• Journal of the Korean Arthroscopy Society
• /
• v.3 no.2
• /
• pp.97-101
• /
• 1999

Purpose : The purpose of this study is to prevent thc graft-tunnel mismatch by measuring the patellar tendon length, intertunnel distance, tibial tunnel length and by obtaining appropriate bone block length. Materials and Methods : Authors analyzed 15 patients who had taken the anterior cruciate ligament reconstruction from March 1997 to June 1999. Tibial guide was always set on the "endo" $40^{\circ}$ position(Acufex, MA, USA). We measured the following indices, intertunnel distance(X), tibial tunnel length(T), patellar tendon length(N), tibia bone plug length(Y). Both of the femoral tunnel length(F) and the patellar bone plug length(P) were made in 25mm. The appropriate tibial bone plug length was simply calculated by subtracting the patellar tendon length from the sum of the intertunnel distance and thc tibial tunnel length(Y=X+T-N). Results : The average indices were as follows ; the intertunnel distance(X) was $23.4{\pm}1.4mm$, the tibial tunnel length(T) was $43.6{\pm}1.7mm$, the patellar tendon length was $40{\pm}2.4mm$, and the tibia bone plug length was $27{\pm}2.4mm$. Conclusion : In authors' endoscopic technique, establishment of individually determined optimal tibial bone plug length, based on total tunnel length and patellar tendon length could prevent the problem of graft-tunnel mismatch.

• Journal of the Korean Arthroscopy Society
• /
• v.6 no.2
• /
• pp.195-199
• /
• 2002

This article is to report a new technique for reconstruction of the anteromedial and posterolateral bundles of anterior cruciate ligament by separate tensioning and fixation of the each bundle. Method : Tibial and femoral tunnels were made with conventional technique of anterior cruciate ligament reconstruction. Tibial tunnel was enlarged $5\~7$ mm in anterior-posterior direction to make oval it in cross section. When preparing the Achilles tendon allograft, bone plug portion was trimmed as the conventional technique. The tendinous portion was trimmed as two separate bundles by dividing the tendinous portion longitudinally, so the graft is shaped like 'Y'. The bone plug portion of allograft was inserted into the femoral tunnel and fixed with absorbable cross pins. Two ligamentous portionss of the distal part of the grafts were tensioned separately at the external orifice. Anteromedial bundle was fastened under maximum tension with the knee flexed 90 degrees by post-tie method. The posterolateral bundle was fixed by the same technique with the knee in full extension. Then, an absorbable interference screw was inserted between the two bundles upto the upper end of the tibial tunnel, to get more initial rigidity of the reconstructed graft as well as to locate the two bundles in more anatomic position.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.1
• /
• pp.28-36
• /
• 2003

Purpose: To determine and to compare the effects of cyclic loading on the fixation strength of different femoral fixation methods in ACL reconstruction. Materials and Methods: Biomechanical test using an Instron(R) machine (Model No.5569. Mass, U.S.A) were carried out to compare the pull out strength of six different femoral fixation techniques after a cyclic loading in 72 Yorkshire pig knees. The graft-bone complex was cyclically loaded between 30N and 150N at 50 mm/min rate for 1000 cycles and maximal tensile testing was performed. A preload of 30N was applied to the graft along the axis of the tunnel 15 minutes. ANOVA and the Duncan multiple comparison test was used for the statistical analysis. Results: The mean maximum tensile strength of femoral fixation before and after the cyclic loading test were 1003.4$\pm$145N and 601.1$\pm$154N in hamstring-LA screw(R) group, 595.5$\pm$104N and 360.7$\pm$56N in hamstring-Bioscrew(R) group, 1431.7$\pm$135N and 710.7$\pm$114N in hamstring-Semifix(R) group, 603.6$\pm$54N and 459.1$\pm$46N in hamstring-Endobutton(R) fixation group, 1067.4$\pm$145 and 601.8$\pm$134N in the BPTB-Titanium interference screw group, and 987.1$\pm$168N and 588.7$\pm$124N in the BPTB-Bioscrew(R) group. And these data illustrated that cyclic loading reduces the maximum tensile strength by 40 $\%$, 39 $\%$, 50 $\%$, 24 $\%$, 44 $\%$, 40 $\%$ respectively. Conclusions: With the results of these experiments it should be emphasized that rehabilitation exercises after anterior cruciate ligament reconstruction should be executed with precaution as the repetitive flexion and extension of the knee would compromise the maximum tensile strength of the graft tendon.

