• Journal of the Korean Society of Costume
• /
• v.56 no.4 s.103
• /
• pp.15-32
• /
• 2006

The purpose of this study is to research on the actual condition of production and selling in silver apparel market. For the questionnaire, 19 women's wear brands which were in higher ranking of sales in boutiques and madame-zone of department stores were selected. Pattern makers of each brand were questioned about 40 items for this research. The results of the questionnaire were as follows: 1) According to the result of the survey on the made-to-wear production of 19 ready-to-wear manufacturers, there was the gap was in ages between the target and the real consumer. Consumers of these brands were older and aged more broadly than their target ages. 2) Most of the consumers of silver-zone has thick waists, common heights, fat shapes. Custom-made clothes are ordered in many cases because of the big abdomen(50.0%) and H-shape(58.3%) of a somatotype. The body size variation of user population is needed for a good fit. 3) All brands(100%) of this research are using KS standards in the label of clothing, but they don't use these data in their production by reason of unawareness and distrust about these data. These inconsistency between the label and the real size of products may cause a confusion when consumers buy ready-to-wear. 4) Silver apparel manufacturers have need of anthropometry information and dummy(78.6%) suitable for their target consumers to increase their satisfaction about their apparel fit.

• Korean Journal of Community Nutrition
• /
• v.3 no.2
• /
• pp.190-201
• /
• 1998

This study was carried out with 505(243 boys and 262 girls in the Sungnam area) high school students to investigate the effects of eating behavior and anthropometric variables of weight and height on excercise performance. General characteristics about subjects and eating behavior were surveyed by questionnaire, anthropometric data were collected using two methods. The weight and height of subjects in 1996 were measured, but the same data in 1995 were collected from health records of each student. Body fat content of subjects was measured by BIA(Body Impedance Analysis). The grades of exercise performance, which were evaluated by physical education teachers were collected from records of a physical strength test score of each subject. From these, the following result were found. Groups with different eating behaviors such as skipping meals, overeating, food preference for a specific food(milk, carbonated drink etc.) were significantly different in their weight and height and body fat contents. The growth rate of height in first and second grade boys was significantly higher than that for grade boys. The amount of weight gain from second grade to third grade was significantly more than that of other grades both for boys and girls. The mean of BMI was $21.66\pm{2.95}$ in boy, $21.50\pm{2.62}$ in girls. The percentage of body fat was $24.91\pm{6.55%}$ in boy $34.73\pm{4.88%}$ in girls. Amounts of body fat were significantly increased in third grade. The group with higher fat content and the higher BMI group had lower values of physical strength. And the ability to exercises perform decreased significantly by promotion of grade. The other variables such as degree of concern about weight control and preference of exercise, and frequencies of exercise per week were significant factors in body fat content and physical strength. As a countermeasure for these problems, nutrition and health education must be developed for adolescents and a practical, proper physical activity guidance campaign for them is necessary.

• Journal of Nutrition and Health
• /
• v.37 no.2
• /
• pp.132-142
• /
• 2004

Nutritional factors affecting bone mineral density (BMD) in the different age groups of Korean men were investigated to obtain baseline data for maintaining bone health. Information on diet and anthropometry was collected in 80 elementary school children, 83 high school students, 87 adults aged 25 to 35 years and 98 elderly people over 60 years of age. Data for food and nutrient intake were obtained by 24-hour recall method. BMDs of lumbar spine (L$_2$- L$_4$) and femoral neck were measured by dual energy x-ray absorptiometry. The relationship between BMD and nutritional factors were analyzed. In the femoral neck, 5.7% of adults was classified as osteopenia and 47.9% and 37.8% of the elderly were classified as osteopenia and osteoporosis. It was shown that plant protein, Ca, p, Fe, thiamin, riboflavin and vitamin C intakes were related with BMD in all age groups. As for the mean adequacy ratio (MAR) of nutrients, the lowest quartile group of BMD showed significantly lower MAR among children. The RDA percent of nutrients was a strong influential factor on BMD. Subjects who consumed below 75% of Korean RDA in energy, vitamin A, thiamin, and vitamin C showed lower BMD. Stepwise multiple regression analysis revealed that MAR in children, vegetable Ca in adolescents, and vitamin C in adults and elderly people were the highest influential factor on BMD. Therefore, the above results demonstrated that not only calcium but also other nutrients such as protein, iron, vitamin A, riboflavin, and vitamin C were necessary in order to keep the healthy bone status. In addition, although there were various dietary factors that influenced bone density, MAR was identified as the major factor that affected bone density. Thus, a balanced diet that includes all nutrients is necessary for a healthy bone density. (Korean J Nutrition 37(2) : 132-142, 2004)

