• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.9 s.100
• /
• pp.941-948
• /
• 2005

In this paper, we have proposed a Ultra-Wideband slot notch antenna by using a semi-circular extension. The proposed antenna cover the entire UWB band(3.1${\~}$10.6 GHz) and notch out the IEEE 802.1la frequency band(5.15${\~}$5.825 GHz) by inserting a $\lambda$/4 length slot into the patch. A prototype antenna was fabricated on FR-4( ${\epsilon}_r$ =4.4, substrate thickness=0.8 mm) and measured for VSWR characteristics. The measured notched frequency variations versus frequency for different slot length. The path loss and group delay were measured. The proposed antenna also show a good gain flatness(1.9 dBi) except the IEEE 802.1la frequency band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.287-294
• /
• 2006

In the paper, characterization and analysis of UWB(Ultra Wide Band) antennas in time domain are described. The impulse propagation channel including UWB antennas is proposed for the analysis in time domain. Using the proposed propagation channel, the technique of obtaining impulse response of UWB antenna is proposed. Also, ringing, peak value of the impulse response, and the width of the impulse response are introduced as parameters for characterizing a UWB antenna in time domain. A modified UWB conical monopole antenna, a UWB TEM horn antenna, and a UWB stepped fat monopole antenna were fabricated. From the measurement of reflection coefficients, three antennas had bandwidth more than 3 GHz. The impulse responses of the antennas were measured in an anechoic chamber. The results showed that the TEM horn with highest gain has the highest peak amplitude and the stepped fat monopole antenna with narrowest bandwidth for reflection coeffcient had the widest width of the impulse response. Also, ringing in the stepped fat monopole antennas and the UWB conical monopole antenna were observed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.147-154
• /
• 2009

Antenna grouping algorithm is hybrid of beamforming and spatial multiplexing. In antenna grouping system, we partition $N_t$ transmit antennas into $N_r$ groups and use beamforming in a group, spatial multiplexing between groups. We can transmit $N_r$ data streams in the $N_t{\times}N_r$ antenna grouping system. With antenna grouping, we can achieve diversity gain through beamforming, and high spectral efficiency through spatial multiplexing. But if channel is ill-conditioned or there are some correlations between antennas, the performance of antenna grouping is seriously degraded and in that case, beamforming is the best transmit strategy. By selecting the antenna grouping mode when channel is well-conditioned and by selecting the beamforming mode when channel is ill-conditioned, we can prevent serious fluctuation of BER performance caused by varying channel condition and achieve the best BER performance. In this paper, we investigate mode selection algorithm which can select antenna grouping mode or beamforming mode. we also propose a simple mode selection criterion.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.106-113
• /
• 2011

In this paper, the non-resonant SWG(Slotted Waveguide) antenna with double slots in narrow wall of rectangular waveguide is designed. Because energy radiated from each slot depends upon inclination angle of slot of the designed antenna, inclination angle of each slot is controlled to satisfy the amplitude distribution for required sidelobe level. Instead of the conventional extraction method of slot conductance, this amplitude distribution is made by the proposed method, which employs far-field radiation pattern calculated by Fourier transform of aperture field distribution on slot. The non-resonant double SWG antenna is designed by the proposed method and is manufactured. The antenna performances are measured and compared with the simulated results.

• The Korean Journal of Malacology
• /
• v.11 no.2
• /
• pp.135-145
• /
• 1995

A morphological andk histochimical study on the amterior tintacular antenna of Korean sulg, Incilaria fruhstorferi was conducted under the light microscopic observations. The histological sturctures of the antenna were apparently divided into three parts such as the epithelium, the connective tissues and the muscular layers. The cells forming the antenna were classified into several types on the basis of their morphological and histochemical characteristics. The simple columnar epithelium cotering the whole antenna was composed of supporting cells, sensory neurons and type-a clear cells. The connective tissue was consisted of dispersed large cells, type-b clear cells and 7 types of secretory cills such as type-A, type-B, type-F, thpe-G, type-H, type-J and type-K. The large cells found in the form of group situated only in the stalk of the antenna. The large cells possessed relatively small nuclei as compared with their cytoplasm. The cytoplasm positively reacted upon alcian blue, and the nucleus was PASpositive. The type-a and type-b clear cells which were irregular in shape showed no evident reaction against various stains employed in the present study. The secrtory cells were observed mainly in the connective tissues and in the muscular layers. Histochemical components of the type-A, type-B and K were identified as acid mucopolysaccharides and those of type-F and H were neutral mucopolysaccharides. The muscular layders supporting the epithelium possessed the type-B and F secretory cells which were also observed in the connective tissues.

