• Journal of the Korea Furniture Society
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2018

A study was carried out to observe the 1% aqueous safranine solution flow speed in longitudinal and radial directions of softwood Metasequoia glyptostroboides, diffuse-porous wood Anthocephalus cadamba and ring-porouswood Fraxinus rhynchophylla. In radial direction, ray cells and in longitudinal direction, tracheids, vessel and wood fiber were considered for the measurement of liquid penetration speed at less than 12% moisture contents (MC). The length, lumen diameter, pit diameter, end wall pit diameter and the numbers of end wall pits determined for the flow rate. The liquid flow in the those cells was captured via video and the capillary flow rate in the ones were measured. Vessel in hardwood species and tracheids in softwood was found to facilitate prime role in longitudinal penetration. Anatomical features like the length and diameter, end-wall pit numbers of ray parenchyma were found also responsible fluid flow differences. On the other hand, vessel and fiber structure affected the longitudinal flow of liquids. Therefore, the average liquid penetration depth in longitudinal tracheids of Metasequoia glyptostroboides was found the highest among all cells considered in Anthocephalus cadamba and Fraxinus rhynchophylla In radial direction, ray parenchyma of Metasequoia glyptostroboides was found the highest depth and the one of Fraxinus rhynchophylla was the lowest. The solution was penetrated lowest depth in the wood fiber of Fraxinus rhynchophylla. The large vessel of Fraxinus rhynchophylla was found the lowest depth among the vessels. The solutin was penetrated to the wood fiber of Anthocephalus cadamba higher than the one of Fraxinus rhynchophylla.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.2
• /
• pp.143-148
• /
• 2018

The aim of this research was to determine the physical and mechanical properties of glued laminated lumber (glulam) made from jabon (Anthocephalus cadamba) and pine (Pinus merkusii). Three layers of lamina from each wood species were bonded using isocyanate adhesive with a glue spread of $280g{\cdot}m^{-2}$ and then pressed using cold press with a specific pressure of 1.47 MPa. Samples had dimensions of $3cm{\times}6cm{\times}100cm$ (thickness, width, and length, respectively). Glulam properties were tested based on Japanese Agricultural Standard (JAS) 234-2003. The results showed that the density of glulam was $0.36g{\cdot}m^{-3}$ for jabon and $0.73g{\cdot}m^{-3}$ for pine. The moisture content of all glulams fulfilled the JAS standard. The mechanical properties of pine glulam fulfilled the JAS standard in all tests, whereas jabon glulam fulfilled the standard in the modulus of rupture and shear tests.

• Advances in Traditional Medicine
• /
• v.9 no.4
• /
• pp.326-334
• /
• 2009

The effect of alcoholic extract of Anthocephalus (A.) Cadamba Roxb. was evaluated in experimental models of pain and ulcer. Hot tail flick test, hot plate test and acetic acid induced writhing test were employed for evaluating the peripheral as well as central analgesic mechanism exerted by the extracts. Gastroprotective activity was examined by HCl and ethanol induced gastric damage test. Test group received crude extract 500 mg/kg showed maximum time needed for the response against thermal stimuli (6.26 ${\pm}$ 0.439 s) which is comparable to diclofenac sodium (6.56 ${\pm}$ 0.381 s) in hot tail flick method. These experimental results also followed the experimental results of hot plate test where crude extract 500 mg/kg showed maximum time needed for the response against thermal stimuli (4.74 ${\pm}$ 0.234 s) which is comparable to diclofenac sodium (5.58 ${\pm}$ 0.585 s). The crude extract at 500 and 250 mg/kg showed significant reduction in acetic acid induced writhing in mice with a maximum effect of 68.026% reduction at 500 mg/kg dose which is comparable to standard diclofenac sodium (79.93%). In gastroprotective study the extract of A. Cadamba (250 and 500 mg/kg) significantly inhibited ulceration induced by both HCl and ethanol dose dependently. Results of the study suggest that the extract possesses both analgesic and gastroprotective activity on mice.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.4
• /
• pp.451-458
• /
• 2019

