• Journal of Korean Critical Care Nursing
• /
• v.8 no.1
• /
• pp.41-49
• /
• 2015

Purpose: The purpose of this study was to measure the noise levels in intensive care units (ICUs) and to analyze the causes of the noise and patient perceptions of the noise. Methods: Noise levels were recorded in adult ICUs for 24 h over a week from the patients' bedside with a sound level meter. Noise sources were categorized into three groups: medical equipment, health care providers, and the environment. Noises from the environment were recorded in an empty ICUs side room. Perceptions of the noise of 125 patients admitted to the ICUs were recorded using a questionnaire. Results: The mean level of noise in the ICUs was 58.5 dBA (range: 34.2-80.2 dBA). The causes of noise higher than 70 dBA were nebulizers and infusion/syringe pumps among medical equipment, and drawer slamming, phone ringing, and stripping packages of medical fluids among environmental noises. According to the questionnaire, 64.0% of the patients responded that the ICUs were noisy and that they suffered from sleep disturbance because of the noise. Conclusion: Noise is considerably high in ICUs and is an annoying factor for the patients. Most noise sources are adjustable, and we should try to reduce noise whenever possible to make the ICUs environment more pleasant.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.633-638
• /
• 2002

The vacuum cleaner that has no dust bag generates very high level annoying noise. The dominant noise source is the 2$\^$nd/ BPF tone of the rotating impeller. In order to reduce the noise, we identify the acoustic characteristics and reduce the noise of the vacuum cleaner and centrifugal fan. The resonance phenomenon is observed in blade passages and we found out that the resonance frequency is very close to the 2$\^$nd/ BPF. In order to reduce this high-level peak noise, new impeller is designed in this paper. The trailing edge of new impeller is inclined and this makes the flow interactions between the rotating impeller and the stationary diffuser vane occurs with some phase shift. The performance of new impeller is similar to the old one but the overall SPL is reduced about 3.6dBA. The SPL of BPF is reduced about 6dBA and 2$\^$nd/ BPF is reduced about 20dBA. The vacuum cleaner, which uses newly developed centrifugal fan, generate more comfortable noise than the old model and the strong tonal sound was dramatically reduced.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.12
• /
• pp.608-615
• /
• 2003

This paper describes an implementation of a DSP (Digital Signal Processor) controlled random carrier frequency modulation for the PWM inverter for acoustic noise reduction of induction motors. Real-time generation of the random variable and RPWM(Random PWM) along with the speed control was achieved by DSP TMS320C31. The experimental results show that the voltage and current harmonics are spread to a wide band area and the power spectrum of the acoustic switching noise was spread to create a more appealing, less annoying sound. Also, the speed response of the implemented method and the conventional method is nearly similar to each other from the viewpoint of the v/f constant control.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.1003-1008
• /
• 2004

In our life, we have used many digital appliances. They helped us to improve the quality of lift but sometimes gave us unsatisfactory result because they produce specific noise. Especially a vacuum cleaner produces a great deal of noise that is very annoying. So we need to study what sound metrics affect human sensibility. In this paper, we will study sound quality index for vacuum cleaner. The subjective evaluation of vacuum cleaner sound can be indicated to objective parameters by sound metrics of psychoacoustics. The artificial neural network can estimate the nonlinear characteristics of relation between subjective evaluation and sound metrics. We applied the artificial neural network to the development of sound quality index for vacuum sound.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.6
• /
• pp.391-398
• /
• 2015

The swing noise of an excavator is reduced in this study. When an excavator is under a swing motion, it produces the annoying noise which is required to be reduced. To identify the characteristics of the swing noise, the signals of noise and vibration from an excavator are measured during the swing motion. From the variation of the driving motor speed, the noise and vibration signals are picked up and plotted in the waterfall plots. From the waterfall plots, we identify the frequency components corresponding to the driving motor frequency, the gear mesh frequency of the planetary gear, and their harmonics. In addition, the natural frequencies and modes of the center frame are extracted by using the experimental modal test. It is found that the swing noise is amplified when the gear mesh frequencies coincide with the natural frequencies of the center frame. To reduce the swing noise, the structural modification is performed to the center frame. Finally, it is observed that the noise is considerably reduced by the structural modification.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.130-138
• /
• 2012

