• 전기학회논문지P
• /
• 제66권2호
• /
• pp.94-97
• /
• 2017

A method of improving the anti-fouling characteristics of porcelain insulators was proposed in this study. Functional coating was performed as a method of reducing the surface contamination of the porcelain insulators. The functional coating was applied on a ceramic substrate, which has the same material as the porcelain insulators. After coating the ceramic substrate 2, 3, 4, and 5 times alternately in the horizontal and vertical directions, the surface characteristics according to the thickness of the coating film were analyzed. The optimal process was selected to coat the surfaces of the post insulators and long rod insulators, which are the representative porcelain insulators. After coating, heat treatment was performed for 1 hour at $200^{\circ}C$ in a furnace to secure the durability of the coating film. Compared to the uncoated insulators, the insulators with the functional coating showed significantly improved anti-fouling characteristics as well as excellent adhesion to the coated insulator surface.

• Transactions on Electrical and Electronic Materials
• /
• 제18권3호
• /
• pp.148-150
• /
• 2017

For the improvement of the anti-fouling features of porcelain electrical insulators, in this study, the surface of an insulator was coated with a functional material to expand the insulator's self-cleanness. The anti-fouling and mechanical features of the functional film coating of ceramic substrates made from components like an electrical insulator were analyzed. The coating methods that were used were spray coating, dip coating, and fabric coating. Following the coating, the contact angle of the coated surface was measured, revealing that the spray coating method offered the lowest angle ($13.7^{\circ}$) and a strong hydrophilic feature. The anti-fouling analysis showed that the anti-fouling features improved as the contact angle decreased. The mechanical properties - hardness and adhesion - were both excellent at 9H and 5B, respectively, regardless of the coating method that was used.

• 풍력에너지저널
• /
• 제15권1호
• /
• pp.82-90
• /
• 2024

Bio-fouling has positive aspects that are used as a fish resource, but there are also negative aspects such as corrosion of the surface of the support structure, aesthetics and work safety problems. A specimen was produced using a polyurea material with excellent anti-fouling and methodology, and contact angle, high water pressure, adhesion, and real sea area tests were performed. As a result of measuring the contact angle of the specimen with a 10 cm x 10 cm area of polyurea, There was found to be an average of 124.4 ° at nine points. No surface damage was found even above 5 Mpa when high water pressure was sprayed, and adhesive strength of 300LSE adhesives was confirmed between 22.84 and 23.04 Mpa with an adhesion test. During the 6-month real sea area test, it was confirmed that about 17.24 % of the polyurea film was less generated than the comparison group.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.886-890
• /
• 2010

The polytetrafluoroethylene (PTFE) films are deposited on glass using conventional rf-magnetron sputtering method. Their hydrophobic properties are investigated for application as an anti-fouling coating layer on the screen of displays. It is found that the hydrophobicity of PTFE films largely depends on the sputtering conditions, such as Ar gas flow and deposition time during sputtering process. These conditions are closely related to the deposition rate or thickness of PTFE film. Thus, it is also found that the deposition rate or the film thickness affects sensitively the geometrical morphology formed on surface of the rf-spluttered PTFE films. In particular, the PTFE film with 1950 nm thickness deposited for 30 minute at rf-power 50 W shows a very excellent optical transmittance of over 90% and a good anti-fouling property and a good durability.

