• The korean journal of orthodontics
• /
• v.25 no.6 s.53
• /
• pp.675-688
• /
• 1995

The purposes of this study were:1) to determine the normal range of CR-CO discrepancy in normal occlusion group ; 2) to evaluate the changes of condylar position and craniofacial morphology between centric relation and centric occlusion before and after stabilization splint therapy in malocclusion group outside the normal range of CR-CO discrepancy. The normal occlusion group consisted of 80 subjects who had well-balanced faces and good occlusions with acceptable Class I molar relationship. They had not been treated orthodontically and had no signs or symptoms of temporomandibular joint dysfunction. 71 malocclusion patients enrolled for orthodontic treatment at the Department of Orthodontics, College of Dentistry, Chosun University comprised the malocclusion group, little variation of growth factor by the second molar eruption. They had CR-CO discrepancy beyond normal range and were subdivided into anterior-posteriorly -[25 Class I (0$\geq$4), and 24 Class III (ANB$\leq$0)] : vertically - [20 Normodivergentscy (30$\geq$34), and 18 Hypodivergency (SNGoMe$\leq$30)] ; and sexually - [26 Male and 45 Female]. For malocclusion group, stabilization splint with mutually protected type of occlusal scheme was applied for three months. Panadent articulators, Panadent condylar position indicator (CPI), and lateral headfilm were used to investigate the influence of stabilization splint on condylar position and craniofacial morphology. The results of this study were as follows. 1. The amounts of CR-CO discrepancy in normal occlusion were that the antero-Posterior component (${\bigtriangledown}X$) was $0.56\pm0.46mm$ (Male:$0.63\pm0.42mm$, Female:$0.49\pm0.50mm$) ; the supero-inferior component (${\bigtriangledown}Y$) was $-0.75\pm0.48mm$ (Male:$-0.76\pm0.52mm$, Female:-$0.73\pm0.43mm$) : and the transverse component (${\bigtriangledown}Z$) was $-0.33\pm0.28mm$ (Male : $-0.38\pm0.29mm$, Female:$-0.31\pm0.27mm$). 2. The condylar position was in normal range after stabilization splint therapy. 3. The mandible was always rotated infero-posteriorly after stabilization splint therapy. 4. Antero-posteriorly, Class III malocclusion responded very well to the stabilization splint therapy. 5. Vertically, Hyperdivergency responded very well to the stabilization splint therapy 6. Sexually, Male responded very well to the stabilization splint therapy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.731-752
• /
• 1995

This study was performed to research the changes of masticatory system subsequent to randomly increasing the vertical dimension. The subjects were twenty seven persons, twenty two men and five women, with a mean age of 24.3(age ranged from 22 to 26). The subjects had a complete or almost complete set of natural teeth and reported no subjected symptoms of pain or dysfunction in the masticatory system. The occlusal splint increased vertical dimension was made on semiadjustable articulator. The subjects were randomly divided to three groups according to the vertical dimension, at which the occlusal splint was made. Group I occlusal splints were made at 2mm form the occlusal vertical dimension, group II occlusal splints at 5mm, group III occlusal splints at 8mm. The occlusal splints were almost weared for 2 weeks except meal-time. Clinical examination, muscle activity, changes of free-way space, movement of mandible and articular condyle were recorded and analyzed by means of biopak system(Bioresearch Inc, Millwakee Wisconsin.) and radiograph. 1. In clinical examination, various symptoms were reported by all subjects immediately after the placement of occlusal splint. At the end of experiment, symptoms were lasted by 1 subject in Group I, 2 subjects in Group II, 6 subjects in Group III. At the other subjects, the most of symptoms were disappered within 2-4 days after the placement of occlusal splints. 2. The average free-way space before the startof experiment was 1.77mm in all twenty seven subjects. Immediately after the placement of occlusal splints, 0.67mm at Group I, 0.49mm at Group II, 0.41mm at Group III, At 2 weeks after the placement of occlusal splint 0.93mm, 0.79mm, 0.78mm each other, 1.94mm, 1.77mm, 2.3 mm at immediately after the removal of occlual splint. At 1 week after the removal of occlusal splint, free-way space was recovered to the pre-experimental state 3. In cephalometric radiograph, following either the placement or the removal of the occlusal splints, the movements of mandible in an antero-posterior direction were not statistically significant(p>0.05). 4. In transcranial radiograghs of TMJ, 1 week after the placement of occlusal splint the movement of most superior position on condyle in all group shoed antero-inferior position than before the experiment(p<0.001) and also showed antero-inferior position in mandibular postural rest position than in certric occlusion(p<0.001). Following either the placement or the removal of the splints, the amount of movement of most superior position on condyle was group III. group II and group I in order(p<0.001). 5. In anterior temporal and superficial masseter muscle, muscle activity at postural rest position decreased at 2 weeks after the placement of occlusal splint in group I and group II (p>0.05), but significantly increased in group III(p<0.001). At 1 week after the removal of the occdusal splint, muscle activity at postural rest position was recovered preconditional state 6. In anterior temporal and superficail masseter muscle, muscle activity at clenching in all group was significantly decreased after placement of the occlusal splint, slightly increased during experimental period and recovered to the original state at 1 week after removal of the occlusal splint. But was not statistically significat(p>0.05)s.

