• Korean Journal of Agricultural Science
• /
• v.48 no.3
• /
• pp.455-464
• /
• 2021

This study was conducted to evaluate meat quality traits, proximate composition, fatty acid profile and sensory attributes of pork produced under free-range and semi-intensive pig rearing systems. Longissimus dorsi muscles from pork carcasses were taken just after the slaughtering of finishing pigs reared under semi-intensive and free-range systems to test the meat quality parameters (pH, color, water holding capacity, and cooking loss), proximate composition (moisture, protein, fat, and ash) and fatty acid profile. Furthermore, the organoleptic properties were evaluated using 30 untrained panelists. The results revealed that the system of rearing did not affect (p > 0.05) the proximate composition, water holding capacity, color, pH and cooking loss of pork along with the fatty acid composition except for vaccenic acid (p < 0.05). The monounsaturated fatty acid (MUFA) content was affected (p < 0.05) by the rearing system while no effects were observed on the unsaturated fatty acid: saturated fatty acid ratio and omega-six to omega-three fatty acids ratios (p > 0.05). No difference was observed (p > 0.05) concerning the sensory attributes although pork obtained from the free-range system had the highest scores. In conclusion, the system of rearing did not show a significant effect on the meat quality parameters, composition and sensory attributes of pork obtained from cross-bred pigs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.7
• /
• pp.1036-1043
• /
• 2019

Objective: To investigate the color and oxidative stabilities of longissimus lumborum (LL) and psoas major (PM) muscles from grain-finished Bos indicus cattle in Brazil. Methods: The LL and PM muscles were obtained 24 h post-mortem from eight (n = 8) Nellore bull carcasses, fabricated into 1.5-cm steaks, aerobically packaged, and stored at $4^{\circ}C$ for nine days. Steaks were analyzed for myoglobin concentration, pH, instrumental color, metmyoglobin reducing activity (MRA) and lipid oxidation. Results: The LL steaks exhibited greater (p<0.05) redness, color stability, and MRA than their PM counterparts on days 5 and 9. The LL and PM steaks demonstrated similar (p>0.05) lightness and yellowness on days 0, 5, and 9. On the other hand, PM steaks exhibited greater (p<0.05) myoglobin concentration, pH, and lipid oxidation than their LL counterparts. Conclusion: These results indicated that muscle source influenced the color and oxidative stabilities of beef from grain-finished Bos indicus animals. These results highlighted the necessity of muscle-specific strategies to improve the color stability of beef from grain-fed Bos indicus cattle.

• Animal Bioscience
• /
• v.34 no.5
• /
• pp.914-921
• /
• 2021

Objective: The objective of this study was to compare growth performance, carcass traits and meat quality in young bulls, steers and heifers produced by crossing Limousin bulls with Holstein-Friesian cows, fattened semi-intensively and slaughtered at 18 months of age. Methods: Thirty-one young calves were reared in a conventional production system, and were fed milk replacer, hay and concentrate. At 6 months of age, the animals were divided into groups based on gender, and were fed a total mixed ration composed of grass silage, concentrates I and II in a semi-intensive production system. At the end of the fattening period (18 months), the animals were slaughtered, carcass quality was evaluated, and samples of musculus longissimus thoracis were collected to determine the proximate composition and quality of meat. Results: Bulls were characterized by the highest percentage share of the most valuable cuts in the carcass, and three-rib sections from bull carcasses had the highest lean meat content with low intramuscular fat content (0.93%). No significant differences in carcass conformation, dressing percentage or the percentage share of round in the right half-carcass were found between bulls vs. steers and heifers. Heifers and steers had higher carcass fat content than bulls, which had a positive influence on the sensory properties of beef. In comparison with the meat of bulls, the meat of steers and heifers was characterized by more desirable physical properties and sensory attributes (water-holding capacity, shear force, color lightness, aroma, juiciness, tenderness, flavor). Conclusion: Under the semi-intensive production system, heifers and steers had higher carcass fat content than bulls, which had a positive effect on the sensory properties of beef. Bulls are better suited for intensive systems, which contribute to improving the quality of their meat. The results of this study may encourage producers to breed steers and heifers for beef.

• Journal of Animal Science and Technology
• /
• v.65 no.2
• /
• pp.412-426
• /
• 2023

Currently, pigs breed in Korea are LYD (Landrace × Yorkshire × Duroc) crossbred pigs. Pigs used as fresh meat are gilts and barrows. However, the current supply of pork is not satisfying Korean consumers. In addition, the comparison of carcasses between gilts and barrows only studies carcass weight, backfat thickness, or meat quality, and there are very few studies comparing carcass characteristics. The purpose of this study was to compare characteristics of 7 primal cuts of gilts and barrows as measured by AutoFom III. A total of 350,179 pigs were used, including 176,461 gilts and 173,718 barrows. Characteristics of seven primal cuts were measured using AutoFom III. In the case of carcass weight, there was no significant difference in grade 1+. For all other survey items except for grade 2, gilts showed significantly (p < 0.05) higher values. For all grades except for pork belly, amounts of the remaining six primal cuts were higher in gilts (all p < 0.05,). In addition, the ratio of intermuscular fat in the pork belly of barrows showed a higher value than that in the pork belly of gilts (p < 0.05). The amount of pork belly, which is the most popular among consumers in Korea, not only produced more production than gilts in barrows, but also showed a higher value than gilts in barrows for the ratio of intermuscular fat affecting taste. In summary, gilts produced higher yields than barrows in all parts except pork belly. For the production of only pork belly, barrows showed higher production than gilts.