• Fashion & Textile Research Journal
• /
• v.11 no.2
• /
• pp.286-292
• /
• 2009

The purpose of this study is to analyze the pattern of the present flight suit, to select variables of human body and key dimensions for making pattern of the flight suit, and to decide the most appropriate size of human body and rate of ease for designing an overall flight suit. For analyzing the pattern of flight suit, we used "M95Special" (men ; chest circumference 92-97 cm ; height : above 177 cm), which was indicated as the standard of the Ministry of National Defense. We analyzed general appearance and the actual dimensions of the pattern of the flight suit. As a result of analyzing the pattern, flight suit was front-opened overall style which had a flat collar with rounded edges, two-pieced sleeves with lower height of the sleeve's cap, 3cm-width belt on the waist and 8 pockets. To decide the most appropriate size of human body, we selected 20 variables of human body in the 359 variables of the Size Korea by referring the previous studies. The 20 variables of human body were 9 circumferences (chest, waist, hip, neck, armscye, wrist, thigh, knee, and ankle), 9 lengths (stature, back interscye fold, waist back, crotch height, crotch, body rise, arm, outside leg and total), and 2 breadths (biacromial and chest). We drew out the size of 20 variables from the Size Korea and US Army anthropometry data and decided the most appropriate values from the drawn data for applying to the pattern of flight suit.

• The Research Journal of the Costume Culture
• /
• v.25 no.5
• /
• pp.670-681
• /
• 2017

Firefighting hoods protect the head, face, and neck areas of officials while they perform firefighting services. The purpose of this study is to investigate the head size of Korean firefighting officials in order to establish the dimensions necessary to construct firefighting hoods. A total of 98 male firefighting officials participated in this study and 11 body dimensions, necessary for the construction of firefighting hoods, were measured. The data collected from the firefighting officials were compared to the general adult male data from the Size Korea national anthropometric study. The heights, weights, head circumferences, head heights, and bitragion arcs of the firefighters were significantly larger than those of general adult males, which shows that firefighting officials generally have larger body and head sizes than general adult males. Based on the results of Pearson's correlation coefficients, head circumference and head height were judged to be the important measurements for the construction of the firefighting hoods. Thus, these two measurements were chosen as the basic dimensions of the cross tabulation analysis. As a result, head circumferences of 57.00~60.99cm and head heights of 23.00~25.99 cm were found to be important measurement ranges among the firefighters. This study is expected to be used as the basis for the creation of firefighting hoods that help to ensure the safe rescue activities for firefighting officials.

• Fashion & Textile Research Journal
• /
• v.12 no.5
• /
• pp.642-649
• /
• 2010

This study was designed to generate briefs pattern for women in their twenties using 3D parametric body model. 151 women in their 20's were random sampled and measured using Martine's anthropometry. And one subject was chosen as the representative subject for 3D scanning. Parametric model was generated of using CATIA P3, Unigraphics NX4.0, Rapidform 2006. And the 3D surface of parametric body model was flattened onto the 2D plane. 3 downscale ratios(0%, 10%, 15%) were applied to generated pattern to figure out what downscale ratio was suitable to make briefs with stretch fabric. 4 kinds of experimental briefs were made with stretch fabrics(0%, 10%, 15% downscale) and worn on the dressform. Subjective evaluation on the appearance was done and the data was analyzed by ANOVA with post-hoc test. Briefs pattern was generated through the process of flattening the parametric surface and arranging the patches to make briefs pattern by dart manipulation. The different ration of outline and area between 3D surface and 2D pattern were 0.22% and 0.09% respectively. It showed that a parametric model could provide a desirable pattern with minute size error. The results of subjective evaluation on the appearance of 4 experimental briefs showed that stretch briefs with 15% downscale ratio was evaluated most highly in most items. Findings imply that it is feasible to apply 3D parametric model to generate patterns for various items considering various fabric properties.