• Nuclear Engineering and Technology
• /
• v.56 no.8
• /
• pp.3236-3241
• /
• 2024

Ion cyclotron resonance heating (ICRH) is an important auxiliary heating method applied to the China Fusion Engineering Test Reactor, which can effectively heat the ions and electrons in plasma. Owing to the harsh nuclear environment, neutronic analyses are required to verify tritium self-sufficiency and neutron-shielding requirements. In this study, a neutronics analysis of the ICRH antenna was conducted using the COre and System integrated engine for Reactor Monte Carlo (cosRMC) code to estimate the neutron flux, radiation damage, nuclear heating, gas generation rate of key components, and tritium breeding ratio (TBR), providing data support for the subsequent optimization of the shielding design. In addition, the neutron flux of the coils around the antenna was calculated to prevent the entry of neutrons that damage the magnetic field coils through the gaps between the port plugs and antenna, and the shielding effects of the port-plug antenna on the surrounding components were analyzed. Finally, the results obtained using the cosRMC and MCNP codes were compared, which and presented good agreement, thus verifying the reliability of the neutronic analysis using the cosRMC code.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.921-922
• /
• 2006

This paper presents a novel scheme that quickly searches for the sweet spot of multiple array antennas, and locks on to it for high-speed millimeter wavelength transmissions. The proposed method utilizes a modified genetic algorithm, which selects a superior initial group through preprocessing in order to solve the local solution in a genetic algorithm. TDD (Time Division Duplex) is utilized as the transfer method and data controller for the antenna. Once the initial communication is completed for the specific number of individuals, no longer antenna's data will be transmitted until each station processes GA in order to produce the next generation. After reproduction, individuals of the next generation become the data, and communication between each station is made again. Simulation results confirmed the efficiency of the proposed method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.1
• /
• pp.54-63
• /
• 2023

In this paper, a VHF band conformal antenna for UAV mounting was developed. The proposed antenna was designed as an shape-adaptive structure by minimizing the antenna height to be advantageous in RCS reduction performance. As for the antenna radiator, the outer radiator was arranged around the inner radiator to apply the CRLH zeroth-order resonance structure. With this structure, the height of the antenna was minimized, and it was reduced by about 70 % compared to the existing blade antenna. In addition, for impedance matching, the intermediate frequency bandwidth of the VHF band was improved through the sleeve pin of the inner radiator, and the low frequency bandwidth of the VHF band was improved by applying an EMI shielding gasket to the shorting pin of the outer radiator. The proposed antenna was manufactured and measured to verify the performance of the device and the performance after UAV mounting. As a result, the standard was satisfied for the operating frequency.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.211-216
• /
• 2005

In this paper, we have designed, fabricated and measured a compact rectangular mono-cone antenna for ultra-wideband applications. The proposed antenna covers the entire UWB band (3.1 GHz $\sim$ 10.6GHz). The measured bandwidth is 8.2 GHz from 2.8GHz to 11 GHz for ${\mid}S_{11}{\mid}{\leq}-10dB$. From the measured results, the proposed antenna shows a good characteristics (linear phase, omni-directional pattern and very low gain variation) for UWB applications. Also, the measured results have a reasonable agreement with the simulated results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.3 s.94
• /
• pp.235-245
• /
• 2005

In this paper, a novel Ultra-Wideband(UWB) antenna fed by CPW is designed, fabricated, and measured for UWB communications. We have used the Microwave Studio of CST to simulate the proposed antenna. It is designed to work on a substrate TMM4 of thickness 0.762 mm and relative permittivity 4.5. The proposed antenna is satisfied with Ultra-Wideband communication band from 3.1 GHz to 11.5 GHz, for VSWR$\leq$2, and isolated IEEE 802.1la frequency band(5.15 GHz$\~$5.825 GHz) using a rectangular slot. Measured group delay variation is less than 1 ns, thus indicating the proposed antenna a good candidate for UWB applications.