• 한국전문물리치료학회지
• /
• 제19권4호
• /
• pp.55-60
• /
• 2012

The trochanteric prominence angle test (TPAT) has been used to measure the femoral anteversion angle between the tibial crest and the vertical line. However, the exact anatomical reference of the tibial crest has not yet been identified in the literature. Thus, the purposes of this research were twofold: first, to compare the femoral anteversion angle measured at three different anatomical references of the tibial crest (the proximal tibial crest, the proximal third of tibial crest, and the proximal half of tibial crest) and, second, to determine inter-and intra-rater reliabilities of the femoral anteversion angle measured at these three different anatomical references of the tibial crest during the TPAT. We recruited 14 healthy subjects, and a total of 28 legs were examined. The TPAT was measured using a digital inclinometer. A 1-way repeated-measure analysis of variance was used to compare the femoral anteversion angle measured at three different anatomical references of the tibial crest, and intraclass correlation coefficients (ICCs) were calculated to determine reliability. The femoral anteversion angle measured at the proximal tibial crest was significantly higher than that at the proximal third of the tibial crest and the proximal half of the tibial crest. The inter-and intra-rater reliabilities of femoral anteversion angle were measured at three anatomic references of the tibial crest were all found to be high during the TPAT (ICC=.9 0~.98). In conclusion, clinicians should recognize that the different degrees of the femoral anteversion angle could be measured when different anatomical references of the tibial crest were used, and that reliabilities were high when an exact anatomical reference of the tibial crest was used during the TPAT.

• 대한인간공학회지
• /
• 제20권3호
• /
• pp.27-35
• /
• 2001

The measurement of the fermoral anteversion is an important factor in the practice of orthopedic surgery. The anteversion is measured by means of the axis of head and neck of the femur. In this study. widely used computed tomography method of measuring anteversion was tested on femoral necks of patients. Measurement by the manual method and image viewer of computed tomography to determine the anteversion of femoral head were carried out on both femurs. In January and February 2001, 30 patients 3 to 6 years of age were randomly selected from Seoul National University Hospital. the purpose of this paper was to introduce a new method to measure femoral anteversion angle utilizing image viewer program. This new method was more accurate and convenient than the conventional manual method. No significant difference was observed between the manual method and the image viewer measurement of femoral anteversion. In conclusion, image viewer program was statistically more reliable in determining the angle of the fermoral anteversion.

• 한국전문물리치료학회지
• /
• 제13권4호
• /
• pp.1-9
• /
• 2006

The purpose of this research was to analyze the effects of the increase of the femoral anteversion angle on the unbalanced quadriceps femoris muscle causing the increase of the valgus force on the knee joints and patellofemoral pain syndrome by comparing with the group that shows the smaller femoral anteversion angle. The method for the research was to compare the femoral muscle's activity while the subjects were maintaining the knee joint flexed isometrically for 10 seconds. The evaluation tool for femoral muscle's activity was QEMG-4 (model LXM 3204). The results were as followings. Firstly, in case of the experimental group, the muscle strength of the vastus lateralis muscle was strong while the rectus femoris and vastus medialis were weak. In these facts, we can see the statistically meaningful difference in vastus medialis muscle activity. Secondly, in the muscle activity analysis for vastus lateralis and medialis of the two groups, we could see the vastus lateralis muscle was strong in anteversion wider for experimental group while the vastus medialis muscle contracted far more stronger in anteversion smaller for control group. From these results, we can see the significant differences in muscle recruitment between the two groups. Above results show that if the anteversion becomes wider, vastus medialis muscle will become seriously weaker, on the other hand, vastus lateralis act stronger.

