• Natural Product Sciences
• /
• v.21 no.3
• /
• pp.192-195
• /
• 2015

An antibacterial benzoquinone, 2,6-dimethoxy-1,4-benzoquinone, isolated from Ficus foveolata stems was used as a standard marker for establishment of quantitative HPLC analysis for the stem extracts of F. foveolata. The method utilized a TSK-gel ODS-80Ts column (5 μm, 4.6 × 250 mm) with the mixture of methanol and 5% acetic acid in water (24:76, v/v) as the mobile phase at a flow rate of 1 mL/min, and quantitative detection at 289 nm. The parameters i.e. linearity, intraday and interday precision, accuracy, specificity and sensitivity of the method were evaluated for method validation. The recoveries of the method were 99.5 - 103.6% and good linearity (R² ≥ 0.9999) was obtained. A high degree of specificity, sensitivity as well as repeatability and reproducibility (RSD less than 2 and 5%, respectively) were also achieved. Chloroform was served as the most suitable solvent for extraction of 2,6-dimethoxy-1,4-benzoquinone. The optimised sample preparation and HPLC method can be practically used in the routine quality control process of F. foveolata stem extracts.

• Korean Journal of Materials Research
• /
• v.28 no.12
• /
• pp.685-690
• /
• 2018

In this study, a multifunctional ophthalmic lens material with an electromagnetic shielding effect, high oxygen permeability, and high water content is tested, and its applicability is evaluated. Metal oxide nanoparticles are applied to the ophthalmic lens material for vision correction to shield harmful electromagnetic waves; the pyridine group is used to improve the antibacterial effect; and silicone substituted with urethane and acrylate is employed to increase the oxygen permeability and water content. In addition, multifunctional tinted ophthalmic lens materials are studied using lens materials with an excellent antibacterial effect (2,6-difluoropyridine, 2-fluoro-4-pyridinecarboxylic acid) and functional (UV protection, high wettability) lens materials (2,4-dihydroxy benzophenone, 2-hydroxy-4-(methacryloyloxy)benzophenone). To solve problems such as air bubbles generated during the polymerization process for the manufacturing and turbidity of the lens surface, polymerization conditions in which the defect rate is minimized are determined. The results show that the polymerization temperature and time are most appropriate when they are $110^{\circ}C$ and 40 minutes, respectively. The optimum injection amount of the polymerization solution is 350 ms. The turbid phenomenon that appears in lens processing is improved by 10 to 95 % according to the test time and conditions.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.534-537
• /
• 2008

Growing attention has been given to sterilizing and antibacterial effects of nano-silver, recently. Nano-silver solution can be applied to the heat exchanger in an air conditioner to prevent bad smell or bacteria. The present study is directed at the nozzle spray characteristics over a heat exchanger. This problem is of particular interest in the design of a nano-silver HVAC system. The effects of nozzle position and flow rate on the spray area over a horizontal surface have been investigated for various nozzles. The results obtained indicate that spray area is increased as the height of spray position is increased or mass flow rate is increased. The wetted area over a practical heat exchanger is also studied at a given nozzle height. It is found that the wetted area is gradually increased with an increase in the flow rate. However, the effect of flow rate on the wetted area is a little affected by flow rate in the range of too much flow rate. It is also found that the wetted area is decreased as the inclination angle of a heat exchanger is increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.2
• /
• pp.288-296
• /
• 2019

This study examined the proper dyeing conditions, color fastness and functionality for wool fabrics dyed with Chamaecyparis obtusa leaf extract. FT-IR and UV-Vis spectrum analysis showed that tannin and flavonoids were contained in the extracted colorant. The dyeing of wool fabrics using Chamaecyparis obtusa leaf was good without pretreatment or mordant treatment. Optimal dyeing conditions for wool fabrics were a colorant concentration of 70%(v/v), dyeing temperature of $100^{\circ}C$, dyeing time of 100 minutes and dyebath pH of 5.8. Color fastness of dyed wool fabrics to washing, rubbing, perspiration was good, whereas light was grade 3. The UV protection rate and deodorization rate of wool fabrics dyed with Chamaecyparis obtusa leaf improved. Reduction rate of Staphylococcus aureus/Klebsiella pneumoniae were excellent at 99.9%. Therefore, it was confirmed that Chamaecyparis obtusa leaf can be used as environ-mentally friendly natural dye.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.2
• /
• pp.91-98
• /
• 1996