Jabon (Anthocephalus cadamba Miq.) is a fast-growing species that exhibits a lower natural resistance than that exhibited by the timber sourced from natural forests. Jabon's resistance to termite attack can be improved by impregnating its wood structure with poisonous organic materials. This study examined jabon's resistance to termite attack when impregnated with wood vinegar and an animal adhesive. The wood specimens were impregnated using sengon wood vinegar and an animal adhesive (8% and 10%, respectively) using a vacuum pressure machine. The specimens were tested for their resistance to subterranean and dry-wood termites according to Indonesian National Standard (SNI 7207-2014). The results denoted that jabon impregnated with wood vinegar and an animal adhesive concentration of at least 8% with the addition of 4% borate was effective to resist termite attacks. The impregnated jabon exhibited a lower weight loss and higher termite mortality when compared with those exhibited by the control specimens. Thus, the resistance class improved from class IV to class I.

• Journal of Forest and Environmental Science
• /
• v.25 no.2
• /
• pp.111-118
• /
• 2009

Multiple shoot induction and plant regeneration using apical bud and nodal explants of 100 year old tree of Anthocephalus cadamba, an important sacred and medicinal tree in India was achieved for the first time. Aseptic explants cultured in Murashige and Skoog (MS) medium augmented with different concentrations of BAP (0.1, 0.5, 1.0, 2.5, 5.0 and 10 mg/l), when maintained for 60 days, healthy shoots were induced in presence of BAP (1 mg/l). Lower concentrations of BAP (0.1 - 0.5 mg/l) induced only one shoot per explant. Increase in number of shoots per explant was observed in presence of higher concentrations of BAP (2.5, 5.0 and 10 mg/l). However, elongation of shoots was completely inhibited. Bud break and shoot regeneration was largely associated with seasonal factors. Apical buds cultured during June to August exhibited early bud break within two weeks of initial culture. In rest of the months, bud break and shoot regeneration was very slow irrespective of the various concentrations of BAP used in the medium. Explants sourced from three different maturity levels of shoots indicated that actively growing shoots from the mother plant with 1 - 2 nodal segments was more suitable for culture initiation than the explants collected from mature shoots at dormant stage. Regenerated shoots with 2 - 3 pairs of leaves when transferred to half strength MS medium fortified with IBA (1 mg/l), 60% of the shoots induced healthy roots, indicating the possibility of large scale micropropagation.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.1
• /
• pp.46-58
• /
• 2022

Wood from tropical plantation forests has lower physical and mechanical properties than mature wood. Furfuryl alcohol (FA) impregnation into the wood could help to enhance hydrophobic properties, dimensional stability, and structural strength. Furfurylation was applied to specimens of the following four fast-growing tropical wood species: jabon (Anthocephalus cadamba), sengon (Falcataria moluccana), mangium (Acacia mangium), and pine (Pinus merkusii). The discoloration and physical and mechanical properties were subsequently measured, and the results showed that furfurylated wood had a darker color and better physical and mechanical properties than untreated wood. Specifically, the furfurylated wood had higher density, modulus of elasticity, and hardness and lower moisture content, water absorption, swelling, and shrinkage. The furfurylation significantly enhanced physical and mechanical properties.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.327-336
• /
• 2013

Anatomical characteristics of White Jabon (Arthocephalus cadamba) and Red Jabon (Arthocephalus macrophyllus) were investigated by IAWA hardwood feature list. Both species were diffuse-porous, and radial multiple pore with 2~3 rows was mostly observed. Tangential diameter of vessel lumina was 100 to $200{\mu}m$, and vessels per square millimeter were 5 to 20. White Jabon has more vessels than Red Jabon. The number of solitary pore per square millimeter in both species was similar, but more pore multiple was observed in White Jabon. Axial parenchyma diffuse was observed in both species, but axial parenchyma of White Jabon was hardly identified on the cross section. Rays were classified into "body ray cells procumbent with over 4 rows of upright/square marginal cells" type and partly "all ray cells upright and/or square" type on radial section. Ray width 1 to 3 cells and 1 to 2 cells observed in White Jabon and Red Jabon, respectively. Ray height of White Jabon was $420{\mu}m$ and Red Jabon $474{\mu}m$. Fiber length was the range of 900 to $1,600{\mu}m$ in both species, and it showed a tendency to increase from pith to bark. Consequently, it is considered that pore multiple, ray width and axial parenchyma are to be suggested the keys for identification of both species.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.3
• /
• pp.324-335
• /
• 2019