• Food Science of Animal Resources
• /
• v.43 no.4
• /
• pp.553-562
• /
• 2023

With an increase in meat consumption, the need to measure the weight of each primal cut of pork has increased. Recently, automation devices have been used to measure the weight of each primal cut of pork. The objective of this study was to investigate the accuracy of VCS2000, one of the non-invasive pig carcass analyzers. Production levels of 7 primal cuts of 50 pigs were measured with VCS2000. Average error rates between dissected value for each primal cut and VCS2000 measurement values of ham, shoulder picnic, belly, loin, and shoulder blade were around 5%. Average error rates for spare rib and tenderloin were about 10%. Correlation coefficients between the dissected value and the VCS2000 measured value for ham, shoulder picnic, loin, belly, and shoulder blade were high at 0.66-0.83. Correlation coefficients of spare rib and tenderloin were low at 0.35 and 0.47. Coefficient of determination of the VCS2000 measured value for each primal cut by regression analysis was 0.77 or more for ham, shoulder picnic, loin, and shoulder blade and 0.63 for belly. Coefficients of determination for spare rib and tenderloin were low at 0.40 and 0.27. In addition, the coefficient of determination of VCS2000 for each primal cut was higher than that of the dissected value for all primal cuts. In conclusion, pig carcass analysis using the VCS2000 has a high reliability for pork cuts with high production levels, but a relatively low reliability for pork cuts with low production levels and high fat levels.

• Animal Bioscience
• /
• v.36 no.9
• /
• pp.1453-1464
• /
• 2023

Objective: This study investigated the changes in bacterial communities within decomposing swine microcosms, comparing soil with or without intact microbial communities, and under aerobic and anaerobic conditions. Methods: The experimental microcosms consisted of four conditions: UA, unsterilized soil-aerobic condition; SA, sterilized soil-aerobic condition; UAn, unsterilized soil-anaerobic condition; and San, sterilized soil-anaerobic condition. The microcosms were prepared by mixing 112.5 g of soil and 37.5 g of ground carcass, which were then placed in sterile containers. The carcass-soil mixture was sampled at day 0, 5, 10, 30, and 60 of decomposition, and the bacterial communities that formed during carcass decomposition were assessed using Illumina MiSeq sequencing of the 16S rRNA gene. Results: A total of 1,687 amplicon sequence variants representing 22 phyla and 805 genera were identified in the microcosms. The Chao1 and Shannon diversity indices varied in between microcosms at each period (p<0.05). Metagenomic analysis showed variation in the taxa composition across the burial microcosms during decomposition, with Firmicutes being the dominant phylum, followed by Proteobacteria. At the genus level, Bacillus and Clostridium were the main genera within Firmicutes. Functional prediction revealed that the most abundant Kyoto encyclopedia of genes and genomes metabolic functions were carbohydrate and amino acid metabolisms. Conclusion: This study demonstrated a higher bacteria diversity in UA and UAn microcosms than in SA and SAn microcosms. In addition, the taxonomic composition of the microbial community also exhibited changes, highlighting the impact of soil sterilization and oxygen on carcass decomposition. Furthermore, this study provided insights into the microbial communities associated with decomposing swine carcasses in microcosm.

• Journal of Animal Science and Technology
• /
• v.46 no.3
• /
• pp.295-300
• /
• 2004

The identification of the leptin gene in 1994 and it's adipocytes specific protein leptin hal provided the first physiological links to the regulatory system controlling body weight and fat deposits. The meat tastes is mainly determined by quantifY and quality of triglyceride stored in adipose tissue. This study was conducted to analyze genetic cbaracteristics of Hanwoo leptin gene and also to investigate the association of DNA marlcer with some economic meat traits for Hanwoo. The leptin hormone gene polymorphisms were identified by digestion with Kpn2 I and Msp I. Slaughter weight(SWI), slaughter peroentage(SP), longissimus muscle area(LMA), beef marbling score(MS) and back fat thickness(BF) were compared among three genotypes by P(R..RFlJ> and showed significant differences among genotypes. PCR-RFLP(Kpn2 I) were detected significant for SP, MS and BF. The allele was essociated with fatter carcasses and C allele with leaner carcasses.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.9
• /
• pp.1348-1352
• /
• 2005