• Imaging Science in Dentistry
• /
• v.30 no.2
• /
• pp.109-116
• /
• 2000

Purpose : To compare the size and bone wall thickness of the maxillary sinus in normal, preoperative and postoperative maxillary sinusitis patients. Materials and Methods : The author analyzed CT images of both left and right maxillary sinuses in 357 patients who visited Chonbuk National University Hospital between January 1997 and December 1998. The size and bone wall thickness of the maxillary sinus of normal, inflammatory and post-Caldwell-Luc groups were compared. Results: The significant differences of transverse, maximum medio-lateral, maximum supero-inferior dimensions and medio-lateral dimension at nasal floor level between normal and post-Caldwell-Luc groups were found (P<0.05). And the significant differences of antero-posterior dimensions between inflammatory and post-Caldwell-Luc group were found (P<0.05). But, no significant differences of vertical height dimensions between groups was found (P>0.05). The significant differences of postero-lateral, infero-lateral and medial wall thickness between normal and post-Caldwell-Luc groups were found (P<0.05). Conclusion : The results of this study will aid in the diagnosis and treatment of maxillary sinus diseases and post operative treatment planning.

• Journal of Korean Neurosurgical Society
• /
• v.51 no.5
• /
• pp.247-252
• /
• 2012

Objective : The anatomical knowledge is the most important and has a direct link with success of operation in cervical spine surgery. The authors measured various cervical parameters in cadaveric dry bones and compared with previous reported results. Methods : We made 255 dry bones age from 19 to 72 years (mean, 42.3 years) that were obtained from 51 subjects in 100 subjects who donated their bodies. All measurements from C3-C7 levels were made using digital vernier calipers, standard goniometer, and self-made fix tool for two different cervical axes (canal and disc setting). We classified into 4 groups (uncinate process, vertebral body, lamina, and pedicle) and measured independently by two neurosurgeons for 28 parameters. Results : We analyzed 23970 measurements by mean value and standard deviations. In comparing with previous literatures, there are some different results. The mean values for uncinate process (UP) width ranged from 5.5 mm at C4 and 5 to 6.3 mm at C3 and C7 in men. Also, in women, the mean values for UP width ranged from 5.5 mm at C5 to 6.3 mm at C7. C7 was widest and C5 was most narrow than other levels. The antero-posterior length of UP tended to increase gradually from C3 to C6. The tip way, tip distance, and base distance of UP also showed increasing pattern from C3 to C7. Conclusion : These measurements can provide the spinal surgeons with a starting point to address bony architectures surrounding targeted soft tissues for safeguard against unintended damages during cervical operation.

• Journal of Korean Neurosurgical Society
• /
• v.57 no.4
• /
• pp.276-282
• /
• 2015

Objective : The purpose of this study was to investigate morphological change at the craniovertebral junction (CVJ) region using computed tomography. Methods : A total of 238 patients were included in this study, and mean age was $47.8{\pm}21.3months$. Spinal canal diameter, Power's ratio, McRae line, antero-posterior C1 ring height, atlantoaxial joint space, C2 growth, epidural space from the dens (M-PB-C2) and longitudinal distance (basion to C2 lower margin, B-C2) were measured. The mean value of each parameter was assessed for individual age groups. The cohorts were then divided into three larger age groups : infancy (I) (${\leq}2years$), very early (VE) childhood (2-5 years) and early (E) childhood ($5{\geq}years$). Results : Spinal canal diameter increased with age; however, this value did not increase with statistical significance after VE age. A significant age-related difference was found for all C2 body and odontoid parameters (p<0.05). Mean McRae line was 8.5, 8, and 7.5 mm in the I, VE, and E groups, respectively. The M-PB-C2 line showed up-and-down dynamic change during early pediatric periods. Conclusion : Expansion of the spinal canal was restricted to the very early childhood period (less than 5 years) in the CVJ region; however, the C2 body and odontoid process increased continuously with age. The above results induced a dynamic change in the M-PB-C2 line. Although C2 longitudinal growth continued with age, the McRae line showed relatively little change.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.395-409
• /
• 2017

Objective: The purpose of this study was to optimize the number and positions of foot pressure sensors using the reliability analysis of the center of pressure (COP) in smart shoes. Background: Foot pressure can be different according to foot region, and it is important which region of the foot pressure needs to be measured. Method: Thirty adults (age: $20.5{\pm}1.8years$, body weight: $71.4{\pm}6.5kg$, height: $1.76{\pm}0.04m$) participated in this study. The foot pressure data were collected using the insole of Pedar-X system (Novel GmbH, USA) with a sampling frequency of 100Hz during 1.3m/s speed walking on the treadmill (Instrumented treadmill, Bertec, USA). The intraclass correlation coefficients (ICC) were calculated between the COP positions using 4, 5, 6, 7, 8, and 99 sensors, while one-way repeated measure ANOVA was performed between the standard deviation (SD) of the COP positions. Results: The medio-lateral (M/L) COP position using 99 sensors was positively correlated with the M/L COP positions using 6, 7, and 8 sensors; however, it was not correlated with the M/L COP positions using 4 and 5 sensors during landing phase (1~4%) (p<.05). The antero-posterior (A/P) COP position using 99 sensors was positively correlated with the A/P COP positions using 4, 5, 6, 7, and 8 sensors (p<.05). The SD of the COP position using 99 sensors was smaller than the SD of the M/L COP positions using 4, 5, 6, 7, and 8 sensors (p<.05). Conclusion: Based on our findings, it is desirable to arrange at least 6 sensors in smart shoes. Application: The study of optimizing the number and positions of foot pressure sensors would contribute to developing more effective smart shoes using foot pressure technology.

