• Title/Summary/Keyword: Annual ring characteristics

Search Result 39, Processing Time 0.025 seconds

Annual Precipitation Reconstruction Based on Tree-ring Data at Seorak (설악산 지역의 Tree-ring 자료를 이용한 연 강수량 재생성)

  • Kwak, Jae Won;Han, Heechan;Lee, Minjung;Kim, Hung Soo;Mun, Jangwon
    • Journal of Korean Society on Water Environment
    • /
    • v.31 no.1
    • /
    • pp.19-28
    • /
    • 2015
  • The purpose of this research is reconstruction of annual precipitation based on Tree-ring series at Seorak mountain and examine its effectiveness. To do so we performed nonlinear time series characteristics test of Tree-ring series and reconstructed annual precipitation of Gangneung from 1687 to 1911 using Artificial neural network and Nonlinear autoregressive exogeneous input (NARX) model which reflects stochastic properties. As a result, Tree-ring series at Seorak Mountain shows nonlinear time series property and reconstructed annual precipitation series drawn from NARX is similar in statistical characteristics of observed annual time series.

Effect of specific gravity and annual ring width on the acoustical properties of European lumber used in violin making (유럽산 바이올린 용재의 비중과 년륜폭이 소재의 음향적 성질에 미치는 영향)

  • 정우양;홍병화
    • Journal of the Korea Furniture Society
    • /
    • v.10 no.1
    • /
    • pp.57-63
    • /
    • 1999
  • This study was carried out to analyze the relationship between basic physical properties and acoustical characteristics of imported violin wood and to offer the information on raw material procurement and incoming-material quality control to domestic violin makers which have purchased most raw materials from European exporting countries at high expense. Equilibrium moisture content of European spruce with lower specific gravity after the prolonged storage was rather higher than that of European maple with higher specific gravity. The specific gravity of spruce increased with decreasing annual ring width, however, that of narrower annual ring. Increasement in specific gravity enhanced the dynamic Young's modulus of both wood species, but influenced the vibration energy loss by internal friction differently between two species. For dynamic MOE, qurater-sawn spruce was higher than the flat-sawn, but maple showed the reverse directional characteristics. Consequently, it would be well for violin makers to establish the standard for materials and quality control system to assure the quality of their violin products.

  • PDF

Studies on Wood Quality of Pinus koraiensis Sieb. et Zucc. (III) - On Annual Ring Width and Summer Wood Percentage - (잣나무의 재질(材質)에 관(關)한 연구(硏究) (제(第) III 보(報)) - 연륜폭(年輪幅)과 추재율(秋材率) -)

  • Lee, Won Yong
    • Journal of Korean Society of Forest Science
    • /
    • v.24 no.1
    • /
    • pp.25-44
    • /
    • 1974
  • In the present paper I described the results of the observations made on the visual characteristics such as the annual ring width and summerwood percentage of Pinus koraiensis Sieb. et Zucc. grown at out university forest. The results of the study are as follows: Characteristics of annual ring width and summerwood percentage 1. The range of dispersion of annual ring width and summerwood percentage are respectively 0.5-6.5mm and 5-50% on the normal wood and its arithmetic mean values are each 3.0mm and 24% on all sample trees. 2. The values of annual ring width of heart wood are larger than that of sapwood but on the contrary the values of summerwood percentage of heartwood are smaller than that of sapwood. On the other hand variations of these values are distingushed on the heartwood. 3. The values of annual ring width due to the parts of stem with crown. with clear length and at bottom showed that the largest values are given at the parts of stem with crown. But on the contrary the summerwood percentage values are largest at the parts of stem at bottom on all sample trees. 4. The values of annual ring width and summerwood percentage depending on the stand sides are not obvious. Horizontal and vertical variations of annual ring width and summerwood percentage 5. It was recognized that horizontal (radial direction) variations of annual ring width and summerwood percentage indicated two different patterns (the region of large fluctuation and that of small fluctuation) in a tree stem. These boundaries are seemed to appear at the parts of 12-15 annual rings from pith. 6. According to the increase of height in tree the values of annual ring width increase but the values of summerwood percentage gradually decrease. 7. But vertical variations of annual ring width and summerwood percentage on the sapwood are divided into two different parts (region of increased or decreased upwards and that of remained constant in successive height) in a tree stem and these limits are seemed to appear at the 7m of height in trees. Relations between annual ring width and summerwood percentage 8. The modes of summerwood percentage related with annual ring width are seemed to appear almost in the definite range (10-25%). 9. The relations between annual ring width and summerwood percentage show a highly negatine correlation on all sample trees.

