• 한국군사과학기술학회지
• /
• 제12권1호
• /
• pp.24-28
• /
• 2009

In this study, we investigated whether the anhysteretic demagnetization process would be applicable to remove a complicated magnetization of a steel tube as a part of the experimental earlier study for a deperming of naval vessel. The magnetic tube used in this study was a 10cm-long and 1cm-diameter steel tube, and magnetized with a E-shape ferrite core to form a nonuniform magnetization in it. In the anhysteretic demagnetization process, a dc magnetic field applied along the longitudinal direction of the tube decreased from ${\pm}$3kA/m to zero-field with the step of ${\pm}$300A/m. At the same time, an ac bias magnetic field with the frequency of 60Hz and the field intensity of 300A/m was excited along the circumstantial direction of the tube. It was found that the anhysteretic process was useful to demagnetize a small-object like a steel tube from the experimental results showing the residual magnetization reduced over 90%.

• 정보통신설비학회논문지
• /
• 제11권2호
• /
• pp.46-51
• /
• 2012

In this paper deperm performance on deperm protocol cycle has been analyzed. As deperm protocol increases cycle, deperm performance improves and duration time will increase. Thus, it's essential that proper deperm cycle that is fit on vessel should be applied. To compare deperm performance according to cycle changes, small deperm system has been made and small vessel had been made with SM45C materials. As Anhysteretic deperm protocol applied, the result on the increase of deperm performance according to the increase of cycle has been gotten.

• 한국소음진동공학회논문집
• /
• 제19권4호
• /
• pp.418-424
• /
• 2009

This work is the attempt to give qualitative explanations to complex magnetic phenomena which are observed in the previously proposed magnetostrictive sensor capable of ultrasonic waves and rotational speed measurement. The law of approach is adopted as analysis tool in order to account for some extraordinary output patterns and proved to be effective. The distance between the anhysteretic curve current magnetic state and the variation of anhysteretic curve by stress mainly determine the sensor output shapes and their uniqueness. It is also experimentally verified that the precisely determined bias magnetic field strength can not only remove the unusual output parts but also maximize its sensitivity.

• 한국자기학회지
• /
• 제23권2호
• /
• pp.54-61
• /
• 2013

강자성체는 자구들의 상호작용으로 인해 잔류 자화가 남게 되는데, 전자전기 산업 및 국방 피탐지 분야에서는 이러한 잔류 자화량을 정밀하게 0으로 만드는 탈자기법이 요구된다. 하지만 현재 수행되는 탈자기법들은 경험과 실험에 의존한 방법들로, 새로운 재료의 개발에 따른 효율적인 탈자를 위해서는 강자성체의 히스테리시스 곡선을 반영한 탈자기법이 필요하다. 본 논문에서는 자성체의 물성적인 성질을 기반으로 정립된 Preisach 모델링 기법을 이용하여 Anhysteretic Deperm, Deperm-ME, Flash-Deperm에 따른 2차원 유한요소해석을 수행하였다. 탈자 전류에 의한 자기이력궤적의 분석을 통해 강자성체의 히스테리시스 곡선과 탈자 변수의 관계를 고찰하였으며, 이로써 탈자에 효율적인 전류 감소 형태를 제시하였다.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.359-363
• /
• 2011

An orthogonal magnetic field is often used for a military vessel in the deperm process such as Flash D deperm protocol and Anhysteretic deperm protocol. The effect of the orthogonal magnetic field on a deperm performance was investigated for a sample with strain-induced magnetization and field-induced magnetization given to different direction. A 70mm wide, 110mm long and 0.25mm thick rectangular steel plate was bent to have U-shape and to generate a strong strain on the bottom region of U-shaped steel plate. Field-induced magnetization was attached by NdFeB permanent magnet. Demagnetization was performed by applying magnetic field with a step decrement from the first field(the first shot) under the action of DC bias field.

• Journal of Magnetics
• /
• 제19권1호
• /
• pp.43-48
• /
• 2014

Magnetic materials with large coercive force and high squareness ratio are currently developing to meet an industrial demand. Since a ferromagnetic material has hysteresis characteristics, it is hard to demagnetize a ferromagnetic material precisely. In this paper, we describe deperm processes and conduct an analysis of residual magnetization of ferromagnetic material using the Preisach modeling with a two-dimensional finite elements method (FEM). From the results, it was shown that an exponential decrement form of deperm protocol is more efficient than a linear decrement form because of the demagnetizing field in the ferromagnetic material.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.453-456
• /
• 2011

Demagnetization for a tube sample which was made of a galvanized steel sheet was performed by applying a magnetic field with a decrement to remove the remanent magnetization of the material. An orthogonal fluxgate magnetic field sensor was used to measure a magnetic field created from a ferromagnetic material. To evaluate the remanent magnetization, the measured magnetic fields were separated into two magnetic field components by the remnant magnetization and the induced one. The horizontal and the vertical bias fields should be controlled separately during demagnetization to remove the horizontal and the vertical components of the remanent magnetization of the tube sample.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.85-92
• /
• 2017

This research is proposed with the efficient searching method of deperming protocol for magnetic silence. The deperming protocol has been changed depending on the initial magnetic field, the final magnetic field, and the shot number, so deciding parameter is highly important. Therefore, in this paper, the value of the initial magnetic field is supposed to be fixed to that of the saturation field, and excluding the initial magnetic field in the variable, the deperming protocol has been analyzed depending on the final magnetic field and the change of the shot number. In the result of this experiment, the final magnetic field gets high performance to the reverse of the direction of the initial magnetization, and it is resulted that the shot number inverse proportion to the size of the final magnetic field.

• 자원환경지질
• /
• 제46권3호
• /
• pp.207-214
• /
• 2013

2012년 통가해저열수광상 개발 사업의 일환으로 통가아크 해저산 TA25에서 ROV와 GTV를 이용하여 열수황화물광체를 채취하였다. 채취된 광체 중 본 연구에서는 약 $200^{\circ}C$의 열수분출을 보인 고온성 활성침니(ROV01), $80^{\circ}C$의 열수분출을 보인 저온성 활성침니(GTV01), 그리고 비활성침니(ROV02)를 이용하여, 암석자기학적 특성을 규명하고 이를 바탕으로 광체의 진화과정을 알아보고자 하였다. ROV01의 자기적 특성은 주로 자류철석에 의해 나타나며, GTV01의 경우 광체내부는 자류철석이 주로 나타나지만 외곽으로 갈수록 자류철석과 적철석이 혼재하게 된다. 비활성침니인 ROV02는 오랜 산화작용으로 인해 외곽에서 적철석뿐만 아니라 침철석이 자류철석과 함께 나타나고, 최외곽에서는 magnetotactic bacteria의 작용에 의해 자철석이 존재한다. 포화잔류자화(saturation magnetic remanent magnetization, SIRM), 비자기이력잔류자화(anhysteretic remanent magnetization, ARM)/SIRM으로 나타낸 자성광물의 함량과 입자크기 변화는 침니의 특성에 따라 뚜렷한 차이가 난다. 고온의 ROV01에서 가장 적은 함량과 작은 입자크기를 보이며, 저온의 GTV01에서 점차 증가하다가 비활성침니인 ROV02에서 가장 높은 함량과 큰 입자크기를 나타내게 된다. 이러한 결과는 자성광물의 종류, 함량, 입자크기 변화 등의 암석자기학적 특성을 이용하여 기존 광물학적 접근방법으로 추적에 한계가 있었던 열수황화물광체의 진화과정에 대한 정보를 획득할 수 있을 것으로 판단된다.