• 한국공간구조학회논문집
• /
• 제20권4호
• /
• pp.169-176
• /
• 2020

When an unexpected excessive seismic load is applied to the base isolation of arch structure, the seismic displacement of the base isolation may be very large beyond the limit displacement of base isolation. These excessive displacement of the base isolation causes a large displacement in the upper structure and large displacement of upper structure causes structural damage. Therefore, in order to limit the seismic displacement response of the base isolation, it is necessary to install an additional device such as an anti-uplift device to the base isolation. In this study, the installation direction of the base isolation and the control performance of the base isolation installed anti-uplift device were investigated. The installation direction of the base isolation of the arch structure is determined by considering the horizontal and vertical reaction forces of the arch structure. In addition, the separation distance of the anti-uplift device is determined in consideration of the design displacement of the base isolation and the displacement of the arch structure.

• 국제강구조저널
• /
• 제18권5호
• /
• pp.1801-1817
• /
• 2018

This paper presents the numerical parametric analysis on the loading capacity of Channel purlins with screw-fastened sheeting, in which the effects of anti-sag bar and corrugated steel sheet on the ultimate capacity are studied. Results show that the setup of anti-sag bars can reduce the deformations and improve the ultimate capacity of C purlins. The traditional method of setting the anti-sag bars in the middle of the web is favorable. The changing of sheeting type, sheeting thickness and rib spacing has significant effects on the ultimate capacity of C purlins without anti-sag bars, compared with those with anti-sag bars. The proposed design formulas are relatively consistent with the calculations of EN 1993-1-3:2006, which is different from those of GB 50018-2002.

• 한국해양공학회지
• /
• 제37권5호
• /
• pp.215-224
• /
• 2023

While melting glaciers due to global warming have facilitated the development of polar routes, Arctic vessels require reliable anti-icing methods to prevent hull icing. Currently, the existing anti-icing method, i.e., the heating coil method, has disadvantages, such as disconnection and power inefficiency. Therefore, a carbon nanotube-based surface heating element method was developed to address these limitations. In this study, the numerical analysis of the surface heating element method was performed using ANSYS. The numerical analysis included conjugate heat transfer and computational fluid dynamics to consider the conduction solids and the effects of wind speed and temperature in cold environments. The numerical analysis method of the surface heating element method was validated by comparing the experimental results of the heating coil method with the numerical analysis results (under the -30 ℃ conditions). The surface heating element method demonstrated significantly higher efficiency, ranging from 56.65-80.17%, depending on the conditions compared to the heating coil method. Moreover, even under extreme environmental conditions (-45 ℃), the surface heating element method satisfied anti-icing requirements. The surface heating element method is more efficient and economical than the heating coil method. However, proper heat flux calculation for environmental conditions is required to prevent excessive design.

• 한국전자파학회논문지
• /
• 제19권7호
• /
• pp.761-770
• /
• 2008

임피던스 인버터 및 어드미턴스 인버터는 마이크로파 여파기 설계에 자주 사용되는 개념적인 소자이다. 본 논문에서는 일반적 무 손실 2-포트 회로의 인버터를 사용한 등가회로를 제시하였다 이 방법은 기존의 방법과 달리 무손실 2-포트 회로의 z- 또는 y-파라미터를 알 경우, 이를 이용하여 용이하게 나타낼 수 있다. 이 방법을 평행 결합 선로(parallel coupled line) 및 비평행 결한 선로(anti-parallel coupled line)에 적용하고, 기존의 등가회로에 대하여 비교 검토하였다. 또한, 마이크로스트립 평행 결합 선로 여파기는 설계된 여파기에 대해 주파수 응답의 왜곡을 발생시키게 되는데, 이를 보상하기 위하여 알려진 기존 결과들과 본 논문의 유도 결과를 비교 검토하였다. 평행 결합 선로 여파기 설계시 제시된 등가회로는 기존 등가회로와의 차이로 여파기 설계에 특이성을 보이게 된다. 본 논문에서는 제시된 등가회로에 대하여 설계 방법을 제시하고, 기존의 연구 결과와 비교하여 제시된 방법이 보다 정확한 결과를 주는 것을 보였다.

• 한국의상디자인학회지
• /
• 제7권2호
• /
• pp.101-110
• /
• 2005

Vivienne Westwood could be placed in a unique position in the contemporary fashion design. She has never belonged in a core group of mainstream fashion designer but not been always in an outsider position. She got from mainstream fashion designer circles enormous appreciation, even established fashion industry was influenced by her fashion design. She began her fashion design with rebellious T-shirts like 'destroy' T-shirt, chicken-bone T-shirt, and nipple-zipper T-shirt, all of which revealed her disgust against establishment. All these T-shirts testify her total negation tendency in her youth. However, she did not continue to keep such a kind of total negation attitude against establishment In 1980s she changed her political attitude towards establishment, and this change also found a reflection in her fashion design. In her pirate-collection the dark image of her fashion in the 1970s changed into a totally different bright image with full of gold colour. Although this collection had radiated brightness, it contained still outsider character from mainstream fashion design. The following fashion design in 1980s and 1990s evolved further on the line of Pirate-collection, but they continued to contain certain outsider characteristics. Vivienne Westwood kept some kind of anti-establishment attitude, and this attitude more or little came to the surface of her design. She was always political and critical to the establishment. In 2005, in her 64, she designed a liberty T-shirt, which showed her political attitude and her engagement in social issues. Also it showed the change from the early total negation to the constructive critical affirmation. In this paper the relation between the fashion design of Vivienne Westwood and her political attitude and the influence of her political attitude to her fashion design is analyzed.