  • PDF

Characteristics of Annual Rings of Pinus thunbergii Grown in the Air-polluted Area by Soft X-ray Analysis (Soft X-ray분석(分析)에 의한 대기오염지역(大氣汚染地域)에서 자란 해송(Pinus thunbergii)의 연륜(年輪)의 특징(特徵))

  • Kim, Jong Kab;Kim, Jai Saing
    • Journal of Korean Society of Forest Science
    • /
    • v.80 no.4
    • /
    • pp.351-359
    • /
    • 1991
  • Annual ring characteristics of pinus thunbergii grown in several air-polluted areas were investigated by soft X-ray densitometry. Ring width, maximum density and relative difference between maximum and minimum density(abbreviated to DD) were generally decreased after the beginning of operation of the factories at the vicinity of the pollution sources. Especially at the nearest areas of the industrial complex, those were distinctly decreased, and the changes, either increases or decreases, in percentage of latewood and minimum density could not be explained by the air pollution dosages. Ring width, maximum density and DD were being more apparently decreased after 5 years than those for 5 years after the beginning of operation, and also the rate of decrease was increased from after 5 years after the beginning of operation, and the rate of decrease of ring width was the highest of all. It was inferred that ring width, maximum density and DD of Pinus thunbergii could be used as indicators to detect the growth damage by air pollution.

  • PDF

Annual Tree Ring Growth Characteristics for Major Species in Chungbuk Province (충북지역 주요 수종의 연륜생장량 특성에 관한 연구)

  • Seo, Yeon-Ok;Lee, Young-Jin;Park, Sang-Moon;Pyo, Jung-Kee;Jeong, Jin-Hyun;Kim, Sung-Ho;Choi, Jung-Kee;Lee, Woo-Kyun;Chung, Dong-Jun;Moon, Hyun-Shik
    • Journal of agriculture & life science
    • /
    • v.43 no.6
    • /
    • pp.1-6
    • /
    • 2009
  • The purpose of this study was to analyze annual tree ring growth characteristics for major tree species distributed in Chungbuk province. A total of 800 sample trees from 56 permanent sampling plots measured by the 5th Korean National Forest Inventory Program in 2007 was used for the calculation of annual growth rates. According to the results of this study, the species of Robinia pseudoacacia(2.30mm/yr) showed the best annual tree ring growth rates and the others are Quercus serrata(2.27mm/yr)>Prunus sargentii(1.98mm/yr)> and Larix leptolepis(1.98mm/yr) in order. Most of the major tree species in Chungbuk province, as tree age and stand density increased, annual tree ring growth rates tended to decreased. This information could be very useful for forest managers to understand annual tree ring growth characteristics in Chungbuk province.

Studies on the vibrational modal analysis of solid woods for the violin making II, Effect of annual ring width and cutting direction on the resonant frequency of the bridges (바이올린용 소재의 진동모드 해석에 관한 연구 -제2보. 소재 연륜폭 및 절삭방향이 브릿지의 공진주파수에 미치는 영향)

  • Chung Woo-Yang
    • Journal of the Korea Furniture Society
    • /
    • v.16 no.1
    • /
    • pp.17-23
    • /
    • 2005
  • European maple is famous for the optimum solid wood for making bridge which is the most important part in violin acoustics. This study was carried out to investigate the variation of main features, i. e. annual ring width and cutting direction of costly imported violin bridge blanks and to examine the effect of these features of the blanks on the vibrational characteristics of bridge blanks. Imported violin bridge blanks had somewhat large variation in major macroscopical and physical properties and there was little relationship between annual ring density and weight of maple blanks. Resonant frequency of violin bridge blanks had some positive correlation with weight, however, damping having negative relationship with frequency was seldom affected by any physical properties of the maple blanks. Deviation from the radial cutting of tail side(ray direction from top toward feet on the edge of bridge blank) lowered the resonant frequency. Consequently, weight and ray direction should be taken for the critical quality decisive factors(QDF) of incoming bridge blanks by not only inspectors also luthiers who tune the bridge by shaping and are responsible for the final timbre quality of this complicate instrument.

  • PDF

Variations in Properties and Qualities of Major Plantation-grown Softwoods in Korea(I) - Anatomical Properties of Pinus koraiensis, Larix leptolepis, and Chamaecyparis obtusa - (주요(主要) 침엽수(針葉樹) 조림목(造林木)의 재질변이(材質變異)에 관한 연구(硏究)(I) - 잣나무, 낙엽송(落葉松), 편백(扁栢)의 해부적(解剖的) 성질(性質) -)