• 한국전기전자재료학회논문지
• /
• 제27권8호
• /
• pp.516-521
• /
• 2014

An excellent hydrophobic surface has a high contact angle over 147 degree and the contact angle hysteresis below $5^0$ was produced by using roughness combined with hydrophobic PTFE coatings, which were also confirmed to exhibit an extreme adhesion to glass substrate. To form the rough surface, the glass was etched by Ar-plasma. A very thin PTFE film was coated on the plasma etched glass surface. Roughness factors before or after PTFE coating on the plasma etched glass surface, based on Wensel's model were calculated, which agrees well with the dependence of the contact angle on the roughness factor is predicted by Wensel's model. The PTFE films deposited on glass by using a conventional rf-magnetron sputtering. The glass substrates were etched Ar-plasma prior to the deposition of PTFE. Their hydrophobicities are investigated for application as a anti-fouling coating layer on the screen of displays. It is found that the hydrophobicity of PTFE films mainly depends on the sputtering conditions, such as rf-power, Ar gas content introduced during deposition. These conditions are closely related to the deposition rate or thickness of PTFE film. Thus, it is also found that the deposition rate or the film thickness affects sensitively the geometrical morphology formed on surface of the rf-sputtered PTFE films. In particular, 1,950-nm-thick PTFE films deposited for 30 minute by rf-power 50 watt under Ar gas content of 20 sccm shows a very excellent optical transmittance and a good anti-fouling property and a good durability.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.144-150
• /
• 2005

The size of ship is being larger than the past in the shipping industry thanks to the increased quantity of goods transported by ship. Therefore, HHIC (Hanjin Heavy industries & Construction co., LTD) invented innovative construction method, so called 'DAM', to build a ship which is longer than the length of the HHIC's dry dock. On Erection at the sea by the application of DAM Method, Squeezing & Detachment of A/F film may occur as a result of the wave and the constriction between A/F film pre-applied on the side shell and DAM's Rubber Packing. Thus, the test for finding the minimum curing time of A/F film was performed to protect Squeezing & Detachment of A/F film on the hull. To verify the soundness of paint and to find the optimum condition during the erection period of the DAM, laboratory test was carried out under no immersion condition through the application of various coatings on the Rubber Packing. And two methods were selected from the results of laboratory test for actual MOCK-UP Test. In addition, the test for the film profile per temperature of silicone A/F coat and the film Squeezing was performed.

• Membrane and Water Treatment
• /
• 제9권4호
• /
• pp.211-220
• /
• 2018

Incorporating nano-materials in thin-film composite (TFC) membranes has been considered to be an approach to achieve higher membrane performance in various water treatment processes. This study investigated the rejection efficiency of three target compounds, i.e., reserpine, norfloxacin and tetracycline hydrochloride, by TFC membranes with different graphene oxide proportions. Graphene oxide (GO) was incorporated into the polyamide active layer of a TFC membrane via an interfacial polymerization (IP) reaction. The TFC membranes were characterized with FTIR, FE-SEM, AFM; in addition, the water contact angle measurements as well as the permeation and separation performance were evaluated. The prepared GO-TFC membranes exhibited a much higher flux ($3.11{\pm}0.04L/m2{\cdot}h{\cdot}bar$) than the pristine TFC membranes ($2.12{\pm}0.05L/m2{\cdot}h{\cdot}bar$) without sacrificing their foulant rejection abilities. At the same time, the GO-modified membrane appeared to be less sensitive to pH changes than the pure TFC membrane. A significant improvement in the anti-fouling property of the membrane was observed, which was ascribed to the favorable change in the membrane's hydrophilicity, surface morphology and surface charge through the addition of an appropriate amount of GO. This study predominantly improved the understanding of the different PA/GO membranes and outlined improved industrial applications of such membranes in the future.