Precipitation was formed during the preparation of decoction from a mixure of Scutellariae Radix and Coptidis Rhizoma or Phellodendri Cortex according to the prescription of Hwang-ryean-hae-dog-tang. Baicalin and berberine, the active ingredients of the two herbal medicine were identified in coprecipitated product. Pills were prepared using the coprecipitated product and various binders. The dissolution rate of baicalin and berberine from pills was increased in at pH1.2 when acacia or tragacanth was used. The absorption rate of baicalin from the coprecipitated product was faster than that from Scutellaria extract, but the absorption of berberine from CPP was slower in stomach, duodenum and jejunum of rats compared with Coptis extract. The time required for the maximum serum concentration (Cmax) of baicalin and berberine from CPP in mice were 150 and 200 min after oral administration, respectively. The maximum serum concentration of baicalin from CPP in mice was higher than Scutellaria extract, but the concentration of berberine was lower compared with Coptis extract. The minimum inhibitory concentration of CPP was below $50\;{\mu}g/ml$ against gram positive bacteria, and was higher than that against gram negative bacteria. The antibacterial activity of CPP was lower than that of herberine, but was more potent than Scutellaria extract. It was found that the inhibition rates of growth by CPP against S. epidermidis, K. pneumoniae, B. cereus and S.aureus were 60.0, 51.1, 45.4 and 39.9%, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.412-412
• /
• 2014

Zinc oxide (ZnO) is one of the most powerful materials for purifying organic pollutants using photocatalytic activity. In this study, we have introduced a novel method to design highly photoreactive flexible 3 dimensional (3D) ZnO nanocomposite [F-ZnO-m (m: reaction time, min)] by electrospinning and simple-step ZnO growth processing (one-step ZnO seed coating/growth processing). Significantly, the F-ZnO-m could be a new platform (or candidate) as a photocatalytic technology for both morphology control and large-area production. The highest photocatalytic degradation rate ([k]) was observed for F-ZnO-m at 2.552 h-1, which was 8.1 times higher than that of ZnO nanoparticles (NPs; [k] = 0.316 h-1). The enhanced photocatalytic activity of F-ZnO-m may be attributed to factors such as large surface area. The F-ZnO-m is highly recyclable and retained 98.6% of the initial decolorization rate after fifteen cycles. Interestingly, the F-ZnO-m samples show very strong antibacterial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) after exposure to UV-light for 30 min. The antibacterial properties of F-ZnO-m samples are more effective than those of ZnO NPs. More than 96.6% of the E. coli is sterilized after ten cycles. These results indicate that F-ZnO-m samples might have utility in several promising applications such as highly efficient water/air treatment and inactivation of pathogenic microorganisms.

• The korean journal of orthodontics
• /
• v.39 no.3
• /
• pp.177-184
• /
• 2009

Objective: The aim of this study was to investigate the occurrence rate of bacteremia following toothbrushing with toothpastes composed of several antibacterial agents and compare the results with the conventional oral hygiene maintaining methods in orthodontic patients. Methods: This clinical study included 100 adult orthodontic patients who were divided into 4 groups. Each group comprised of 25 patients, wearing fixed orthodontic appliances. In the first group, bacteremia was assessed after toothbrushing without using any toothpaste. In the second group, a 0.2% chlorhexidine gluconate mouthrinse was used before brushing with no toothpaste. In the third group, subjects brushed with a commonly used toothpaste which did not include an additional antimicrobial agent. The fourth experimental group used toothpaste which included tea tree oil, clove oil, peppermint oil and bisabolol as antimicrobial elements. Pre- and post-brushing blood samples were obtained using a strict aseptic technique. All samples were microbiologically evaluated using blood culture bottles. Results: Toothbrushing in orthodontic patients yielded to an increase in the occurrence rate of bacteremia when using normal toothpaste or no toothpaste at all. Conclusions: The use of chlorhexidine mouthwash before toothbrushing, and brushing with antimicrobial toothpaste did not show a statistically significant difference in preventing the occurrence of bacteremia (p > 0.05).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.270.1-270.1
• /
• 2013

