• Archives of Plastic Surgery
• /
• v.32 no.6
• /
• pp.739-743
• /
• 2005

Subcondylar fractures have generally been treated by intermaxillary fixation except in cases where there is an absolute indication for open reduction. The reason behind a less aggressive surgical approach lies on the inherent difficulties in manipulating fragments in such a small area at the risk of damaging facial nerves or vessels such as the internal maxillary artery. However, long-term follow-up studies showed that conservative treatment of subcondylar fractures results in disturbances of occlusal function, deviation of the mandible, internal derangement of the temporomandibular joint, and ankylosis of the joint. We carried out open reduction of dislocated subcondylar fractures in 14 patients from 2000 to 2004 by a retromandibular approach. After the reduction of fractured bone, two H-shaped miniplates with 6 holes were fixed with screws at the anterior and posterior surfaces of the subcondyle. The retromandibular approach allowed good access and easy manipulation of the subcondyle. Immediate relief from malocclusion and correction of mandibular midline shifting were observed in all patients. Late temporomandibular dysfunction and ankylosis were not observed. Open reduction with plate osteosynthesis made it possible to avoid IMF in 7 of the 14 patients. The present study shows that open reduction through this retromandibular approach can produce good outcome in adult patients with subcondylar fracture.

• Journal of Trauma and Injury
• /
• v.36 no.4
• /
• pp.451-453
• /
• 2023

We introduce a convenient method of urethrography before catheterization for patients with pelvic trauma that can be used in a resuscitation area. A 10-mL syringe without a needle was used. X-ray contrast medium (Iohexol, 300 mg I/mL) was administered through the urethral orifice using a 10-mL syringe without needle and a simple pelvic anteroposterior film was taken (70 kilovolt [peak], 50 mAs). A 36-year-old soldier with a saddle injury from a gun barrel was taken to a trauma center. He had a pelvic fracture and complained of hematuria. Bedside urethrography above described was performed. The anterior urethra showed nonspecific findings, but dye leaked from the posterior urethra. Bedside Foley catheter insertion was attempted, but the catheter could not be advanced past the membranous urethra. Thereafter, suprapubic catheterization was performed. On the day of the injury, iliac artery embolization was carried out. The dislocated sacroiliac joint was also treated using open reduction and internal fixation. On hospital day 7, guidewire Foley insertion was performed. This bedside urethrography technique is simple and useful for pelvic fractures in which urethral injury is suspected.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.1
• /
• pp.37-45
• /
• 2010

Objective : Craniovertebral junction (CVJ) consists of the occipital bone that surrounds the foramen magnum, the atlas and the axis vertebrae. The mortality and morbidity is high for irreducible CVJ lesion with cervico-medullary compression. In a clinical retrospective study, the authors reviewed clinical and radiographic results of occipitocervical fusion using a various methods in 32 patients with CVJ instability. Methods : Thirty-two CVJ lesions (18 male and 14 female) were treated in our department for 12 years. Instability resulted from trauma (14 cases), rheumatoid arthritis (8 cases), assimilation of atlas (4 cases), tumor (2 cases), basilar invagination (2 cases) and miscellaneous (2 cases). Thirty-two patients were internally fixed with 7 anterior and posterior decompression with occipitocervical fusion, 15 posterior decompression and occipitocervical fusion with wire-rod, 5 C1-2 transarticular screw fixation, and 5 C1 lateral mass-C2 transpedicular screw. Outcome (mean follow-up period, 38 months) was based on clinical and radiographic review. The clinical outcome was assessed by Japanese Orthopedic Association (JOA) score. Results : Nine neurologically intact patients remained same after surgery. Among 23 patients with cervical myelopathy, clinical improvement was noted in 18 cases (78.3%). One patient died 2 months after the surgery because of pneumonia and sepsis. Fusion was achieved in 27 patients (93%) at last follow-up. No patient developed evidence of new, recurrent, or progressive instability. Conclusion : The authors conclude that early occipitocervical fusion to be recommended in case of reducible CVJ lesion and the appropriate decompression and occipitocervical fusion are recommended in case of irreducible craniovertebral junction lesion.

• Journal of Trauma and Injury
• /
• v.25 no.1
• /
• pp.7-16
• /
• 2012

Purpose: Cervical dislocations with locked facets account for more than 50% of all cervical injuries. Thus, investigating a suitable management of cervical locked facets is important. This study examined factors of close reduction failure in traumatically locked facets of the subaxial cervical spine patients to determine suitable surgical management. Methods: We retrospectively analyzed of the case histories of 28 patients with unilateral/bilateral cervical locked facets from Nov. 2004 to Dec. 2010. Based on MRI evaluation of disc status at the injury level, we found unilateral dislocations in 9 cases, and bilateral dislocations in 19 cases, The patients were investigated for neurologic recovery, closed reduction rate, factors of the close reduction barrier, fusion rate and period, spinal alignment, and complications. Results: The closed reduction failed in 23(82%) patients. Disc herniation was an obstacle to closed reduction (p=0.015) and was more frequent in cases involving a unilateral dislocation (p=0.041). The pedicle or facet fracture was another factor, although some patients showed aggravation of neurologic symptoms, most patients had improved by the last follow up. The kyphotic angle were statistically significant (p=0.043). Sixs patient underwent anterior decompression/fusion, and 15 patients underwent circumferential fusion, and 7 patients underwent posterior fusion. All patients were fused at 3 months after surgery. The complications were 1 case of CSF leakage and 1 case of esphageal fistula, 1 case of infection. Conclusion: We recommend closed reduction be performed as soon as possible after injury to maximize the potential for neurological recovery. Patients fot whom closed reduction of the cervical locked facets have a higher incidence of anatomic obstacles to reduction, including facet fractures and disc herniation. Immediate direct open anterior reduction or circumferential fixation/fusion of locked cervical facets is recommended as a treatment of choice for traumatic locked cervical facet patients after closed reduction failure.