Most breeds of sheep in Iran are adapted to their agro ecological niches where it is likely that they were also artificially selected by their owners. In general, most of sheep breeds are multipurpose producing lambs, wool and milk. To compare the physical and chemical composition of the carcasses of ten Iranian native fat-tailed sheep breeds, 243 male lambs (6-7 months of age) of ten fattailed, Iranian breeds of sheep, Sanjabi (S), Ghezel (G), Afshari (A), Mehrabani (M), Lori (L), Lori Bakhtiari (LB), Kordi Khorasan (K), Sangesari (Sa), Baluchi (B) and Chal (C) were studied. Lamb breed group had a significant (p<0.05) effect on all the carcass traits measured. The LB and C lambs showed the same live weight which was significantly (p<0.05) higher than the other breeds. Carcass dressing- out percentage in S lambs was lowest (p<0.05), but not different from G lambs. K and Sa breeds showed the highest (p<0.05) carcass dressing-out percentage. The S lambs had the highest (p<0.05) lean meat percent. Lean meat percentage was not significantly (p>0.05) different in the G, A, M and C breeds. The Sa and K breeds showed the lowest lean meat percent. The S lambs showed the lowest (p<0.05) fat percent in their carcass, while K and Sa showed the highest (p<0.05). Subcutaneous fat in K, Sa and B was higher (p<0.05) than the other breeds. Lambs of S, G, A and M breeds had the lowest subcutaneous fat in their carcasses (p>0.05). Intramascular fat was significantly (p<0.05) lower in M, S and C despite the fact that this values were highest in B and K lambs. The K and Sa breeds had highest fat-tail percentage (p<0.05) in their carcass, whereas S and G showed lowest. Lambs of G, S and A breeds had higher bone percent than other breeds (p<0.05). Lowest bone percent (p<0.05) was seen in K and Sa lambs. The carcass moisture percent was not significantly (p>0.05) different in S, G, A, M, L and C breeds. M lambs showed the lowest crude protein percentage and S breed the highest (p<0.05). There were no significant (p>0.05) differences among other lamb breeds for this trait. Chemical fat percentage was the same in S, G, A, C and M breeds, but significantly (p<0.05) lower from LB, K, Sa and B. Ash percent in S, G and A had no significant (p>0.05) difference. According to higher lean meat and lower fat percentages in the carcass, the ranking of breeds would be S, G, A, M and C.

• Food Science of Animal Resources
• /
• v.31 no.2
• /
• pp.280-289
• /
• 2011

Analyses were conducted to estimate the effect of backfat thickness (BFT) on carcass grade factors and carcass price in Hanwoo cows and steers. Data on grade factors and prices were collected from 69,159 Hanwoo carcasses (n = 13,376 cows, n = 55,783 steers) abtained at the Nonghyup Seoul slaughter house in 2009. Carcass BFTs were divided into nine categories from ${\leq}$ 3 mm to ${\qeq}$ 25 mm. The average BFTs were 11.93 mm in cows and 12.57 mm in steers. An increase in the BFT resulted in an increase in carcass weight, loin-eye area, skeletal maturity, fat color, but decreases in the yield index and yield grade (from grade A to C) in cows and steers. Carcass unit price (Won/kg) improved if the carcass was sold with a BFT of 13-15 mm in cows and 10-12 mm in steers. Marbling score and quality grade increased significantly to 21 mm BFT but decreased from a BFT of 22 mm in cows and steers. BFT was significantly correlated with yield index (cow, r = $-0.97^{**}$; steer, r = $-0.96^{**}$), marbling score (cow, r = $0.20^{**}$; steer, r = $0.14^{**}$), and carcass price (cow, r = $0.03^{**}$; steer, r = $-0.11^{**}$). These results could be used as a fundamental dataset for further research to increase the productivity of Hanwoo carcasses.

• BMB Reports
• /
• v.41 no.12
• /
• pp.846-851
• /
• 2008

This study was conducted to identify marbling-related candidate genes in M. longissimus dorsi of high- and low-marbled Hanwoo. The longissimus dorsi muscles were selected for gene expression from eight Hanwoo steer carcasses based on crude fat content. In the analysis of variance, gene expression of five candidate genes, FABP4, SCD, $PPAR\gamma$, Titin and Nebulin was determined to be significantly different between high- and low-marbled Hanwoo steers (P < 0.0001). The Pik-4 and CaMK II genes were also shown to have a significant effect on crude fat content (P < 0.01). In the analysis of the differential expression between high- and low marbled groups, FABP4 gene expression was approximately 2 times higher in the high marbled group relative to the low marbled group. However, the $PPAR\gamma$ and SCD gene were highly expressed in the low marbled group. In addition, Titin and Nebulin were highly expressed in the low marbled group when placed under relatively high shear force. Finally, the Pik-4 and CaM K II gene also displayed a high expression pattern in the low marbled group.