• 제목/요약/키워드: Annual ring characteristics

검색결과 39건 처리시간 0.024초

설악산 지역의 Tree-ring 자료를 이용한 연 강수량 재생성 (Annual Precipitation Reconstruction Based on Tree-ring Data at Seorak)

  • 곽재원;한희찬;이민정;김형수;문장원
    • 한국물환경학회지
    • /
    • 제31권1호
    • /
    • pp.19-28
    • /
    • 2015
  • The purpose of this research is reconstruction of annual precipitation based on Tree-ring series at Seorak mountain and examine its effectiveness. To do so we performed nonlinear time series characteristics test of Tree-ring series and reconstructed annual precipitation of Gangneung from 1687 to 1911 using Artificial neural network and Nonlinear autoregressive exogeneous input (NARX) model which reflects stochastic properties. As a result, Tree-ring series at Seorak Mountain shows nonlinear time series property and reconstructed annual precipitation series drawn from NARX is similar in statistical characteristics of observed annual time series.

유럽산 바이올린 용재의 비중과 년륜폭이 소재의 음향적 성질에 미치는 영향 (Effect of specific gravity and annual ring width on the acoustical properties of European lumber used in violin making)

  • 정우양;홍병화
    • 한국가구학회지
    • /
    • 제10권1호
    • /
    • pp.57-63
    • /
    • 1999
  • This study was carried out to analyze the relationship between basic physical properties and acoustical characteristics of imported violin wood and to offer the information on raw material procurement and incoming-material quality control to domestic violin makers which have purchased most raw materials from European exporting countries at high expense. Equilibrium moisture content of European spruce with lower specific gravity after the prolonged storage was rather higher than that of European maple with higher specific gravity. The specific gravity of spruce increased with decreasing annual ring width, however, that of narrower annual ring. Increasement in specific gravity enhanced the dynamic Young's modulus of both wood species, but influenced the vibration energy loss by internal friction differently between two species. For dynamic MOE, qurater-sawn spruce was higher than the flat-sawn, but maple showed the reverse directional characteristics. Consequently, it would be well for violin makers to establish the standard for materials and quality control system to assure the quality of their violin products.

  • PDF

잣나무의 재질(材質)에 관(關)한 연구(硏究) (제(第) III 보(報)) - 연륜폭(年輪幅)과 추재율(秋材率) - (Studies on Wood Quality of Pinus koraiensis Sieb. et Zucc. (III) - On Annual Ring Width and Summer Wood Percentage -)

  • 이원용
    • 한국산림과학회지
    • /
    • 제24권1호
    • /
    • pp.25-44
    • /
    • 1974
  • 잣나무조림목(造林木)의 연륜구성(年輪構成)(연륜폭(年輪幅)과 추재율(秋材率)에 관(關)하여 조사(調査)한바 연륜폭(年輪幅)은 변재부(邊材部)에서 좁고 심재부(心材部)에서 넓으나 추재율(秋材率)은 그 분포(分布)가 반대(反對)이며 또한 연륜폭(年輪幅)의 크기는 수간중(樹幹中)에서 수관부(樹冠部)>지하부(枝下部)>지제부(地際部)의 경향(傾向)을 보이고 있는데 반(反)하여 추재율(秋材率)은 지제부(地際部)>지하부(枝下部)>수관부(樹冠部)의 관계(關係)를 가지고 있고 또한 연륜폭(年輪幅)과 추재율(秋材率)은 젊은 영계(齡階)에서는 그 변이(變異)가 심하여 재질(材質)이 비교적(比較的) 불안정(不安定)하나 수심(髓心)으로부터 약(約) 12-15년륜이후(年輪以後)의 재부(材部)에서는 그 변이(變異)가 적어 재질(材質)이 안정(安定)되어 있다. 한편 변재부(邊材部)에서의 연륜폭(年輪幅)과 추재율(秋材率)은 지상고(地上高)의 증가(增加)에 따라 거의 일정불변(一定不變)한 안정(安定)된 영역(領域)과 증감(增減)되는 두 영역(領域)으로 구분(區分)되며 그 한계(限界)가 되는 지상고(地上高)는 약(約) 7m이다. 연륜폭(年輪幅)과 추재율(秋材率)사이에는 부(負)의 상관(相關)이 있다.