• Journal of Korean Neurosurgical Society
• /
• v.67 no.1
• /
• pp.6-13
• /
• 2024

The integrity of the high cervical spine, the transition zone from the brainstem to the spinal cord, is crucial for survival and daily life. The region protects the enclosed neurovascular structure and allows a substantial portion of the head motion. Injuries of the high cervical spine are frequent, and the fractures of the C2 vertebra account for approximately 17-25% of acute cervical fractures. We review the two major types of C2 vertebral fractures, odontoid fracture and Hangman's fracture. For both types of fractures, favorable outcomes could be obtained if the delicately selected conservative treatment is performed. In odontoid fractures, as the most common fracture on the C2 vertebrae, anterior screw fixation is considered first for type II fractures, and C1-2 fusion is suggested when nonunion is a concern or occurs. Hangman's fractures are the second most common fracture. Many stable extension type I and II fractures can be treated with external immobilization, whereas the predominant flexion type IIA and III fractures require surgical stabilization. No result proves that either anterior or posterior surgery is superior, and the surgeon should decide on the surgical method after careful consideration according to each clinical situation. This review will briefly describe the basic principles and current treatment concepts of C2 fractures.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.8
• /
• pp.998-1003
• /
• 2001

Objective : The maintenance of the correction of kyphotic deformity is one of the difficult problem in tuberculous spondylitis after anterior debriment and fusion with tricortical bone graft. The goal of this study is to find out the efficacy of titanium mesh cage impacted with autogenous bone chip in tuberculous spondylitis treated with anterior intervertebral fusion. Materials and Method : Twelve patients were treated with anterior intervertebral fusion using titanium mesh cage for tuberculous spondylitis from January 1996 to June 1999. We analized the changes in the correction of kyphotic deformity, changes of ESR and CRP, fusion state and recurrence after anterior intervertebral fusion with titanium mesh cage. Results : Clinical symptoms were improved in all twelve patients without any neurologic complications. The mean kyphotic angle corrected was 7.3 degrees immediately after operation, but the loss of correction of kyphotic angle was 2.2 degrees after 3 months and 2.6 degrees after 6 months. We found that the loss of correction of kyphotic deformity occurred mainly within the first 3 months after surgery. Only one patient, suffered from acute hepatic failure after first operation and had an insufficient anti-tuberculous medication therapy, showed recurrence of tuberculous spondylitis after 6 months. The patient underwent a second operation with posterior fixation procedure with good outcome. The changes of ESR and CRP were not specifically important factor to reveal recurrence of tuberculosis of the spine in our series. Conclusion : The surgical procedure of tuberculous spondylitis using titanium mesh cage with bone chip seems to be an effective procedure to minimize loss of the correction of kyphotic deformity without any aggravating inflammatory change and recurrence with titanium mesh cage, when sufficient debridement and anti-tuberculous chemotherapy are achieved.

• The korean journal of orthodontics
• /
• v.29 no.1 s.72
• /
• pp.113-127
• /
• 1999

The purpose of this study is to investigate the stability of counterclockwise rotation of mandible by sagittal split ramus osteotomy to correct the skeletal Class III malocclusion with anterior open bite. Twenty five skeletal Class III open bite patients(mean age 20.6 years) who were treated by the sagittal split ramus osteotonues with rigid fixation were examined in this study. Cephalometric radiographs were taken for each Patients Preoperative(T1), ewly Postoperative(T2), and late postoperative Period(T3). Mean postoperative period was 8.0 months. Cephalometric analysis was done and data from T1, T2, and T3 were analyzed statistically by Paired t-test and Pearson correlation analysis. The following results were obtained. 1. Mandibular plane angle decreased $2.9^{\circ}$ and mandibular occlusal plane angle related to SN Plane decreased $2.7^{\circ}$ after orthognathic surgery(T2). At 6 months after orthognathic surgery(T3), mandibular plane angle increased $1.0^{\circ}$, but mandibular occlusal plane angle did not changed. 2. The amount of horizontal relapse long time after orthognathic surgery(T3) was 1.6 mm at B point and it was $22\%$ of the total posterior movements. There was no vertical relapse in the anterior facial height. 3. The related factor with horizontal relapse at late postoperative period was mandibular plane angle(p<0.01). The related factors with decreasing posterior facial height were amount of mandibular setback(p<0.01), increasing of mandibular ramus height(p<0.01), and decrease of the mandibular plane angle during operation(p<0.01). 4. There was no relationship between the amount of changes in mandibular occlusal plan angle during operation and the amount of relapse after surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.3
• /
• pp.196-204
• /
• 2002