• 대한화학회지
• /
• 제55권5호
• /
• pp.830-834
• /
• 2011

This paper is on the industrial synthesis process of anti-oxidant RD ((2,2,4-trimethyl-1,2-dihydroquinoline polymer $(C_{12}H_{15}N)_n$. n=2-4)).The content of dimer, trimer and tetramer of RD as the inspection targets, using the orthogonal design method - take the ratios of keto-amine, the reaction time, the reaction temperatures and the ratios of catalyst acid-amine as inspect factors - to optimized the reaction condition. The results indicate that the best ratio of keto-amine is 2:1, the time of salification and condensation is 3 hours and 7.5 hours. The range of temperature of salification and condensation is $135^{\circ}C$ and $120-125^{\circ}C$, and that the best ratio of acid-amine is 0.2: 1 (the proportion is the concentration ratio for mole). Under the optimization conditions, the yield of RD was stabilized and content of RD more than 45%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권7호
• /
• pp.1624-1637
• /
• 2013

In RFID systems, one important issue is how to effectively address tag collision, which occurs when multiple tags reply simultaneously to a reader, so that all the tags are correctly identified. However, most existing anti-collision protocols assume isotropic collisions where a reader cannot detect any of the tags from the collided signals. In practice, this assumption turns out to be too pessimistic since the capture effect may take place, in which the reader considers the strongest signal as a successful transmission and the others as interference. In this case, the reader disregards the other collided tags, and in turn, fails to read the tag(s) with weaker signal(s). In this paper, we propose a capture effect-aware anti-collision protocol, called Multi-Round Collision Tree (MRCT) protocol, which efficiently identifies the tags in real RFID environments. MRCT deals with the capture effect as well as channel error by employing a multi-round based identification algorithm. We also analyze the performance of MRCT in terms of the number of slots required for identifying all tags. The simulation results show that MRCT significantly outperforms the existing protocol especially in a practical environment where the capture effect occurs.

• 대한조선학회논문집
• /
• 제54권1호
• /
• pp.71-81
• /
• 2017

In this study, a series of full-scale extrapolation procedures based on the Granville's similarity scaling method, which was employed by Schultz (2007), is modified and then applied to compare the resistance performance between two different anti-fouling coatings. As an analysis example, the low frictional AF coating based on a novel skin-friction reducing polymer named FDR-SPC (Frictional Drag Reduction Self-Polishing Copolymer), which had been invented by the present author, is employed. The low frictional coating, which gives 25.4% skin frictional reduction in lab test, is estimated to give 18.2% total resistance reduction for a 176k DWT bulk carrier.

• Structural Engineering and Mechanics
• /
• 제63권2호
• /
• pp.195-206
• /
• 2017

This paper presents the parametric numerical analysis on the ultimate bearing capacity of the purlin-sheet roofs connected by standing seam clips. The effects of several factors on failure modes and ultimate bearing capacity of the purlins are studied, including setup of anti-sag bar, purlin type, sheet thickness and connection type et al. A simplified design formula is proposed for predicting the ultimate bearing capacity of purlins. Results show that setting the anti-sag bars can improve the ultimate bearing capacity and change the failure modes of C purlins significantly. The failure modes and ultimate bearing capacity of C purlins are significantly different from those of Z purlins, in the purlin-sheet roof connected by standing seam clips. Setting the anti-sag bars near the lower flange is more favorable for increasing the ultimate bearing capacity of purlins. The ultimate bearing capacity of C purlins increases slightly with sheet thickness increasing from 0.6 mm to 0.8 mm. The ultimate bearing capacity of the purlin-sheet roofs connected by standing seam clips is always higher than those by self-drilling screws. The predictions of the proposed design formulas are relatively in good agreement with those of EN 1993-1-3: 2006, compared with GB 50018-2002.

• 한국정밀공학회지
• /
• 제28권10호
• /
• pp.1166-1173
• /
• 2011

There have been many researches about SUGV (Small Unmanned Ground Vehicle) mechanism regarding off-road mobility and obstacle negotiation. This paper introduces an analysis of geometry parameters to enhance the vertical obstacle negotiation ability for the SUGV. Moreover, this paper proposes an anti-shock structure analysis of wheels to protect the main body of the SUGV when it falls off a vertical obstacle. Major system geometry parameters will be determined under certain constraints. The constraints and optimization problem for maximizing the ability of vertical obstacle negotiation will be presented and discussed. Dynamic simulation results and experiments with manufactured platform will also be presented to validate the analysis. Several types of wheel materials and structures will be compared to determine the best anti-shock wheel design through FEM (Finite Element Method) simulations.