• 한국임상수의학회지
• /
• 제33권6호
• /
• pp.340-345
• /
• 2016

The present study determined the normal reference ranges for the femoral and tibial joint orientation angles of small-breed dogs. For this purpose, 60 each of cadaveric canine femurs and tibias from normal small-breed dogs (Maltese, Poodle, Shih Tzu, Yorkshire Terrier) were examined with radiographs and photographs. Axial and frontal radiographs and photographs of each bone were obtained, from which anteversion and inclination angles, anatomic lateral proximal and distal femoral angles (aLPFA and aLDFA), mechanical lateral proximal and distal femoral angles (mLPFA and mLDFA), and mechanical medial proximal and distal tibial angles (mMPTA and mMDTA) were measured. The 95% CI for radiographic values of all femurs and tibiae were anteversion angle, $23.4-27.4^{\circ}$; inclination angle, $128.4-130.4^{\circ}$; aLPFA, $117.8-122.1^{\circ}$; aLDFA, $93.7-95.2^{\circ}$; mLPFA $113.8-117.3^{\circ}$; mLDFA $99.2-100.5^{\circ}$; mMPTA $96.8-98.5^{\circ}$; mMDTA $89.4-90.7^{\circ}$. The Maltese had a larger anteversion angle than the Poodle and the Yorkshire Terrier and a larger mLPFA than the Poodle. In the comparison between the radiographs and the photographs, significant differences were found in the anteversion angle, mLPFA, mMPTA, and mMDTA. The established normal reference values might be useful for determining whether a valgus or varus deformity of the femur or the tibia is present and if so, the degree of angular correction needed.

• 대한방사선기술학회지:방사선기술과학
• /
• 제26권1호
• /
• pp.83-89
• /
• 2003

대퇴골 전염각의 정확한 측정은 정형외과 분야에서 중요한 의미를 가지며, 원위 대퇴골의 양과부를 횡단하는 면에 대하여 대퇴골 경부의 장축이 전방으로 기울어진 축면상의 각도이다. 대퇴골부와 슬개골부를 전산화단층촬영한 영상을 측정하고 있는 기존의 CT 영상의 대퇴골 측정법을 대신하여 다양한 Pulse sequence를 이용한 자기공명영상으로 PACS Image viewer에서 성인 남자 $28{\sim}36$세를 대상으로 대퇴골 전염각을 측정하였다. 오른쪽 대퇴골 전염각의 T2강조영상은 $18.5{\sim}45.4^{\circ}$, T1강조영상 $18.9{\sim}25.6^{\circ}$, 경사에코 $18.7{\sim}26.0^{\circ}$, 지방억제기법 $21.3{\sim}24.9^{\circ}$, 왼쪽 대퇴골 전염각의 T2강조영상은 $19.2{\sim}24.3^{\circ}$, T1강조영상 $18.8{\sim}24.5^{\circ}$, 경사에코 $20.1{\sim}25.6^{\circ}$, 지방억제기법 $20.0{\sim}25.3^{\circ}$로 측정되었고, 오른쪽과 왼쪽 대퇴골 전염각의 이원배치 분산분석에서 모두 유의한 차이가 있었다(p<0.05). 수 작업 방법의 대퇴골 전염각 측정에 비해 Image Viewer 프로그램에서는 마우스를 이용한 측정으로 편리하였고, MR 영상은 CT 영상에 비해 다양한 Pulse sequence를 선택적으로 적절한 촬영기법을 사용하여 대퇴골 전염각 측정에 유용하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.141-144
• /
• 1997

Femoral neck anteversion is the angle between the neck and the knee axis projected on a plane perpendicular to the longitudinal axis. Conventional methods that use cross-sectional Computed Tomography(CT) images to estimate femoral anteversion have several problems because of the complex 3D structure of the femur. These are the ambiguity of defining the longitudinal axis, the femoral neck axis and condylar line, and the dependence on patient positioning. Especially the femoral neck axis that is known as a major source of error is hard to determine from a single or multiple 2D transverse images. So we developed a new method for measuring femoral anteversion by 3D modeling method. In this method, femoral head is modeled as a sphere. The center of femoral neck is the mid-point of the 2D reconstructed oblique image in the femoral neck part. Then neck axis is a line connecting foregoing two centers. We model the longitude of femur as a cylinder, and the long axis is defined from the fitted cylinder. The knee axis which is tangent to the back of the femoral condyles is easily determined by table-top method. By the definition of femoral anteversion, the femoral anteversion is easily calculated from this model.