For the study of its stability when the screw has been fixed after sagittal split ramus osteotomy(SSRO) of the mandible, the methods of screw arrangement are classified into two types, triangular and straight. The angles of screws to the bone surface are classified as perpendicular arrangements, the $60^{\circ}$ anterioinferior screw, known as triangular, and the most posterior screw, called straight arrangement, thus there are four types. The finite element method model has been made by using a three dimensional calculator and a supercomputer. The load directions are to the anterior teeth, premolar region, and molar region, and the bite force is 1 Kgf to each region. The distribution of stress, the von-Mises yield strength, and safety of margin refer to the total sum of transformed energy have been studied by comparison with each other. The following conclusion has been researched : 1. When shear stress is compared, in the triangular arrangement in the form of "ㄱ", the anterosuperior screw is seen at contributing to the support of the bone fragment. In the straight arrangement, substantial stress is seen to be concentrated on the most posterior angled screw. 2. When the von-Mises yield strength is compared, it seemed that the stress concentration on the angled anteroinferior screw is higher, it shows a higher possibility of fracture than any other screw. In the straight arrangement, stress appeared to be concentrated on the most posteriorly angled screw. 3. When the safety margins of the transfomed energy are compared, the energy conduction is much greater in the case of the angled screw than in the case of the perpendicular screw. The triangular arrangement in the form of "ㄱ" shows a superior clinical sign to that of the straight arrangement. Judging from the above results, when the screw fixation is made after SSRO in practical clinical cases, two screws should be inserted in the superior border of mandibular ramus and a third screw of mandibular inferior border should be inserted in the form of triangular. All screws on the bony surface should be placed perpendicularly-$90^{\circ}$ angles apparently best promote bony support and stability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.3
• /
• pp.207-217
• /
• 2010

The purpose of this study was to evaluate the effects of the stress distribution and displacement in mandible according to treatment modalities of mandibular angle fractures, using a three dimensional finite element analysis. A mechanical model of an edentulous mandible was generated from 3D scan. A 100-N axial load and four masticatory muscular supporting system were applied to this model. According to the number, location and materials of titanium and biodegradable polymer plates, the experimental groups were divided into five types. Type I had a single titanium plate in the superior border of mandibular angle, type II had two titanium plates in the superior tension border and in the inferior compression border of mandibular angle, type III had a single titanium plate in the ventral area of mandibular angle, type IV had a single biodegradable polymer plate in the superior border of mandibular angle, type V had a single biodegradable polymer plate in the ventral area of mandibular angle. The results obtained from this study were follows: 1. Stress was concentrated on the condylar neck of the fractured side except Type III. 2. The values of von-Mises stress of the screws were the highest in the just-posterior screw of the fracture line, and in the just-anterior screw of Type III. 3. The displacement of mandible in Type III was 0.04 mm, and in Type I, II, IV, and V were 0.10 mm. 4. The plates were the most stable in the ventral area of mandibular angle (Type III, V). In conclusion, the ventral area of mandibular angle is the most stable location in the fixation of mandibular angle fractures, and the just- posterior and/or the just-anterior screws of the fracture line must be longer than the other, and surgeons have to fix accurately these screws, and the biodegradable polymer plate also was suitable for the treatment of mandible angle fracture.

• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.457-466
• /
• 1999

It has been reported that skeletal relapse and dental change after mandibular setback do occur not only after intermaxillary fixation(IMF) removal but also during IMF The side effects of skeletal relapse during IMF have clinical importance because they can cause many Postoperative orthodontic Problems. Generally, the Prevention of solid union between segments, compensatory tooth movement, anterior openbite, etc. have been cited as the side effects of jaw displacement. The purpose of this study was to evaluate the skeletal relapse and dental change during IMF. The material consisted of 28 patients who were treated by BSSRO(bilateral sagittal split ramus osteotomy), wire osteosynthesis, IMF for correction of mandibular prognathism. Through cephalometric analysis, the amount and direction of surgical movement, skeletal relapse and dental change during IMF were measured. The correlation between surgical movement and skeletal relapse, between skeletal relapse and dental changes were evaluated. The following conclusions were obtained; 1. Distal segment was repositioned backward and upward, proximal segment showed clockwise rotation during surgery. 2. During ]m, anterior portion of distal segment was displaced backward and posterior portion was displaced upward. Proximal segment was displaced upward with forward movement of p-Go(gonion of proximal segment). Backward surgical movement of p-GO was significantly correlated with forward displacement of p-Go. 3. Overjet and overbite were not changed during IMF. The compensatory tooth movements during IMF were characterized by retroclination of upper incisors md retroclination, extrusion of lower incisors. These compensatory tooth movements had statistically significant correlation with upward displacement of d-Go (gonion of distal segment).