• Journal of the Korean Arthroscopy Society
• /
• v.7 no.2
• /
• pp.153-159
• /
• 2003

Purpose : The purpose of this study was to compare the pattern of displaced bucket-handle tear of lateral and medial menisci and the treatment modality and results from accompanying injury. Materials and Methods : Patients who were diagnosed for displaced bucket-handle tear of medial meniscus (group I: 52patients, 52cases) and lateral meniscus (group II: 31patients, 32cases) from September 1998 to December 2002. The mean ages were 25years $(16\~66)$ for Group I and 29years $(18\~63)$ for Group II, and the average follow-up period were 18months $(12\~44)$ and 13months $(6\~46)$, respectively. The zone of meniscus tear and the existence of accompanying injury were verified through intraoperative arthroscopy and discoid type meniscus was additionally examined for group II. The assessment was made according to the physical examination and clinical pattern at the postoperative last follow-up, and the 2nd look arthroscopy was performed in 19cases $(23\%)$ for the cases accompanying anterior cruciate ligament (ACL) injury in both groups. Results : There were 38cases $(73\%)$ in group I, 5cases $(16\%)$ in group II for associating ACL injury. We observed discoid type meniscus (19cases, $59\%$) in group II. At last follow-up clinical success in repair cases of group I and II are 22cases $(85\%)$, 2cases $(67\%)$, in resection cases are 26cases $(100\%)$, 26cases $(93\%)$ respectively. Reoperation is performed 2cases in repair cases of group I. One case is re-rupture, the other case is newly developed tear in white-white zone. Reoperation is performed 2cases due to remnant meniscal tear in resection cases of group II. All of 2cases are discoid type menisci. Conclusion : Displaced bucket-handle tear of medial & lateral menisci would be substantially different an aspect, considering on difference would help to select proper treatment modality.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.1
• /
• pp.89-96
• /
• 2002

Purpose : The purpose is to analyze the relationship between bone bruise in MRI and associated injuries after the knee joint trauma. Materials and Methods : Total 50 cases were reviewed, divided into two groups according to initial trauma energy. High-energy group (group I), such as traffic accident was 13 cases, low-energy group (group II), such as sports trauma was 37 cases. The type of the lesion was used the classification by Costa-Paz. The site of lesion was analyzed according to femoral/tibial, medial/lateral and anterior/middle/posterior site respectively. Associated injuries were confirmed by physical examination, radiograph, MRI and arthroscopy. Results : In group I there was a various distribution of the bone bruise in the knee joint according to mechanism of injury. The bone bruise with ACL injury was 38$\%$ only and the most frequent type was Costa-Paz type I (52.6 $\%$). In group II more frequent locations were the middle portion of the lateral femoral condyle and the posterior portion of the lateral tibial condyle. Bone bruise associated with ACL injury, was upto 56.8 $\%$ and the frequent type were Costa-Paz type II (48 $\%$), in order type I (42 $\%$). As a result, in the high-energy injury the bone bruise had a various location in both condyle and less frequently associated injury, but in the low-energy injury there was particularly frequent location of bone bruise, associated injury and type. Conclusions : We could assess the associated injury by analysis of the location and type of bone bruise, especially in the low-energy injury, e.g. sports injury. But further study will be necessary with more case analysis.

• Journal of the Korean Arthroscopy Society
• /
• v.11 no.1
• /
• pp.63-68
• /
• 2007

Purpose: The authors introduce a new technique of arthroscopic all inside repair using anterolateral and anteromedial portals for lateral meniscus root complete radial tear in patients who underwent concurrent anterior cruciate ligament (ACL) reconstruction. Operative technique: Arthroscope is placed through anteromedial portal and suture hook ($Linvatec^{TM}$, Largo, Florida, USA) is delivered through anterolateral portal. By rotating the suture hook, it penetrates posterior horn of the torn meniscus from femoral to tibial surface for vertical orientation. PDS No. 1 ($Ethicon^{TM}$, Somerville, NJ, USA) is delivered through the suture hook, and then it is withdrawn. Both end of PDS No. 1 are taken out through the anterolateral portal. MAXON 2-0 ($Syneture^{TM}$, Norwalk, Connecticut, USA) is used to penetrates remnant of tibial attachment of the torn meniscus from tibial to femoral surface in a same manner. MAXON 2-0 is changed for PDS No. 1 from tibial to femoral surface by shuttle relay technique. PDS No. 1 is tied using SMC (Samsung Medical Center) knot. Conclusion: All inside repair is a useful technique to achieve anatomical repair and to restore the hoop tension in lateral meniscus root complete radial tear.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.2
• /
• pp.183-187
• /
• 2009

Purpose: We describe a new and simple technique for arthroscopic fixation of tibial intercondylar eminence avulsion fracture using bioabsorbable pins in skeletally immature patients. Operative Technique: Diagnostic knee arthroscopy is performed using anterolateral and anteromedial portals. Fracture debris and blood clot are debrided to expose the injured site well. The fragment is reduced with the probe and fixed temporarily with a 1.1-mm diameter K-wire that is inserted percutaneously from the anterosuperior aspect of the knee joint. The drill guide is introduced into the joint and the fragment is secured by bioabsorbable, poly-p-dioxanone 1.3-mm pins inserted from different angles. The pins are 40 mm in length. The knee is placed in a long leg cast in extension for 4 weeks to assure that full extension is obtained. Conclusion: Arthroscopic fixation of an tibial intercondylar eminence avulsion fracture using bioabsorbable pins is not a technically demanding, suitable method that ensures fracture healing and restores the stability of the joint.