  • Lee, Chan-Ho;Park, Jung-Hwan;Kim, Yong-Chae
    • Journal of the Korean Wood Science and Technology
    • /
    • v.25 no.2
    • /
    • pp.117-126
    • /
    • 1997
  • In fast grown softwood, there are very large changes in material properties going outward from the pith to bark such as anatomical, physical and mechanical characteristics. Some of variations in anatomical properties with annual ring were then examined from Pinus koraiensis, Larix leptolepis, and Chamaecyparis obtusa, which are major softwoods of plantation in Korea. The large variations of annual ring width during young age of tree tended to stabilize after 25year through the transitional period in 17~23year. The ring density was 1.5~2.4 in 1~10year period, and 3.5~6.3 in 30~35year period, in which juvenile and mature wood were certainly assumed to be formed, respectively. Variations of tracheid length showed functional relationships with annual rings as logarithm. Demarcation between juvenile wood and mature wood could be 16~19year, which was determined from increase rate of tracheid length of 0.2%. Cell wall thickness increased with increase of annual ring even though large variations were observed as well. Variations of cell wall thickness within species were pronounced in latewood than earlywood. The increase of cell wall thickness from juvenile wood to mature wood was predominant in Larix leptolepis as 2.0times, and least in Chamaecyparis obtusa as 1.1 times. Cell diameters showed trends of increase during young age of 1~15year, and consistent afterward. The variations of cell diameter between radial and tangential direction were greater in latewood, and most pronounced in Chamaecyparis obtusa.

  • PDF

Some Anatomical Characteristics in Tension and Opposite Woods of Quercus mongolica Fischer (신갈나무의 인장응력재와 대응재의 해부학적 특성)

  • Lee, Seung-Hwan;Hwang, Won-Jung;Kim, Nam-Hun
    • Journal of the Korean Wood Science and Technology
    • /
    • v.25 no.3
    • /
    • pp.43-49
    • /
    • 1997
  • The lengths of fibers and vessel elements, vessel diameters, and ray spacings of tension and opposite woods in Quercus mongolica Fischer and their radial variations were examined. Crystallinity indices and crystallites orientations of tension, opposite and lateral woods were also investigated. The lengths of fibers and vessel elements, and ray spacings of tension wood were longer and denser than those of opposite wood, respectively. In the latewood, the vessels of tension wood had a little larger diameters than those of opposite wood. whereas the vessel diameters of earlywood were similar in both woods. With the exception of vessel diameters of earlywood, there were differences between tension and opposite woods in all anatomical characteristics examined. In the radial variation pattern, the fiber lengths of both woods increased markedly to about 15th annual ring and thereafter remained virtually constant. The vessel element lengths of earlywood in tension wood increased to certain annual ring and thereafter were stabilized, but opposite wood had a relatively constant trend from pith to bark. Those of late wood in both woods increased to certain annual ring and thereafter showed constant patterns. Vessel diameters appeared to show similar trend in both woods. Ray spacings decreased to about 15 annual ring and thereafter were stabilized in both woods. In the fine structures, tension wood had higher crystallinity index and better crystallites orientation than opposite and lateral woods.

  • PDF

Anatomical Characteristics of Yellow-Hearted Pine (Pinus densiflora for. erecta Uyeki) (황장목(黃腸木)의 해부학적 특성)

  • Lee, Ae-Hee;Jang, Jae-Hyuk;Park, Byung-Ho;Kim, Nam-Hun
    • Journal of Forest and Environmental Science
    • /
    • v.30 no.1
    • /
    • pp.56-61
    • /
    • 2014
  • Macroscopic and microscopic characteristics of Yellow-hearted pine and Red pine were investigated. Wood color, annual ring width and latewood percentage were observed by the naked eye. Anatomical properties as the structure of three sections and cell dimensions were examined by an optical microscopy. As a result, the color of bark in Yellow-hearted pine was Reddish-grey, and Red pine showed brown or gray. The color of heartwood and sapwood in Yellow-hearted pine was deep-yellow to brown and creamy-white. And the color of heartwood and sapwood in Red pine was light-brown and light-yellow. The annual ring width of Yellow-hearted pine was narrower than that of Red pine, and the latewood percentage of Yellow-hearted pine was a little higher than that of Red pine. There was no significant difference in the anatomical characteristics between Yellow-hearted pine and Red pine.

Microfibril Angle Characteristics of Korean Pine Trees from Depending on Provinces

  • KIM, Ji-Yeol;KIM, Soo-Chul;KIM, Byung-Ro
    • Journal of the Korean Wood Science and Technology
    • /
    • v.48 no.4
    • /
    • pp.569-576
    • /
    • 2020
  • This study investigated the characteristics of microfibril angle(MFA) in order to see if there was any difference in pine tree lumber quality among the three mountain areas surrounding the Taebaek Mountains in Korea - Yeongdong (Goseong-gun), Yeongseo (Hongcheon-gun) and Yeongnam (Bonghwa-gun). Pine trees of each mountain area were divided into earlywood and latewood in relation to heartwood part (1959 ~ 1961, 3 annual rings) and sapwood part (2002 ~ 2004, 3annual rings), and measured at tangential section. The microfibril angle showed significant differences between mountain areas. In general, Goseong Mountain was found to have 37.35°, followed by Hongcheon Mountain 32.42° and Bonghwa Mountain 25.75°, in order. The sapwood part had larger angle than heartwood part; and earlywood, than latewood. Variation within a single annual ring tended to be smaller from earlywood toward latewood.