• 한국임상수의학회지
• /
• 제37권4호
• /
• pp.180-184
• /
• 2020

The purpose of this study was to report the reliability and validity of oblique single-cut rotation osteotomy (OSCRO) in 3D-reconstructed canine bone models with femoral varus and torsional deformities. A healthy adult male beagle was recruited to create a 3D bone model, and this bone model was modified by using a 3D program. Fifteen bone models were constructed for this study. OSCRO simulation was performed in accordance with the plan after printing using a 3D printing machine. The anatomical lateral distal femoral angle (aLDFA), anteversion angle (AA), anatomical caudo-distal femoral angle (aCdDFA), mechanical caudo-distal femoral angle (mCdDFA) and pre- and postoperative bone length were calculated. There were no significant differences between the target values and postoperative values. In addition, the difference between pre- and postoperative bone length was small (p = 0.001). Our findings suggest that OSCRO could be an effective surgical option for MPL with bone deformities in small-breed dogs that often undergo conventional distal femoral osteotomy.

• Clinics in Orthopedic Surgery
• /
• 제10권4호
• /
• pp.420-426
• /
• 2018

Background: The tibial tuberosity-trochlear groove (TT-TG) distance is used to determine the necessity of tibial tubercle osteotomy. We conducted this study to determine the extent to which each of the tibial tuberosity lateralization, trochlear groove medialization, and knee rotation angle affects the TT-TG distance in both normal and patella dislocated patients and thereby scrutinize the rationale for tuberosity transfer based on the TT-TG distance. Methods: Retrospective analysis of rotational profile computed tomography was done for patella dislocated and control group patients. Femoral anteversion, tibial torsion, knee rotation angle, tuberosity lateralization, and trochlear groove medialization were assessed in all patients. Relationship of these parameters with the TT-TG distance was investigated to evaluate their effects on the TT-TG distance. Results: We observed that the patellar dislocation group, compared to the control group, had increased TT-TG distance (mean, 19.05 mm vs. 9.02 mm) and greater tuberosity lateralization (mean, 64.1% vs. 60.7%) and tibial external rotation in relation to the femur (mean, $7.9^{\circ}$ vs. $-0.81^{\circ}$). Conclusions: Tuberosity lateralization and knee rotation were factors affecting patellar dislocation. These factors should be considered in addition to the TT-TG distance to determine the need for tibial tubercle osteotomy in patients with patellar dislocation.