  • PDF

Soft X-ray분석(分析)에 의한 대기오염지역(大氣汚染地域)에서 자란 해송(Pinus thunbergii)의 연륜(年輪)의 특징(特徵) (Characteristics of Annual Rings of Pinus thunbergii Grown in the Air-polluted Area by Soft X-ray Analysis)

  • 김종갑;김재생
    • 한국산림과학회지
    • /
    • 제80권4호
    • /
    • pp.351-359
    • /
    • 1991
  • Soft X-ray에 의한 연륜밀도해석법(年輪密度解析法)으로 대기오염지역(大氣汚染地域)에서 자란 해송(Pinus thunbergii) 성목(成木)의 연륜(年輪)에 대한 특징(特徵)을 알아본 결과, 연륜폭(年輪幅)과 대기밀도(最大密度), 최대밀도(最大密度)와 최소밀도(最小密度)의 차(差)(이하DD)는 공장이 가동된 이후 오염원(汚染源)의 주변지역에서는 감소하는 경향을 나타내었으며 특히 오염원(汚染源)에서 가장 가까운 지역(地域)에서 가장 뚜렷히 감소하고 있었고 추재율(秋材率)과 최소밀도(最小密度)는 오염(汚染)으로 인한 감소와 증가의 뚜렷한 특징을 나타내지 않았다. 또한 연륜폭(年輪幅) 및 최대밀도(最大密度), DD는 공장가동직후 5년동안보다도 5년이후부터 더욱 감소되고 있었으며 감소율(減少率) 역시 공장가동 5년이후 부터 증가되었고 연륜폭(年輪幅)의 감소율(減少率)이 가장 컸다. 이와같이 본조사를 통하여 본 해송의 연륜폭(年輪幅) 및 최대밀도(最大密度), DD는 오염으로 인한 생장저해(生長沮害)의 지표(指標)로서 이용할 수 있다고 추측되었다.

  • PDF

충북지역 주요 수종의 연륜생장량 특성에 관한 연구 (Annual Tree Ring Growth Characteristics for Major Species in Chungbuk Province)

  • 서연옥;이영진;박상문;표정기;정진현;김성호;최정기;이우균;정동준;문현식
    • 농업생명과학연구
    • /
    • 제43권6호
    • /
    • pp.1-6
    • /
    • 2009
  • 본 연구는 2007년도 조사된 국가산림자원조사 자료를 이용하여 충북지방에 분포하는 주요 수종에 대하여 평균 연륜생장량과 연륜생장량에 영향을 미치는 인자들과의 상관관계를 분석하고자 하였다. 충북지역에서 조사된 고정표본점은 총 56개소로 다양한 수종이 분포하였으며 그 중 개체수 분포 비율이 높은 10개 수종에 대하여 총 800본의 연륜생장량이 조사된 목편 자료를 대상으로 분석하였다. 충북지방에서 평균 연륜생장량이 가장 높은 수종은 아까시나무(2.30mm/yr)로 나타났고, 그 다음으로는 졸참나무(2.27mm/yr)>산벚나무(1.98mm/yr)>일본잎갈나무(1.98mm/yr) 순으로 나타났다. 대부분 주요 수종들의 경우, 영급과 임분밀도가 증가함에 따라 평균 연륜생장량은 감소하는 경향으로 나타났다.

바이올린용 소재의 진동모드 해석에 관한 연구 -제2보. 소재 연륜폭 및 절삭방향이 브릿지의 공진주파수에 미치는 영향 (Studies on the vibrational modal analysis of solid woods for the violin making II, Effect of annual ring width and cutting direction on the resonant frequency of the bridges)

  • 정우양
    • 한국가구학회지
    • /
    • 제16권1호
    • /
    • pp.17-23
    • /
    • 2005
  • European maple is famous for the optimum solid wood for making bridge which is the most important part in violin acoustics. This study was carried out to investigate the variation of main features, i. e. annual ring width and cutting direction of costly imported violin bridge blanks and to examine the effect of these features of the blanks on the vibrational characteristics of bridge blanks. Imported violin bridge blanks had somewhat large variation in major macroscopical and physical properties and there was little relationship between annual ring density and weight of maple blanks. Resonant frequency of violin bridge blanks had some positive correlation with weight, however, damping having negative relationship with frequency was seldom affected by any physical properties of the maple blanks. Deviation from the radial cutting of tail side(ray direction from top toward feet on the edge of bridge blank) lowered the resonant frequency. Consequently, weight and ray direction should be taken for the critical quality decisive factors(QDF) of incoming bridge blanks by not only inspectors also luthiers who tune the bridge by shaping and are responsible for the final timbre quality of this complicate instrument.

  • PDF

주요(主要) 침엽수(針葉樹) 조림목(造林木)의 재질변이(材質變異)에 관한 연구(硏究)(I) - 잣나무, 낙엽송(落葉松), 편백(扁栢)의 해부적(解剖的) 성질(性質) - (Variations in Properties and Qualities of Major Plantation-grown Softwoods in Korea(I) - Anatomical Properties of Pinus koraiensis, Larix leptolepis, and Chamaecyparis obtusa -)

