• KDI Journal of Economic Policy
• /
• v.34 no.1
• /
• pp.53-85
• /
• 2012

This paper empirically investigates the rates of embodied technological change and their relative contributions to total factor productivity growth for manufacturing, using the Korean plant-level manufacturing data for the period of 1985-2003. We adopt a production-based estimation method proposed by Sakellaris and Wilson (2004) in order to examine the marginal productivity increase of each vintage of equipment over time. We find that the rate of embodied technological progress of Korea's manufacturing sector maintains the annual average level of 13.7 percent from 1985 to 2003, slightly lower than 16.9 percent of the U.S., estimated by Sakellaris & Wilson (2004). While the rate recorded a remarkable increase after the 1997 financial crisis, IT-producing and IT-using industries achieved higher rates of embodied technological progress than non-IT counterparts.

• Journal of Forest and Environmental Science
• /
• v.33 no.2
• /
• pp.136-146
• /
• 2017

We selected 6 plots ($100m^2$) located 2.2-3.8 km from Minamidake Crater on the north flank of Sakurajima Volcano. We conducted a field study to investigate the effects of volcanic activity on vegetation succession and surface erosion rate. The results showed that trees growing in plots further from the crater had a greater diameter at breast height (DBH), total height, and age. In addition, these plots had a greater number of woody plants and species, as well as a greater total cross-sectional area at breast height. The Fisher-Williams index of diversity (${\alpha}$) and the proportion of evergreen broad-leaved trees were higher in plots located further from the crater. Vegetation succession in these plots was not at the level of a climax forest. From 1972 to 2015, the timing for active volcano, the depth of volcanic ash layer, the dry density, and the pH of ground surface were lower for plots located further from the crater. Furthermore, the average annual sheet erosion from 1972 to 2015 was also lower for plots located further away from the crater. Overall, plots further away from the crater have a better environment for vegetation growth and a lower dry density of the volcanic ash surface layer. It is thought that lower dry density results in increased soil permeability, which impedes surface flow. In order to prevent debris-flow disasters, caused by mud and rock flow resulting from impaired soil penetrability, it is essential to promote soil development and restore penetrability by artificial vegetation restoration.

• Journal of Korean Society on Water Environment
• /
• v.30 no.6
• /
• pp.673-682
• /
• 2014

A watershed model was constructed using Hydrological Simulation Program Fortran to predict the water temperature at major tributaries of Nakdong River basin, Korea. Water temperature is one of the most fundamental indices used to determine the nature of an aquatic environment. Most processes of an aquatic environment such as saturation level of dissolved oxygen, the decay rate of organic matter, the growth rate of phytoplankton and zooplankton are affected by temperature. The heat flux to major reservoirs and tributaries was analyzed to simulate water temperature accurately using HSPF model. The annual mean heat flux of solar radiation was estimated to $150{\sim}165W/m^2$, longwave radiation to $-48{\sim}-113W/m^2$, evaporative heat loss to $-39{\sim}-115W/m^2$, sensible heat flux to $-13{\sim}-22W/m^2$, precipitation heat flux to $2{\sim}4W/m^2$, bed heat flux to $-24{\sim}22W/m^2$ respectively. The model was calibrated at major reservoir and tributaries for a three-year period (2008 to 2010). The deviation values (Dv) of water temperature ranged from -6.0 to 3.7%, Nash-Sutcliffe efficiency(NSE) of 0.88 to 0.95, root mean square error(RMSE) of $1.7{\sim}2.8^{\circ}C$. The operational water temperature forecasting results presented in this study were in good agreement with measured data and had a similar accuracy with model calibration results.

• Environmental and Resource Economics Review
• /
• v.19 no.2
• /
• pp.341-360
• /
• 2010

The goal of this study is to forecast the scales of seaborne trade of iron ore and coal. It is assumed that the seaborne trade of iron ore is the function of two independent variables(crude steel production, world GDP) and the seaborne trade of coal is the function of two independent variables(crude steel production, world electricity generation). The result shows that the regressions of two functions are statistically significant respectively. As the results of forecasting, the seaborne trade of iron ore in 2010 may be 892 million tons which is increased 5.1% compare to the level of 2009. Also the seaborne trade of coal in 2010 may be 827 million tons which is increased 6.1% compare to the level of 2009. In terms of the compound annual growth rate, it is forecasted that the iron ore may show 4.7% of increasing rate from 2009 to 2015 and the seaborne trade of coal may be increased 6.1% annually for the same period.