Zinc oxide (ZnO) is one of the most powerful materials for purifying organic pollutants using photocatalytic activity. In this study, we have introduced a novel method to design highly photoreactive flexible 3 dimensional (3D) ZnO nanocomposite [F-ZnO-m (m: reaction time, min)] by electrospinning and simple-step ZnO growth processing (one-step ZnO seed coating/growth processing). Significantly, the F-ZnO-m could be a new platform (or candidate) as a photocatalytic technology for both morphology control and largearea production. The highest photocatalytic degradation rate ([k]) was observed for F-ZnO-m at 2.552 h-1, which was 8.1 times higher than that of ZnO nanoparticles (NPs; [k] = 0.316 h-1). The enhanced photocatalytic activity of F-ZnO-m may be attributed to factors such as large surface area. The F-ZnO-m is highly recyclable and retained 98.6% of the initial decolorization rate after fifteen cycles. Interestingly, the F-ZnO-m samples show very strong antibacterial properties against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) after exposure to UV-light for 30 min. The antibacterial properties of F-ZnO-m samples are more effective than those of ZnO NPs. More than 96.6% of the E. coli is sterilized after ten cycles. These results indicate that F-ZnO-m samples might have utility in several promising applications such as highly efficient water/air treatment and inactivation of pathogenic microorganisms.

• KSBB Journal
• /
• v.20 no.2 s.91
• /
• pp.76-83
• /
• 2005

Lactic acid bacteria were isolated from pig feces for probiotics. The six isolated strains were identified as Lactobacillus paracasei (Lp), Lactobacillus fermentum (Lf), Lactobacillus brevis (Lb), Lactobacillus plantarum (P1 , P2), and Pediococcus pentosaceus (P3) by its sugar utilization, morphological and physiological characteristics. Pl was showed largest antibacterial inhibition zone among the isolated strains. It was against Salmonella gallinarum 25mm, E. coli 20.5mm, Staphylococcus aures 24mm, and Pseudomonas aeruginosa 28mm by inhibitory zone, respectively. Lf was showed hyper acid tolerance, $80\%$ survival rate for 40 minutes, and P1, Lb showed hyper bile tolerance, $408\%,\;283\%$ survival rate for 9 hrs, respectively. Therefore the Lf, P1, and P2 strains were expected to probiotics.

• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.96-104
• /
• 2015

This study examined the pretreatment effect, appropriate dyeing conditions, color fastness and functionality of cotton fabrics dyed with Zizania latifolia Turcz. Dye uptake was substantially increased by pretreatment and chitosan pretreatment was much more effective than tannic acid pretreatment. Optimal dyeing conditions were colorant concentration of 100%, dyeing temperature of $100^{\circ}C$, dyeing time of 80 minutes and dyebath pH of 5.5. Color fastness of chitosan pretreatment and dyed cotton to washing, rubbing, perspiration and light was 4, 5, 3-4(acidic), 3(alkaline) and 3 respectively. Color fastness of tannic acid pretreatment and dyed cotton to washing, rubbing, perspiration and light was 4, 5, 3-4(acidic), 4-5(alkaline) and 4 respectively. Deodorization rates of ammonia(NH3) were 99.9% in both cases. UV protection rate were 98.3% of UV-A and 98.5% of UV-B in case of chitosan pretreatment. UV protection rate were 98.2% of UV-A and 98.5% of UV-B in case of tannic acid pretreatment. UV protection factor(UPF) was 50+ in both cases. Reduction rate of Staphyloccus aureus were 99.9% in both cases. Therefore Zizania latifolia Turcz. could be used a new functional colorant.