  • 이찬호;박정환;김영채
    • Journal of the Korean Wood Science and Technology
    • /
    • 제25권2호
    • /
    • pp.117-126
    • /
    • 1997
  • In fast grown softwood, there are very large changes in material properties going outward from the pith to bark such as anatomical, physical and mechanical characteristics. Some of variations in anatomical properties with annual ring were then examined from Pinus koraiensis, Larix leptolepis, and Chamaecyparis obtusa, which are major softwoods of plantation in Korea. The large variations of annual ring width during young age of tree tended to stabilize after 25year through the transitional period in 17~23year. The ring density was 1.5~2.4 in 1~10year period, and 3.5~6.3 in 30~35year period, in which juvenile and mature wood were certainly assumed to be formed, respectively. Variations of tracheid length showed functional relationships with annual rings as logarithm. Demarcation between juvenile wood and mature wood could be 16~19year, which was determined from increase rate of tracheid length of 0.2%. Cell wall thickness increased with increase of annual ring even though large variations were observed as well. Variations of cell wall thickness within species were pronounced in latewood than earlywood. The increase of cell wall thickness from juvenile wood to mature wood was predominant in Larix leptolepis as 2.0times, and least in Chamaecyparis obtusa as 1.1 times. Cell diameters showed trends of increase during young age of 1~15year, and consistent afterward. The variations of cell diameter between radial and tangential direction were greater in latewood, and most pronounced in Chamaecyparis obtusa.

  • PDF

신갈나무의 인장응력재와 대응재의 해부학적 특성 (Some Anatomical Characteristics in Tension and Opposite Woods of Quercus mongolica Fischer)

  • 이승환;황원중;김남훈
    • Journal of the Korean Wood Science and Technology
    • /
    • 제25권3호
    • /
    • pp.43-49
    • /
    • 1997
  • The lengths of fibers and vessel elements, vessel diameters, and ray spacings of tension and opposite woods in Quercus mongolica Fischer and their radial variations were examined. Crystallinity indices and crystallites orientations of tension, opposite and lateral woods were also investigated. The lengths of fibers and vessel elements, and ray spacings of tension wood were longer and denser than those of opposite wood, respectively. In the latewood, the vessels of tension wood had a little larger diameters than those of opposite wood. whereas the vessel diameters of earlywood were similar in both woods. With the exception of vessel diameters of earlywood, there were differences between tension and opposite woods in all anatomical characteristics examined. In the radial variation pattern, the fiber lengths of both woods increased markedly to about 15th annual ring and thereafter remained virtually constant. The vessel element lengths of earlywood in tension wood increased to certain annual ring and thereafter were stabilized, but opposite wood had a relatively constant trend from pith to bark. Those of late wood in both woods increased to certain annual ring and thereafter showed constant patterns. Vessel diameters appeared to show similar trend in both woods. Ray spacings decreased to about 15 annual ring and thereafter were stabilized in both woods. In the fine structures, tension wood had higher crystallinity index and better crystallites orientation than opposite and lateral woods.

  • PDF

황장목(黃腸木)의 해부학적 특성 (Anatomical Characteristics of Yellow-Hearted Pine (Pinus densiflora for. erecta Uyeki))

  • 이애희;장재혁;박병호;김남훈
    • Journal of Forest and Environmental Science
    • /
    • 제30권1호
    • /
    • pp.56-61
    • /
    • 2014
  • Macroscopic and microscopic characteristics of Yellow-hearted pine and Red pine were investigated. Wood color, annual ring width and latewood percentage were observed by the naked eye. Anatomical properties as the structure of three sections and cell dimensions were examined by an optical microscopy. As a result, the color of bark in Yellow-hearted pine was Reddish-grey, and Red pine showed brown or gray. The color of heartwood and sapwood in Yellow-hearted pine was deep-yellow to brown and creamy-white. And the color of heartwood and sapwood in Red pine was light-brown and light-yellow. The annual ring width of Yellow-hearted pine was narrower than that of Red pine, and the latewood percentage of Yellow-hearted pine was a little higher than that of Red pine. There was no significant difference in the anatomical characteristics between Yellow-hearted pine and Red pine.

Microfibril Angle Characteristics of Korean Pine Trees from Depending on Provinces

  • KIM, Ji-Yeol;KIM, Soo-Chul;KIM, Byung-Ro
    • Journal of the Korean Wood Science and Technology
    • /
    • 제48권4호
    • /
    • pp.569-576
    • /
    • 2020
  • This study investigated the characteristics of microfibril angle(MFA) in order to see if there was any difference in pine tree lumber quality among the three mountain areas surrounding the Taebaek Mountains in Korea - Yeongdong (Goseong-gun), Yeongseo (Hongcheon-gun) and Yeongnam (Bonghwa-gun). Pine trees of each mountain area were divided into earlywood and latewood in relation to heartwood part (1959 ~ 1961, 3 annual rings) and sapwood part (2002 ~ 2004, 3annual rings), and measured at tangential section. The microfibril angle showed significant differences between mountain areas. In general, Goseong Mountain was found to have 37.35°, followed by Hongcheon Mountain 32.42° and Bonghwa Mountain 25.75°, in order. The sapwood part had larger angle than heartwood part; and earlywood, than latewood. Variation within a single annual ring tended to be smaller from earlywood toward latewood.