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.461-464
• /
• 2008

Purpose: Although the demand for the mammoplasty including reduction or reconstruction is remarkably increasing, the anthropometric measurement for the breast, especially about the nipple areola complex(NAC) of Korean women has not been reported recently. Therefore, the anthropometric measurement about the NAC was performed to suggest the standard size of NAC for Korean women. Methods: Two hundred and twenty five female volunteers in 20's through 50's were included for the study. Questionnaires including the diameter of NAC, the diameter, height of nipple, age, marital status, delivery and lactation history were distributed to the volunteers and collected. Results: The mean values of our study are as follows: the areola diameter is $30.93{\pm}10.07mm$, the nipple diameter is $10.21{\pm}4.14mm$ and the height of nipple is $6.54{\pm}3.74mm$. The diameter of nipple areola complex(NAC) is bigger in old ages. If the volunteers have the history of marriage, delivery and lactation, it is bigger, as well. The height of nipple closely related to individual characters except the correlation between height of nipple and age. Conclusion: It is important to have standard data for the nipple areola complex in order to have good aesthetic results of mammoplasty. Despite the importance, there are a few measurement data for the nipple areola complex(NAC) of Korean women. The result of our study is not the absolute parameter for breast surgery, however it can be used as the standard size for NAC in the Korean female during breast surgery.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.1
• /
• pp.39-50
• /
• 2013

This study estimates the measurements required to make garments but omitted from Size Korea 2010. Before the estimation of the measurements, the differences of the measurement methods were reviewed through previous research related to clothing construction and various measurement protocols that include previous Size Korea 2010 projects and ISO. The research target was 308 females aged 20 to 30 who lived in Seoul and the surrounding Gyeonggi province. A total of 43 measurements were obtained by the direct measurement method and analyzed in this study. In addition, 17 measurements which differ from the measurement method were also measured directly. These 17 measurements items were waist height, waist back height, waist height natural indentation, body rise, rise length, waist back length 1 & 2, posterior shoulder length 1 & 2, arm length 1 & 2, upper arm circumference 1 & 2, elbow circumference 1 & 2, and waist circumference 1 & 2. To analyze the differences in measurements, the subjects were divided into 2 age groups (20's and 30's). The results were as follows: First, there were big differences in stature, waist height, shoulder length, total length, and neck shoulder point to breast points by age groups; however, there were no differences in 17 measurement (such as shoulder angles) by age groups. Second, it was determined that 'waist circumference 1 & 2', 'waist back length 1 & 2', 'arm length 1 & 2', 'elbow circumference 1 & 2', 'upper arm circumference 1 & 2' and 'body rise & rise length' had significant differences by measurement methods in the entire group as well as each age group. Third, the values of 8 measurements omitted from Size Korea 2010 were estimated using similar measurements. The results of the correlation analysis were utilized to select reasonable independent measurements. Finally, 10 regression equations were obtained by regression analysis; subsequently, these will be useful for estimation of omitted measurements in Size Korea 2010.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.193-198
• /
• 2018

These days, computer system has been introduced for work in most areas, including manufacturing, medical service, education, logistics, and other services. To increase work efficiency, mobile system has been more applied. However, on the basis of Android applications, it is hard for laypersons who have no enough knowledge of Android, or computer team members in general firms to develop mobile App. As a result, work efficiency comes to low. Therefore, this study designed and developed the mobile application for anthropometry data input of medical checkup with the use of App Inventor. As shown in the designed and developed mobile application, it is expected to develop a work process mobile App, it is expected to develop a work process mobile App easily and quickly with the use of App Inventor and to increase work efficiency even though there is not much knowledge of mobile application development.

• The korean journal of orthodontics
• /
• v.45 no.3
• /
• pp.105-112
• /
• 2015

Objective: A recently developed facial scanning method uses three-dimensional (3D) surface imaging with a light-emitting diode. Such scanning enables surface data to be captured in high-resolution color and at relatively fast speeds. The purpose of this study was to evaluate the accuracy and precision of 3D images obtained using the Morpheus 3D$^{(R)}$ scanner (Morpheus Co., Seoul, Korea). Methods: The sample comprised 30 subjects aged 24.34 years (mean $29.0{\pm}2.5$ years). To test the correlation between direct and 3D image measurements, 21 landmarks were labeled on the face of each subject. Sixteen direct measurements were obtained twice using digital calipers; the same measurements were then made on two sets of 3D facial images. The mean values of measurements obtained from both methods were compared. To investigate the precision, a comparison was made between two sets of measurements taken with each method. Results: When comparing the variables from both methods, five of the 16 possible anthropometric variables were found to be significantly different. However, in 12 of the 16 cases, the mean difference was under 1 mm. The average value of the differences for all variables was 0.75 mm. Precision was high in both methods, with error magnitudes under 0.5 mm. Conclusions: 3D scanning images have high levels of precision and fairly good congruence with traditional anthropometry methods, with mean differences of less than 1 mm. 3D surface imaging using the Morpheus 3D$^{(R)}$ scanner is therefore a clinically acceptable method of recording facial integumental data.