• Advances in nano research
• /
• v.10 no.2
• /
• pp.191-210
• /
• 2021

To compare the antifungal effect of two nanomaterials (NMs), nanoparticles of zinc oxide were synthesized by a chemical route and zinc oxide-based nanobiohybrids were obtained using green synthesis in an extract of garlic (Allium sativum). The techniques of X-Ray Diffraction (XRD), Infrared (IR) and Ultraviolet Visible (UV-Vis) absorption spectroscopies and Scanning (SEM) and Transmission Electron Microscopies (TEM) were used to determine the characteristics of the nanomaterials synthesized. The results showed that the samples obtained were of nanometric size (< 100 nm). To compare their antifungal capacity, their effect on Cercospora sp. was evaluated. Test results showed that both nanomaterials had an antifungal capacity. The nanobiohybrids (green route) gave an inhibition of fungal growth of ~72.4% while with the ZnO-NPs (chemical route), inhibition was ~87.1%. Microstructural studies using High Resolution Optical Microscopy (HROM) and ultra-structural analysis using TEM carried out on the treated strains demonstrated the effect of the nanofungicides on the vegetative and reproductive structures, as well as on their cell wall. To account for the antifungal effect presented by ZnO-NPs and ZnO nanobiohybrids on the fungi tested, effects reported in the literature related to the action of nanomaterials on biological entities were considered. Specifically, we discuss the electrical interaction of the ZnO-NPs with the cell membrane and the biomolecules (proteins) present in the fungi, taking into account the n-type nature of the ZnO semiconductor and the electrical behavior of the fungal cell membrane and that of the proteins that make up the protein crown.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3530-3538
• /
• 2010

In this study 1-[4-(2-methoxy benzyl)-6-aryl-pyridazin-3(2H)-ylidene] hydrazines were used for the synthesis of new heterocyclic systems such as thiazolidine, phthalazine, pyrazolo, tetrazolo, hydrazide and new pyridazine derivatives to explore the effect of silver nanoparticles on their biological activity efficiency. Structures of the new heterocycles were characterized by the aid of several analytical techniques including; $^1H$-NMR, FTIR and mass spectra. Silver nanoparticles were synthesized by a simple methodology and the formation of silver nanoparticles was confirmed by transmission electron microscopy (TEM) and UV studies. Most of the new prepared heterocycles were evaluated in vitro as new antimicrobial agents. Combination effects of the silver nanoparticles on the antimicrobial activity of the new heterocycles were investigated using the disk diffusion method. Compound 10a exhibited the strongest enhancing effect of silver nanoparticles solution against Aspergillus flavus and Candida albicans.

• Journal of Microbiology
• /
• v.45 no.5
• /
• pp.460-465
• /
• 2007

This study was carried out in order to investigate the potential of using plant oils derived from Leptospermum petersonii Bailey and Syzygium aromaticum L. Merr. Et Perry as natural antifungal agents. The antifungal effects of essential oils at concentrations of 0.05, 0.1, 0.15, and 0.2 mg/ml on the dermatophytes Microsporum canis (KCTC 6591), Trichophyton mentagrophytes (KCTC 6077), Trichophyton rubrum (KCCM 60443), Epidermophyton floccosum (KCCM 11667), and Microsporum gypseum were evaluated using the agar diffusion method. The major constituents of the active fraction against the dermatophytes were identified by gas chromatography-mass spectrometry and high-performance liquid chromatography analysis. The antifungal activities of S. aromaticum oil (clove oil) against the dermatophytes tested were highest at a concentration of 0.2mg/ml, with an effectiveness of more than 60%. Hyphal growth was completely inhibited in T. mentagrophytes, T. rubrum, and M. gypseum by treatment with clove oil at a concentration of 0.2 mg/ml. Eugenol was the most effective antifungal constituent of clove oil against the dermatophytes T. mentagrophytes and M. canis. Morphological changes in the hyphae of T. mentagrophytes, such as damage to the cell wall and cell membrane and the expansion of the endoplasmic reticulum, after treatment with 0.11 mg/ml eugenol were observed by transmission electron microscopy (TEM). At a concentration of 0.2 mg/ml, L. petersonii oil (LPO) was more than 90% effective against all of the dermatophytes tested, with the exception of T. rubrum. Geranial was determined to be the most active antifungal constituent of L. petersonii oil. Taken together, the results of this study demonstrate that clove and tea tree oils exhibited significant antifungal activities against the dermatophytes tested in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.3
• /
• pp.247-257
• /
• 2013