• 대한정형외과학회지
• /
• 제56권2호
• /
• pp.134-141
• /
• 2021

목적: 슬개골 탈구는 다양한 원인을 가지고 있다. 슬개골 주위 연부조직 균형을 일차 목표로 한 치료 결과를 분석하였다. 대상 및 방법: 28명의 환자(여자 21명, 남자 7명)에서 발생한 32예의 슬개골 탈구를 대상으로 하였다. 환자군의 평균 연령은 11.5세였으며 수술 후 평균 4.6년을 추시하였다. 탈구의 종류는 만성 19예, 습관성 6예, 선천성 6예, 급성이 1예였다. 연부조직 균형 수술은 관절 외측 유리술, 내측 주름술, 내측 대퇴광근의 외측하부 이전술을 기본으로 하였고, 슬개건 전체 혹은 슬개건과 대퇴직건의 내측 일부의 내측 이동술, 원위 대퇴 교정 절골술 등을 선별적으로 시행하였다. 수술 전 Q각과, 대퇴 전염각, 경골 외회전각, TT-TG 거리(tibial tubercle-trochlear groove distance), 기계적 대퇴-경골각, Dejour 분류에 따른 대퇴 과간 절흔 이형성 등을 측정하였고 수술 전후 Lysholm-Tegner 점수를 이용하여 임상 결과를 분석하였다. 결과: 수술 전 평균 Q각은 9.3°±5.8°, TT-TG 거리는 15.5±6.2 mm, 대퇴 전염각은 25.6°±12.3°, 경골 외회전각은 30.4°±9.6°, 기계적 대퇴-경골각은 3.0°±6.4°, Lysholm-Tegner 점수는 75.8±9.6점이었다. Beighton score 5점 이상의 전신인대 이완성을 보인 환아는 11명이었다. 대퇴 과간 절흔의 이형성을 가진 환자는 22명이었고, Dejour 등의 분류에 따라 A형이 3명(4예), B형이 15명(16예), C형이 1명(1예), D형이 3명(4예)였다. 32예 중 28예에서 1차 수술로 정복을 얻었고, 아탈구를 보인 4예 중 3예에서 2차 수술, 그 중 1예에서 3차 수술 이후 정복을 얻었고, 1예는 경과 관찰 중이다. Lysholm-Tegner 점수는 수술 후 최종 85.6±11.6점으로 향상되었다. 결론: 슬개골 탈구의 다양한 원인을 동시에 모두 교정하기는 어렵다. 연부조직 균형 수술과 함께 대퇴골-경골 기계적 축과 염전 이상 교정 절골술 등 적절한 술식을 조합해야 만족스러운 결과를 얻을 수 있다.

• 대한정형외과학회지
• /
• 제53권6호
• /
• pp.490-497
• /
• 2018

목적: 65세 이상 노인 환자들을 대상으로 세라믹 대퇴 골두 및 교차결합 폴리에틸렌 라이너를 인공 관절면으로 사용한 무시멘트형 인공 고관절 전치환술의 최소 5년 이상 임상 및 방사선 추시 결과들을 분석하여 세라믹-폴리에틸렌 관절면의 유용성 여부를 알아보고자 하였다. 대상 및 방법: 2010년 3월부터 2012년 9월까지 65세 이상 노인 환자 51명(56 고관절)을 대상으로 후향적 연구를 진행하였다. 평균 연령은 $70.9{\pm}5.1$세였다. 임상 평가는 Harris hip score를 이용하였고, 방사선 평가는 비구 컵 경사각 및 전염각, 대퇴 스템 정렬 상태, 마모를 측정하였다. 수술 후 합병증 발생 유무도 조사하였다. 결과: 임상 평가상 Harris hip score는 수술 전 평균 48점에서 최종 추시 시 평균 87점으로 향상되었다(p<0.05). 방사선 평가상 평균 비구 컵 경사각은 $40.9^{\circ}{\pm}6.4^{\circ}$, 평균 비구 컵 전염각은 $20.3^{\circ}{\pm}8.1^{\circ}$였다. 거상 라이너를 사용한 16예에서 평균 비구 컵 전염각은 $14.3^{\circ}{\pm}7.9^{\circ}$, 중립 라이너를 사용한 40예에서 평균 비구 컵 전염각은 $22.4^{\circ}{\pm}9.1^{\circ}$였다(p<0.05). 평균 대퇴 스템 정렬각은 $0^{\circ}$도(범위, 내반 $4^{\circ}$-외반 $4^{\circ}$)였다. 평균 선상 마모량은 $0.458{\pm}0.041mm$였으며 평균 연간 선상 마모율은 $0.079{\pm}0.032mm/yr$였다. 수술 후 합병증으로 대퇴 스템 주위 골절 6예(10.7%)가 발생하였다. 결론: 본 연구 결과 분석상 탈구나 세라믹-폴리에틸렌 관절면에서 기인한 합병증이 없으므로 65세 이상 노인 환자에서 무시멘트형 인공 고관절 전치환술 시행 시 세라믹-폴리에틸렌 관절면을 유용하게 사용할 수 있으나 수술 중 대퇴 스템 주위 골절 발생을 방지하기 위한 좀 더 세심한 노력이 필요하다.