsorption. For chemical removal of toxic compounds, a series of zirconium-containing catalysts were synthesized and treated on fabric to catalyze the hydrolysis and oxidation of target molecules. Antimicrobial was also introduced for the research purpose to prove the compatibility of as-synthesized catalysts with other solutions. Zirconium ligated with hydroxyl group and MOF(Metal-Organic Frameworks) were exploited as catalyst for removal of toxic compounds, while zinc complex was used for an antimicrobial to culminate in a chemical shield. Once fabrics were functionalized, fabrics were washed 2 or 5 times for a washing durability test. The amount of catalyst in textile were measured by ICP-MS and weight increasing ratio of fabrics.

• Textile Coloration and Finishing
• /
• v.33 no.1
• /
• pp.24-30
• /
• 2021

In this study, PET containing 3% silver ion-exchange zeolite was mixed with cotton in a ratio of 6:4 to prepare a spun yarn to evaluate the tensile strength, absorption speed, absorption rate, antibacterial property, and the efficiency of deodorization. As a result, the following conclusions were obtained. First, it can be confirmed that silver ion exchange zeolite is evenly distributed inside and on the surface of the antimicrobial PET-SF through SEM. It was found that the tensile strength between the CVC sample mixed with silver ion zeolite PET and cotton and the normal cotton 100% sample was slightly lower in the CVC sample. Although the absorption speed and water absorption rate were measured to find out the moisture characteristics, it was confirmed that there was no significant difference. The contact angle was slightly larger in the antimicrobial CVC sample, but the time it took for the moisture to completely penetrate into the knit fabric was 0.85 seconds. In addition, it was found that out of the total mixing ratio, 40% of antibacterial PET was spun with regular cotton to produce yarn, which had an excellent bacteria reduction rate of 99.9% and a deodorization efficiency of 85%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.3 s.35
• /
• pp.216-221
• /
• 1990

This study was performed for the development of antimicrobial finished nonwoven fabrics with water repellency. And it was aimed to examine the changes of moisture related properties and air permeability of the finished fabrics. Viscose rayon nonwoven fabrics were treated with organic silicon quaternary ammonium salt having carbon numbers of 16, which was synthesized for this study Antimicrobial activity was evaluated by shake flask method and the reactivity of antimicrobial agent was measured by degree of luminescence from inductively coupled plasma. Water repellency of treated specimen was evaluated by dynamic water absorption measurement and air permeability was measured by Frazier method. The results obtained from this study were as follows: 1. Excellent antimicrobial activity was obtained for the high concentration of treatment and the durability of finishing after laundering was better as the treatment concentration was higher 2. Silicon contents taken up by specimen increased with increased treatment concentration. 3. Dynamic water absortion of treated specimen decreased compared to that of untreated. And, it was lowered as the treatment of concentration increased and as the silicon content increased. 4. Moistuie regain and uptake with lapse of time of treated specimen increased compared to those of untreated. But, air permeability of treated specimen decreased.