Environmental noise in the residential area is appeared with different types and features along with the growth of society. In particular when the economic level is raised up, the demand of residents for the environmental noise becomes more sensitive. The existing research on the environmental noise was initiated in the 1980's and resulted that the children's jumping sound was most annoying among the noises transmitted from the other unit. This result caused such activities that the researches were focused on the floor impact noise and that the laws in relation to environmental noise within residential area were revised strictly. This study aimed to survey the consciousness of residents for the environmental noise and to see how it is changed comparing with the previous one. Ultimately this result could be useful to establish the target for research or noise control to make the comfortable residential environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.572-577
• /
• 2011

Curve squealing of inter-city railway vehicle is a noise with high acoustic pressure and rather narrow frequency spectra. This noise turns out to be very annoying for the people living in the neighborhood of locations and the passenger in railway vehicle where this phenomenon occurs. Squealing is caused by a self-exited stick-slip oscillation in the wheel-rail contact. Curve squeal noise of railway vehicles that passed by a factor of the speed limit, so to overcome in order to improve running performance is one of the largest technology. In the present paper, characteristic of squeal noise behavior at the Hanvit-200 tilting train test-site. Curve squealing of railway wheels/rail contact occurs in R400~ R800 curves with a frequency range of about 4~11 kHz. If the curve is less than the radius of wheel frail contact due to |left-right| noise level difference (dBA) shows a significant effect of squeal noise were more likely.

• KIEAE Journal
• /
• v.9 no.1
• /
• pp.99-106
• /
• 2009

This study aims to survey the acoustical environment in the region around airport where there are various transportation noises such as aircraft noise, railway noise and traffic noise, and to analyze the subjective response on the noise to the people who live in house or work in office nearby airport. Measurement and subjective response evaluation were carried out at the same time and outdoor noise level was measured all day long to calculate one day results such as average Leq or one day WECPNL etc. The results showed that the military aircraft produces very high level comparing with commercial aircraft, for instance the sound level of commercial outdoor was lower than that of military aircraft indoor. Double and triple window were more effective for controlling the noise than single window, which showed the possibility of sound insulation treatment by installing windows having higher sound insulation performance. Finally the subjective response was resulted that the most annoying noise is from aircraft and counterplan they hope is 'airport moving out'. Leq 65 dB(A), the criteria value of sound insulation treatment, was corresponding to the subjective response of median annoyance '4' out of 7th scale.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.5
• /
• pp.520-526
• /
• 2016

Squeal noise is a typical brake noise that is annoying to both passengers and pedestrians. Its frequency range is fairly wide from 1 kHz to 18 kHz, which can be distressful to people. The brake squeal noise occurs due to various mechanisms, such as the mode coupling of the brake system, self-excited vibration, unstable wear, and others. In this study, several parameters involved in the generation of a squeal noise are investigated experimentally by using a brake noise dynamometer. The speed, caliper pressure, torque, and friction coefficient are measured as functions of time on the dynamometer. The contact pressure and temperature distributions of the disc and the pad are also measured by using a thermal imaging camera and a pressure mapping system. As a result of the simultaneous measurement of the friction coefficient and squeal amplitude as functions of the velocity, it is found that the onset of the squeal may be predicted from the ${\mu}-v$ curve. It is also found that a non-uniform contact pressure causes instability and, in turn, a squeal. Based on the analysis results, design modifications of the pad are suggested for improved noise characteristics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.606-607
• /
• 2008

Nowadays, noise and vibration phenomena of a disc brake system have been given various names that provide some definitions of sound and vibration emitted such as grind, grunt, moan, squeak, squeal, judder and wire brush. The most common and annoying noise of a disc brake system is squeal noise. It is defined as noise whose frequency content is 1 kHz and higher with excessively high and irrigating sound pressure levels. In this paper, the noise and vibration characteristics of a disc brake system have been investigated to develop the fusion-type friction material, which overcomes the low steel and non-asbestos organic friction materials. For the purpose, both experimental evaluation and complex eigenvalue analysis have been carried out.