• 한국포장학회지
• /
• 제29권2호
• /
• pp.111-118
• /
• 2023

본 연구에서 연속형 레이저와 나노초 레이저의 경우에는 고분자와 물성 조건이 맞지 않아서, 고분자 필름 표면에 특정 패터닝이 구현되지 않았다. 그러나, 펨토초 레이저를 활용하여 HDPE, PP, PET 등의 식품포장 필름의 표면에 패터닝이 구현됨을 확인하였다. 따라서, 본 연구에서 식품포장 필름에서 펨토초 레이저 패터닝 공정 조건을 확립하였고, 싱글 펄스에 의한 대면적 원형 패턴, 싱글 펄스를 30%를 중첩한 대면적 거칠기 패턴, 직선 패턴, 직선 패터닝을 중첩한 대면적 거칠기 패턴, 직선 패터닝을 교차하여 격자 패턴 등의 표면 패터닝 필름을 제작하였다. 또한, 표면 패턴 구조와 크기에 따른 패터닝 HDPE, PP, PET 필름은 SEM, AFM, 접촉각 분석을 통하여 그 특성을 확인하였다. 펨토초 레이저 패터닝을 하지 않은 각 대조군 필름의 표면 대비 대면적 원형 패터닝 HDPE 및 PP 필름, 싱글 펄스를 30%를 중첩한 대면적 거칠기 패터닝 및 직선 패터닝을 중첩한 대면적 거칠기 패터닝 PET 필름의 표면은 27.1-37.5°의 접촉각을 나타냄으로써, 패터닝 후에 HDPE, PP, PET 필름은 친수성 표면으로 변화되었다. 반면, 나노-마이크로 크기의 돌기 표면구조를 갖고 있는 대면적 격자 패터닝 HDPE 필름의 경우에는 120.4°의 접촉각을 보임으로써, 패터닝 후에 소수성 표면으로 변화되었다. 따라서, 패터닝을 통해 친수성 표면으로 바뀐 필름들은 단백질, 세포, 바이러스 등을 비롯하여 식품의 물질들이 달라붙지 못하거나, 쉽게 떨어지는 엔티파울링 응용분야에 활용이 가능하다. 또한, 향후 좀더 정밀한 나노 및 마이크로 돌기 구조를 갖는 격자 패터닝을 통해 150° 이상의 초소수성 표면을 제작하게 된다면, 자가 청소(Self-cleaning) 등의 초소수성 표면 응용분야에 활용 가능할 것이다.

• 멤브레인
• /
• 제31권1호
• /
• pp.16-34
• /
• 2021

물 공급은 늘어나는 담수 수요와 다르게 줄어들고 있다. 담수의 수요를 충당하기 위해서 나노여과법은 가장 효율적이고 경제적인 방법이라고 할 수 있다. 해수담수화를 위한 나노여과법의 일반적인 방법으로는 나노여과 멤브레인을 이용한 역삼투압 방식이다. 하지만 기존의 멤브레인들은 주요 특성인 안정성, 경제성, 그리고 살균 및 방오특성이 부족하다. 기존의 나노여과 멤브레인을 향상시키기 위해서 친수성과 방오성이 높은 흑연 산화물이 가장 향상성이 높으며 널리 연구되고 있는 재료이다. 멤브레인 변형은 다른 레이어에 적용될 수 있다. 얇은 막으로 이루어진 멤브레인은 다른 세 레이어로 구성되어 있다, 표면의 폴리아미드 레이어, 기공 레이어, 그리고 전체적인 구조를 구성하는 지원 직물이다. 정삼투압 토한 에너지 효율적인 해수담수화 방식이지만 효율이 생물 오염 때문에 떨어진다. 산화그래핀 결합은 향균 기능을 향상할 수 있으며 멤브레인 표면에 바이오필름 생성을 억제할 수 있다. 압력지연삼투는 해수에서 청정에너지를 발전시키는 최고의 방법 중 하나이다. 멤브레인의 생물 오염은 합성 폴리머 멤브레인의 합성 레이어에 산화 그래핀을 합성하여 줄일 수 있다. 나노여과 멤브레인을 개량하는 여러 연구가 각자의 장단점을 가지고 이루어지고 있다. 이 보고서는 나노여과 멤브레인의 개량, 성질, 그리고 성능에 대해 논의한다.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.399-406
• /
• 2013

In the present study, the flat plate model test method is developed to evaluate the skin friction of the marine coating in the cavitation tunnel. Six-component force balance is used to measure the profile drag of the flat plate and strut. LDV(laser Doppler velocimetry) technique is also employed to evaluate the drag and to figure out the reason of the drag reduction. The flow velocities above the surface can be used to assess the skin friction, combined with direct force measurement. Since the vortical structure in the coherent turbulence structure influences on the skin friction in the high Reynolds number regime, the interaction between the turbulence structure and the surface wall is paying more attention. This sort of thing is important in the passive control of the turbulent boundary layer because the skin friction can't be determined only by wall condition. As complicated flow phenomena exist around a paint film, systematic measurement and analysis are necessary to evaluate the skin friction appropriately.