• The Korean Journal of Rheology
• /
• v.10 no.3
• /
• pp.143-151
• /
• 1998

실리콘 오일에 인산처리 셀룰로오스 분말을 분산시킨 비수계 전기유변성(ER) 유체 의 전기유변 거동을 상온에서 최대 2.5KV/mm의 전기장하에서 실험하였다. 넓은 온도 영역 에서 사용이 가증한 비수계 ER 유체를 개발하기 위해 셀룰로오스의 인산 에스테르 반응이 ER 유체의 전기유변효과에 미치는 영향을 조사하였다. 먼저 여러 가지의 인산처리 농도로 처리된 인산처리 셀룰로오스 미립자를 분산시킨 ER 유체를 제조한 후 ER 유체의 유전상수, 전류밀도 및 전기전도도 등과 같은 전기적 특성을 측정하였으며 ER 유체의 전기유변 특성 또한 측정하였다. 인산처리 셀룰로오스가 분산된 비수계 ER 유체의 전류밀도는 셀룰로오스 의 인산 에스테르 반응에서의 인산처리 농도에 의해 조절할수 있음을 알수있었으며 셀룰로 오스의 인산처리 농도가 2.5 M과 3.0 M 사이일 때 인산처리 셀룰로오스가 첨가된 비수계 ER 유체의 전기유변효과 ($\tau$/$\tau$0)가 가장 높게 측정되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.40-43
• /
• 2008

High temperature polymer electrolyte membranes incorporating ionic liquids (ILs) in different polymers such as commercial fluorinated polymers, sulfonated polymers and recasted nafion have been developed. ILs based on imidazolium cation and different anions possess high ionic conductivity and good thermal stability and have been used in the present study. The membranes containing IL show conductivity ${\sim}10^{-2}S\;cm^{-1}$ above $100^{\circ}C$ under anhydrous conditions and are thermally stable up to $250-300^{\circ}C$. IL acts as a conducting medium in these electrolytes and plays the same role as played by water in fully hydrated nafion membranes. Due to high conductivity and good thermal stability, these membranes are promising materials for PEFCs at higher temperatures under anhydrous conditions.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.313-318
• /
• 2003

Vitamin C's function and mechanism are comparatively well known among the several kinds of vitamins. Inhibition of free radical. promotion of collagen synthesis, restraint of melanin formation and resolution of melanin are its main functions. But Vitamin C is very easy to oxidize by heat, moisture or air so it causes stability problem to make formulation. To solve these problems unique formulating method or derivatives using method could be effective. Object: First, stabilize 10% of Ascorbic acid as polyol/silicone emulsion and try to make polyol/silicone/polyol anhydrous multiple emulsion secondly. And then, encapsulate with porous power to enhance the stability of Ascorbic Acid from formulating method.

• Particle and aerosol research
• /
• v.6 no.1
• /
• pp.37-46
• /
• 2010

Cu nano-colloid was prepared by wire electric explosion process under de-mineralized water and anhydrous ethanol. To control the properties of Cu nano-colloid, experimental conditions such as diameter of Cu wire and applied voltage were changed. The optimal Cu nano-colloid was prepared when the 0.1mm diameter of Cu wire with the applied voltage of 2000 V was used. The shape of Cu particles in colloid was spherical and the XRD result revealed that the phase of Cu particles was cubic phase. About 20nm Cu nanoparticles with high crystallinity were successfully prepared using wire explosion process under anhydrous ethanol and they showed more than 100 hours dispersion stability.

• Journal of the Korean Ceramic Society
• /
• v.45 no.1
• /
• pp.54-59
• /
• 2008

Hydrated sodium silicate with 25 wt% water contents was synthesized by hydrothermal reaction using anhydrous sodium silicate. The hydrated sodium silicate was expanded at $370^{\circ}C$ for 30 min. and then pulverized, classified (- 200 mesh) and press-formed. The samples were heat treated at $400{\sim}900^{\circ}C$ for 30 min. in order to study the expansion characteristics depending on heat treatment temperature. A porous body with closed pore was formed above $600^{\circ}C$. The volume expansion ratio and the pore size were increased and the specific gravity was decreased with increasing heat treatment temperature. However, the volume expansion ratio was decreased and the specific gravity was increased above $850^{\circ}C$ due to the softening of the sodium silicate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.129-132
• /
• 2000

Perdeuterated hexafluoroacetylacetonato -ytterbium [$Yb (HFA -D)$_3$_3$] complexes were synthesized by the koto-enol tautomerism reaction of $Yb(HFA-H)_3$ in methanol-$d_4$, in order to reduce the radiationless transition to the ligands. The luminescence properties of $Yb(HFA-D)_3$ complex were measured in the following anhydrous deuterated organic solvents : Acetone-$d_6$, Methanol-$d_4$, THF-$d_8$, $PO(OC$H_3$)_3$ and DMSO-$d_6$. The intensity, lifetime and quantum efficiency of the luminescence in DMSO-$d_6$ were superior to those in other deuterated solvents. It was suggested that the anhydrous DMSO-d$_{6}$ might be the most appropriate solvent for the liquid laser material of $Yb(HFA-D)_3$ complex.x.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.928-933
• /
• 2001

Perdeuterated hexaflouroacetylacetonato-ytterbium [Yb(SOL-D)$_3$] complexes are synthesized by the keto-enol tautomerism reaction of Yb(SOL-H)$_3$ in methanol-d$_4$ in order to reduce the radiationless transition to the ligands for the high power solid state laser material. The luminescence properties of Yb(SOL-D)$_3$ complex are measured in the following anhydrous deuterated organic solvents ; Methanol-d$_4$, THF-d$_{8}$, PO(O$CH_3$)$_3$ and DMSO-d$_{6}$. The Luminescence intensity, lifetime and quantum efficiency in DMSO-d$_{6}$ are superior to those in other deuterated solvents. It is suggested that the anhydrous DMSO-d$_{6}$ might be the most appropriate solvent for the laser material of Yb(SOL-D)$_3$ complex.complex.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.11
• /
• pp.1023-1031
• /
• 1996

A new synthetic route for the lanthanum β-diketonate compounds via in-situ formed lanthanum alkyl complexes was developed in the process for the development of suitable MOCVD (metal-organic chemical vapor deposition) precursors of PLT, one of the promising material for the ferroelectric film. A series of lanthanum β-diketonate compounds were successfully synthesized by this method. This new method is found to have some merits; versatile method for almost every β-diketone, β-hydroxyketone, and β-hydroxyaldehyde, short reaction time, easy purification for high purity, moderate to high yield, and easy access to anhydrous compounds. In some cases, anhydrous oligomeric products fail to show the higher volatility. On the other hand, some lanthanum β-diketonates with aromatic groups such as La(1,3-biphenyl-l,3-propandione)3 are found to have favorable properties for a precursor of lanthanum oxide, one of major components of PLT, such as low melting point, and much higher decomposition temperature. A plausible pyrolysis mechanism is proposed by the TGA, where consecutive dissociation of R, CO, CH, C, and O fragments occurs.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.8
• /
• pp.925-928
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• v.22 no.10
• /
• pp.1081-1088
• /
• 2001