• Journal of The Korean Society of Integrative Medicine
• /
• v.6 no.4
• /
• pp.149-169
• /
• 2018

Purpose : This study was to develop a strategy for modeling future workforce projections to serve as a basis for analyzing annual supply of and demand for physical therapists across the South Korea into 2030. Methods : In-and-out movement model was used to project the supply of physical therapists. The demand was projected according to the demand-based method which consists of four-stages such as estimation of the utilization rate of the base year, forecasting of health care utilization of the target years, forecasting of the requirements of clinical physical therapists and non-clinical physical therapists based on the projected physical therapists. Results : Based on the current productivity standards, there will be oversupply of 39,007 to 40,875 physical therapists under the demand scenario of average rate in 2030, undersupply of 44,663 to 49,885 under the demand scenario of logistic model, oversupply of 16,378 to 19,100 under the demand scenario of logarithm, and oversupply of 18,185 to 20,839 under the demand scenario of auto-regressive moving average (ARIMA) model in 2030. Conclusion : The result of this projection suggests that the direction and degree of supply of and demand for physical therapists varied depending on physical therapists productivity and utilization growth scenarios. However, the need for introduction of a professional physical therapist system and the need to provide long-term care rehabilitation services are actively being discussed in entering the aging society. If community rehabilitation programs for rehabilitation of disabled people and the elderly are activated, the demand of physical therapists will increase, especially for elderly people. Therefore, healthcare policy should focus on establishing rehabilitation service infrastructure suitable for an aging society, providing high-quality physical therapy services, and effective utilization of physical therapists.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.4
• /
• pp.309-315
• /
• 2015

In order to identify the causes of various problems related to forage crop growth, such as winter survival, coldness, rainfall, drought etc., and to provide basic data for the stable production and supply of forage year round, we performed a growth survey after the wintering of winter forage crops grown from mid-Sep. 2014 to late-Feb. 2015. The growth of winter forage crops after wintering in the country was generally bad. As shown in the regional distribution in the country, regions with 80% or higher winter survival rates comprised 66%, regions with 79 to 50% winter survival comprised 24.9% and regions with less than 50% winter survival comprised 9.1%. In conclusion, the average winter survival rate was 79% in the country. Winter survival rate and coverage rate after the wintering of winter forage crops under installed drain channels in paddy fields were good at 83% and 80%, respectively. However, the rates without installed drain channels were bad at 67% and 66%, respectively. It was predicted that the crop production of winter forage crops was reduced by 10-15% in Gangwon, Chungbuk, Chungnam, Gyeongnam and Jeonnam regions, reduced by 30% in Gyeonggi, Gyeongbuk and Jeonbuk regions and reduced overall by approximately 19% nationwide.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.226-236
• /
• 1999

Growth, reproduction, mortality, and production of Laminaria japonica were experimentally studied at a cultivation ground on the coast of llkwang, where the largest amount of cultivated Laminaria has been produced in Korea. For this experiment, young sporophytes (0.33 cm in mean length) grown in the laboratory were transplanted at the depth of 3 m and field surveys on them were conducted twice a month from December, 1995 to August, 1996. Plants exhibited an annual life span; they were completely dead by August. Frond width, thickness, and wet weight showed similar pattern of seasonal growth and reached their maxima in July, but frond length showed no more increment after May. Maximum mean frond length and weight were 199.8 cm and 333.0 g wet wt., respectively. Overall meristematic growth in length and weight were 384.0 cm and 393.6 g wet wt., respectively. Absolute growth rates (AGR) which were calculated from the length of tissue developed from meristem varied seasonally; AGR of length and weight reached maxima in March (3.6 $cm{\cdot}d^{-1}$) and May (3.8 g wet $wt{\cdot}d^{-1}$), respectively. Absolute attrition rates gradually increased from February to July. Seasonal differences in growth and attrition rates appeared to be related to seawater temperature and nitrogen concentration in seawater. Reproductive sporophytes bearing sprorangium sorus began to occur from April, and the ratio of sorus area to blade area reached its maximum in July (0.034). Survival rate was exponentially decreased; more than 90% of plants decayed within 56 days after outplanting. After February, mortality was size-specific; mortality of smaller plants less than 30 cm in length were relatively higher. Maximum biomass occured in July (285.6 kg wet $wt{\cdot}m^{-2}$) and annual production was 758.7 kg wet $wt{\cdot}m^{-2}$.