This study was to investigate the antifungal activity of Larix kaempferi essential oil against dermatophytes, Epidermophyton floccosum, Trichophyton mentagrophytes and Trichophyton rubrum. The active components of L. kaempferi against dermatophytes were determined (characterized by GC-MS), and the morphological changes of the dermatophytes exposed to the L. kaempferi essential oil were observed by electron microscope. Main component of L. kaempferi essential oil was (-)-bornyl acetate. In antifungal activity tests, MIC of L. kaempferi crude oil was 125 ppm on every fungi and 100% (agar dilution method) at more than 500 ppm. By using SEM and TEM, the fungal morphology of E. floccosum exposed to the L. kaempferi essential oil was different from that of normal hyphal morphology. Hyphae exposed to the L. kaempferi essential oil was damaged with distorted and collapsed surfaces. In addition, there were destruction and disorganization of organelles in cytoplasm and collapse of cell membrane. Active antifungal components from L. kaempferi essential oil were identified as terpene alcohol compounds like (-)-${\tau}$-muurolol, (+)-terpinen-4-ol, ${\alpha}$-terpineol, and ${\alpha}$-cadinol.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2645-2648
• /
• 2014

In this paper ultrafine copper nanoparticles (CuNPs) were prepared from copper salt via chemical reduction method with sodium citrate dispersant and polyvinylalcol (PVA) capping polymer. The colloidal CuNPs were characterized by using UV-Visible spectroscopy, Transmission Electron Microscopy (TEM), and X-ray Diffraction (XRD) techniques. Our obtained results indicated that the CuNPs were produced ranging from 2 to 4 nm in diameter. The colloidal solution at 7 ppm of CuNPs exhibited a powerful antifungal activity against Corticium salmonicolor (C. Salmonicolor). Fungal killing assays showed colloid solutions containing 10 ppm of CuNPs killed entirely the cultured fungus. A highly killing activity against the fungus was also performed when the CuNPs were sprayed on pink disease-infected rubber trees. These positive results may offer a great potential to produce CuNPs-based eco-fungicide for pink disease.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.389-395
• /
• 2009

To develop the carrier of hydrophobic antifungal agents based on low molecular weight water-soluble chitosan (LMWSC), LMWSC was chemically modified with deoxycholic acid (DA) which is one of the bile acid as a hydrophobic group. The nanoparticles (WSCDA) using DA conjugated LMWSC were characterized using dynamic light scattering (DLS) and transmittance electron microscope (TEM). The particle size of WSCDA ranged from 250 to 350 nm and increased with the number of DA substitution. The loaded itraconazole as an antifungal agent WSCDA nanoparticles (WSCDA-ITCN) were prepared by solvent evaporation method. The drug content and the loading efficiency were investigated approximately $9{\sim}10%$ and $61{\sim}68%$ by UV spectrophotometer, respectively. The release of drug from nanoparticles was slow and showed sustained release characteristics. Based on the results of release study that the higher DA contents in WSCDA, the slower the releasing rate, the WSCDA-ITCN could be used as an excellent antifungal agent.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.3
• /
• pp.284-294
• /
• 2006