Timber from plantation forests has inferior physical and mechanical properties compared to timber from natural forest because it is mostly from fast-growing tree species that are cut at a young age. Filling cell voids with methyl methacrylate (MMA) can improve the wood properties. The purpose of this study was to determine the physical and mechanical properties of MMA-impregnated wood from three fast-growing wood species, namely jabon (Anthocephalus cadamba (Roxb.) Miq.), mangium (Acacia mangium Willd) and pine (Pinus merkusii Jungh. & de Vriese). Wood samples were either immersed in MMA monomer or impregnated with it and then heated to induce the polymerization process. Jabon, which was the lowest density wood, had the highest polymer loading, followed by pine and mangium. The physical and mechanical properties of samples were affected by wood species and the presence of MMA, with higher-density wood having better properties than wood with a lower density. Physical and mechanical properties of MMA wood were enhanced compared to untreated wood. Furthermore, the impregnation process was better than immersion process resulting the physical and mechanical properties. Based on MOR values, the MMA woods were one strength class higher compared to untreated wood with regard to Strength Classification of Indonesian Wood.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.2
• /
• pp.81-97
• /
• 2023

The aim of this study were to evaluate tannin resorcinol formaldehyde (TRF) for the preparation of cross-laminated timbers (CLTs) made from fast-growing tree species and to analyze the physical and mechanical properties of CLTs. TRF copolymer resin was prepared by using the bark extracts of Swietenia mahagoni (L.) Jacq. It was observed that the TRF adhesive possessed less solid content (23.59%), high viscosity (11.35 poise), and high pH values (10.0) compared to the standard phenol resorcinol formaldehyde. The TRF adhesive was applied to produce CLTs with the addition of 15% tapioca and flour as an extender. The six-layered CLTs were produced from sengon (Falcataria moluccana Miq.), jabon [Anthocephalus cadamba (Roxb) Miq.], coconut (Cocos nucifera L.), and the combination of coconut-jabon and coconut-sengon wood. The analysis of variance revealed that the layer composition of CLT significantly affected the physical and mechanical properties of the beam. While the modulus of rupture met the standard, the moisture content and modulus of elasticity values did not fulfill JAS 1152-2007. All of the CLTs produced in this study demonstrated low formaldehyde emission, ranging from 0.001 mg/L to 0.003 mg/L, thereby satisfying the JAS 1152 for structural glue laminated timber.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.748-755
• /
• 2018

Timber from fast-growing tree species is susceptible to by biodeterioration attack, particularly subterranean termites. Impregnation with methyl methacrylate (MMA) potentially increases wood resistance to subterranean termite attack. Four wood species, namely sengon (Falcataria moluccana), jabon (Anthocephalus cadamba), mangium (Acacia mangium), and pine (Pinus merkusii), were impregnated with MMA, and samples of untreated and imidacloprid-preserved wood were prepared for comparison purposes. Small stakes, sized 0.8 cm by 2 cm in cross section by 20 cm in the longitudinal direction, were inserted into the ground for 3 months, and the weight loss of each specimen was determined at the end of the test period. A factorial $4{\times}3$ completely randomized design was used for data analysis; the first factor was wood species, and the second factor was treatment. The results showed that MMA polymer loadings were 27.88%, 24.91%, 14.14%, and 17.81% for sengon, jabon, mangium, and pine, respectively, and amounts of imidacloprid retention were $7.56kg/m^3$, $5.98kg/m^3$, $5.34kg/m^3$, and $9.53kg/m^3$, respectively. According to an analysis of variance, wood species, treatment, and interaction of both factors significantly affected the weight loss of wood specimens. Mangium had the smallest weight loss, followed by pine, sengon, and jabon. MMA impregnation into the wood increased the resistance of wood samples to subterranean termite attack during in-ground testing, but the resistance level was lower than that of imidacloprid-preserved wood. Except for mangium wood, the MMA treatment did not significantly affect resistance.