• Journal of Radiation Protection and Research
• /
• v.22 no.1
• /
• pp.47-58
• /
• 1997

The conversion coefficients of effective dose per unit air kerma and equivalent dose per unit fluence were calculated by MCNP4A code for antero-posterior(AP) and postero- anterior(PA) incidence of broad, unidirectional beams of photons into anthropomorphic MIRD phantom. Calculations have been performed for 20 monoenergetic photons of energy ranging from 0.03 to 10 MeV. The conversion coefficients showed a good agreement with the corresponding values given in the draft publication of joint task group of ICRP and ICRU within 10%. The deviations may arise from the differences of geometry in the MIRD phantom and the ADAM/EVE phantoms, and the differences in the codes and cross-section data used. Inclusion of a specific oesophagus model results in effective dose slightly different(5% at most) from the effective doses obtained by adopting the equivalent doses for the thymus or pancreas. Deletion of the ULI from the remainder organ appeared not to be significant for the cases of photon dosimetry covered in this study.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.473-479
• /
• 1997

This author tried to find if the size of the frontal sinus can be used as a diagnostic aid to predict the manldibular growth pattern in growing Patients in lateral cephalogram utilizing the fact the the frontal sinus completes its growth in earlier stage but the mandible continues to grow until later. At this study, the 228 samples were divided into 3 groups as skeletal Class I, II, III malocclusions and three indicies(ANB, APDI, Wits) were measured which indicate the mandibular body length and the antero-posterior relationship of maxilla and mandible to evaluate their relations with frontal sinus. And results were obtained as followings 1. The size of frontal sinus is highly related to ANB, APDI, Wits and mandilar body length.(p<0.001) 2. the size of the frontal sinus of the Cl III malocclusion group was on the lateral cephalogram larger than Cl I and Cl II group.

• Imaging Science in Dentistry
• /
• v.30 no.1
• /
• pp.23-32
• /
• 2000

Purpose : The purpose of this study is to compare radiographic techniques for the diagnostic accuracy in the detection of osteophytes of the mandibular condyle. Material and Methods : A series of bone chips were placed at four locations on the condylar head of a dried human skull. Eight radiographic techniques such as panoramic, transcranial, infracranial, transorbital, reverse-Towne's, submentovertex, multidirectional tomographic and computed tomographic techniques were compared. Three oral radiologists were asked to rate the lesions by four stage score. The statistical analysis was performed by ANOVA test. Results: For the detection of lateral osteophyte, transcranial, infracranial, transorbital and reverse-Towne' s views showed superiority. Also, transcranial and infracranial views showed superiority for medial osteophyte. While for the detection of superior and anterior osteophyte, panoramic, transcranial, infracranial, transorbital views showed superiority. Lateral tomograph showed superiority for the detection of superior and anterior osteophyte, but it showed inferiority for lateral and medial osteophyte. And antero-posterior tomograph showed superiority for the detection of all osteophytes. Axial computed tomograph showed superiority for the detection of all osteophytes, and coronal computed tomograph showed superiority for lateral, medial and superior osteophytes. While reconstructed sagittal computed tomograph showed relatively superiority for the detection of anterior and superior osteophytes. Conclusion : The conventional radiographs can be used for the detection of bony changes of the mandibular condyle, and tomograph or computed tomograph can be used additionally when it is difficult to detect bony changes on conventional radiographs.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.3
• /
• pp.309-315
• /
• 2011

The purpose of this study was to evaluate the effect of asymmetric muscle force in lower extremity on dynamic balance during walking. Sixteen elementary students(age: 12.3${\pm}$0.7 yrs, height: 149.4${\pm}$9.7 cm, weight 40.6${\pm}$7.8 kg) who have no musculoskeletal disorder were recruited as the subjects. Temporal parameters, M-L inclination angle of XCoM-CoP, M-L and A-P CoP, loading rate, and decay rate were determined for each trial. For each dependent variable, a independent-sample t-test was performed to test if significant difference existed between each conditions(p<.05). The displacement of antero-posterior COP during RTO-LHC1 in SG was siginificantly smaller than corresponding value in AG. In contrast, the displacement of medio-lateral COP during RTO-LHC1 in SG was greater than those of AG. It seems that imbalance of muscle force may result in increasing the medio-lateral stance in order to minimize the instability. We found that the asymmetric muscle force in the lower extremity may be a reason for the awkward control of impact force.