Statement of problem. Proliferation of Candida albicans is primarily within the plaque on the fitting surface of the denture rather than on the inflamed mucosa. Consequently, the treatment of the denture is equally important as treatment of the tissue. Cleansing and disinfection should be efficiently carried-out as the organisms can penetrate into the voids of the acrylic resin and grow in them, from which they can continue to infect and reinfect bearing tissues. Purpose. The purpose of this study was to evaluate the applicability of photocatalytic reaction to eliminate Candida albicans from acrylic resin denture base, and to investigate the anti-fungal effect with various UVA illumination time. Materials and Methods. The specimens were cured by the conventional method following the manufacturer's instruction using thermal polymerized denture base resin (Vertex RS: Dentimex, Netherlands). $TiO_2$ photocatalyst sol(LT), which is able to be coated at normal temperature, was made from the Ti-alkoxide progenitor. The XRD patterns, TEM images and nitrogen absorption ability of the $TiO_2$ photocatalyst sol(LT) were compared with the commercial $TiO_2$ photocatalyst P-25. The experimental specimens were coated with the mixture of the $TiO_2$ photocatalyst sol(LT) and binder material (silane) using dip-coater, and uncoated resin plates were used as the control group. Crystallinity of $TiO_2$ of the specimen was tested by the XRD. Size, shape and chemical compositions were also analyzed using the FE-SEM/ EDS. The angle and methylene blue degradation efsciency were measured for evaluating the photocatalytic activity of the $TiO_2$ film. Finally, the antifungal activity of the specimen was tested. Candida albicans KCTC 7629(1 ml, initial concentration $10^5$ cells/ ml) were applied to the experiment and control group specimens and subsequently two UVA light source with 10W, 353 nm peak emission were illuminated to the specimens from 15cm above. The extracted $2{\mu}l$ of sample was plated on nutrient agar plate ($Bacto^{TM}$ Brain Heart Infusion; BD, USA) with 10 minute intervals for 120 minute, respectively. It was incubated for 24 hours at $37^{\circ}C$ and the colony forming units (CFUs) were then counted. Results. Compared the characteristics of LT photocatalyst with commercial P-25 photocatalyst, LT were shown higher activity than P-25. The LT coated experimental specimen surface had anatase crystal form, less than 20 nm of particle size and wide specific surface area. To evaluate the photocatalytic activity of specimens, methylene blue degradation reaction were used and about 5% of degradation rate were measured after 2 hours. The average contact angle was less than $20^{\circ}$ indicating that the LT photocatalyst had hydrophilicity. In the antifungal activity test for Candida albicans, 0% survival rate were measured within 30 minute after irradiation of UVA light. Conclusion. From the results reported above, it is concluded that the UVA-LT photocatalytic reaction have an antifungal effect on the denture surface Candida albicans, and so that could be applicable to the clinical use as a cleaning method.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.113-123
• /
• 2016

This study was to investigate the antifungal activity of A. holophylla essential oil against dermatophytes, such as Epidermophyton floccosum, Trichophyton mentagrophytes and Trichophyton rubrum, and to determine the potential effective compound as dermatitis treatment. To evaluate the potential antifungal activities of A. holophylla essential oil and its fractions, paper disc diffusion and agar dilution method tested with morphological observation. Also, their major constituents were analyzed by GC/MS. To determine synergic effects of active ingredient from A. holophylla essential oil were carried out by checkerboard microtiter plate testing. The morphological changes of the dermatophytes exposed to active fraction G4 were observed by electron microscopes. As the results, the highest activities were identified in the fraction containing ${\alpha}$-bisabolol. A mixture of ${\alpha}$-bisabolol and bornyl acetate showed the synergy effects, expressing high potential effects. Also, morphological observation using electron microscopes showed a dramatic changes of cell membrane of E. floccosum and T. rubrum exposed to fraction G4 containing ${\alpha}$-bisabolol. In conclusion, A. holophylla essential oil and its constituents were expected to be used as antifungal agent or raw material for dermatitis therapy.

• Advances in nano research
• /
• v.5 no.2
• /
• pp.127-140
• /
• 2017

Metal nanoparticles have been intensively studied within the past decade. Nano-sized materials have been an important subject in basic and applied sciences. Zinc oxide nanoparticles have received considerable attention due to their unique antibacterial, antifungal, and UV filtering properties, high catalytic and photochemical activity. In this study, microbiological aspects of scale formation in PVC pipelines bacteria and fungi were isolated. In the emerging issue of increased multi-resistant properties in water borne pathogens, zinc oxide (ZnO) nanoparticle are being used increasingly as antimicrobial agents. Thus, the minimum bactericidal concentration (MBC) and minimum fungal concentration of ZnO nanoparticles towards pathogens microbe were examined in this study. The results obtained suggested that ZnO nanoparticles exhibit a good anti fungal activity than bactericidal effect towards all pathogens tested in in-vitro disc diffusion method (170 ppm, 100 ppm and 30 ppm). ZnO nanoparticles can be a potential antimicrobial agent due to its low cost of production and high effectiveness in antimicrobial properties, which may find wide applications in various industries to address safety issues. Stable ZnO nanoparticles were prepared and their shape and size distribution characterized by Dynamic light scattering (35.7 nm) and transmission electron microscopic TEM study for morphology identification (20 nm), UV-visible spectroscopy (230 nm), X-ray diffraction (FWHM of more intense peak corresponding to 101 planes located at $36.33^{\circ}$ using Scherrer's formula), FT-IR (Amines, Alcohols, Carbonyl and Nitrate ions), Zeta potential (-28.8). The antimicrobial activity of ZnO nanoparticles was investigated against Bacteria and Fungi present in drinking water PVC pipelines biofilm. In these tests, Muller Hinton agar plates were used and ZnO nanoparticles of various concentrations were supplemented in solid medium.