• Journal of Korean Society of Forest Science
• /
• v.80 no.2
• /
• pp.202-209
• /
• 1991

This study was carried out to examine seed germination, seedling growth, and biomass production of Eucommia ulmoides. The results were summarized as follows ; 1. Cold moist stratification at a refrigerator showed 60.3% of seed germination, which is the most effective among pretreatment methods. 2. In case of 1-0 seedlings, sixty seedlings per $1m^2$ was the most appropriate density, and the growth quality of seedlings differed significantly among densities. 3. Height growth showed continuous growth pattern and the maximum growth was shown during the period 21 June to 20 July, which corresponds 32.7% of total annual growth. 4. As tree age and DBH increased, the production of bark and leaf increased, however, its increment rate remarkably dropped down after ten years. 5. When tree age was ten years, the rate of bark volume showed the maximum value, 12.42%. 6. Dry weight of barks and leaves and bark volume were positively related to the growth of DBH and height. 7. As tree age increased, leaf area decreased, but the number of leaves increased.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.9-21
• /
• 1983

The structures of oak stands were studied in relation to their productivity. Three plots classified by the site quality following to altitude, were selected on the oak stand located at Naryongri Eunsanmyun Buyeogun. The site qualities of the stand studied were generally estimated to be moderate in respect to some soil physical and chemical properties. Quercus variabilis was dominant species in the vegetation composition of the stand studied. The crown densities of the stand were varied from 65.4% in plot I to 78.2% in plot III and the parts, occupied with oak trees, ranged from 44.4% in plot I to 65.9% in plot III in the density. In the contrast to crown density, the growing stocks of oak trees ranged from $3.937m^3$ in plot I (73.4% of plot total) to $2.075m^3$ in plot III (84.3% of plot total). The occupied ratios, measured by crown class, exhibited dissimilarity between crown projection area and volume, and also the ratios brought into different patterns by plot. Highly significant correlations were proved between crown projection areas and volumes of individual oak trees by plot, but not proved in the relations by crown class. The cumulative growth, current annual increment and mean annual increment displayed various patterns by plot and by crown class in the heights, D. B. H. s and volumes of oak trees. The maximum values of current annual increment of height were generally recorded in 10 to 20 years, earlier than those of D. B. H. The mean annual increment of height, D. B. H. and volume maintained similar levels after about 10 years and fluctuated irregularly. The crown projection area and volume following to thinning decreased in the order of the thinning methods of grade A < grade B < crown thinning$90m^3/ha$ in about 40 years in the productivity of volume of the oak stand studied.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.82-87
• /
• 1983

The aging and growth of Spisula sachalinensis from Ingu over the period from December 1981 through November 1982 were studied. The rings on the shell were used as the character for age determination. The ring where the translucent zone shifts to the opaque one was regarded as an annulus. The time of its formation was estimated by monthly variations of marginal growth rate in the shell. It was formed once a year over the period from August through September. The shell length at the formation of the annulus was estimated by taking the mean shell length corresponding to each of the annual ring. From analysis of mean shell length at the formation of the annulus, von Bertalanffy's growth equation was estimated as follows; $l_t=126.38(1-e^{-0.262(t-0.656)})\;W_t=485.85(1-e^{-0.262(t-0.656)})^3$ Back-calculated shell lengths estimated from this equation was quite consistent with actual shell lengths.