• Cement Symposium
• /
• no.24
• /
• pp.67-74
• /
• 1996

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.727-730
• /
• 2005

The purpose of this study evaluates possibilities of waste phosphogypsum into concerts by steam curing admixture. The waste phosphogypsum is made use of 4 forms(Dehydrate, $\beta$-Hemihydrate, III-Anhydrite and II-Anhydrite) which were changed to in low temperature of calcination. The penetration depth and compressive strength of cement mortar are investigated to evaluate the chloride ion and carbonation resistance. As a result, chloride ion and carbonation resistance of cement mortar admixed with waste phosphogypsum are more excellent than cement mortar contained OPC alone. The internal pores of cement mortar are decreased by using waste phosphogypsum, because the hydrates of ettringite which is denesified in structure is much formed in early ages at steam curing. These densified effect is concluded with improving the resistance to attack of cement mortar including waste phospogypsum.

• Resources Recycling
• /
• v.24 no.1
• /
• pp.12-20
• /
• 2015

In this study, change of hydration property with contents and type of gypsum in ternary natural hydraulic lime containing blast furnace slag and gypsum was investigated. Anhydrite, hemihydrate and dihydrate were added 3 % and 10 %, respectively in natural hydraulic lime adding blast furnace slag 20 %. Hydration and physical behavior due to solubility and reactivity of different types of gypsum were analyzed in early hydration. As a result of analysis of hydration properties, in all samples, hydrates such as ettringite and C-S-H were produced in early hydration, and amount of hydrates with increase of hydration time was increased. In the case of compressive strength, when contents of gypsum are 3 %, it was higher compressive strength than other specimens. At hydration 28 days, for addition of anhydrite and hemihydrate, compressive strength was more than adding dihydrate.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.3
• /
• pp.149-156
• /
• 1997

In order to improve compressive strength of cement mortar, powder admixture(FAS) was mmufactured by mixing fly ash. Il-anhydite and silica hume, and superplasticizer was used for the control of fluidity reduction with the use of this admixture. Cement was substituted by 10, 20wt% of FAS respectively. At W/S = 0.40, the fluidity of' cement paste substituted by PAS was decreased. NSF and NT-2 were very effective fbr the control of fluidity reduction. As the particle size of U -anhydrite was fine, the fluidity of cement mortar was increased. The fluidity reduction of cement mortar substituted by 10wt% of FAS was controlled. The compressive strength of cement mortar substituted by 10wt% of FAS showed higher. value than that of 20wt%, expecially specimen(C1) substituted by 10wt% of $\gamma$ had the highest compressive strength value.

• Composites Research
• /
• v.25 no.4
• /
• pp.110-116
• /
• 2012

Recently, the development and field applications of Ternary Blended Cement(TBC), where blast furnace slag and fly ash are recycled in Ordinary Portland Cement(OPC) in order to obtain improvements in the durability and heat of hydration reduction performance in large scale civil structures, have been increasing. Also, there are continuing efforts by construction companies to reduce the construction time with the aim of reducing construction costs. Therefore, there is a need to improve the performance of TBC, which has a relatively slow early strength development. In order to improve the early strength of TBC mortar, the compressive strength, SO3 content, and SEM analysis was determined in this study on mortar with the fineness and content of blast furnace slag and anhydrite regulated. As a result, to secure the early strength of TBC mortar, using blast furnace slag with a fineness of approximately $4,200cm^2/g$, adding 3.5% anhydrite with a fineness of approximately $10,000cm^2/g$, and managing the $SO_3$ content to roughly 3.72% was found to provide the most outstanding early strength properties.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.177-184
• /
• 2015

In order to use the high-volume slag cement as a construction materials, a proper activator which can improve the latent hydraulic reactivity is required. The dissolved aluminum silicon ions from ground granulated blast furnace slag (GGBFS) react with sulfate ions to form ettringite. The proper formation of ettringite can increase the early-age strength of high-volume GGBFS (80%) cement. The aim of this study is to investigate the hydration properties with sulfate activators (sodium sulfate, anhydrite). In this paper, the effects of $Na_2SO_4$ and $CaSO_4$ on setting, compressive strength, hydration, micro-structure were investigated in high-volume GGBFS cement and compared with those of without activator. Test results indicate that equivalent $SO_3$ content of 3~5% improve the early-age hydration properties such as compressive strength, heat evolution rate, micro-pore structure in high-volume GGBFS cement.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.190-196
• /
• 2001

Alunite was dehydrated at 500~$580^{\circ}C$ and desulfurued at 580~$780^{\circ}C$ in air atmosphere. Therefore, this study was carried out to investigate the formation conditions of anhydrite ($CaCO_4$) when the mixtures of alunite TEX>$[K_2SO_4$.$Al_2(SO_4)_3$.$4Al(OH)_3$] and limestone ($CaCO_3$)were roasted. Alunite scarcely dected the partial pressures of $CO_2$(g), but limestone was bansformed into CaO at $650^{\circ}C$ in air and $900^{\circ}C$ in saturated $CO_2$(g), atmosphere, respectively. When the the mixtures of 1 mol of alunite and 6 rnol of limestone were roasted for 2 hours at lO00C in air and saturated $CO_2$(g), anhydrite was formed at $550^{\circ}C$ calciumlangbeinite, at $700^{\circ}C$and haiiyne, at 800~$950^{\circ}C$. The formation rate of anhydrite in air and saturated $CO_2$(g), was 99.0 % and 95.0 %, respectively. then the formation rate of anhydrite was not changed in air atmosphere but increased according to the decreasing of the particle size of limestone in saturated $CO_2$(g). Therefore, when the mixture of 1 mol of alunite and 6 rnol of limestone were roasted, the clinker composed of lmol of haiiync and 1 mol of calciumlangbeiilte can be manufactured

• Journal of the Korean Ceramic Society
• /
• v.35 no.5
• /
• pp.479-485
• /
• 1998

Raw mateials such as limestone quartzite bauxite and anhydrite were used in the production of mod-ified beloite cement. Two kinds of clinker were synthesized with relatively higher content of $C_2S$ than that of $C_4A_3{\={S}}$ Concerning $C_2S$ the main mineral component borax ($Na_2O\;2B_2O_3\;10H_2O$) was added to stimu-late hydraulic reactivity and this would be possible by stabilizing ${\alpha}'-C_2S$ at room temperature. We had in-tended to compare burning and hydraulic characteristics of clinkers with one another by varying the amount of borax addition and to study the appropriate amount of anhydrite addition needed in the strengthening of cement during hydration. It was concluded that the effective amount of borax addition ne-eded for stabilization of ${\alpha}'-C_2S$ was 5 wt% in 60wt% $C_2S$ inclusive clinker and adding anhydrite in the ra-tio of 1.3 of $SO_3/Al_3O_3$ was appropriate in the production of cement by this clinker. Only ettringite was seen to contribute to the strength without additives but C-S-H was found to form along with ettringite with the addition of borax in the initial stage of hydration.

• Geomechanics and Engineering
• /
• v.29 no.1
• /
• pp.65-77
• /
• 2022

Determination of strength properties of intact rock using artificial cores has been considered in recent years. In this study, some relationships for estimating the static properties of dolomudstone cores of the Asmari reservoir were presented using artificial cores prepared from cuttings of two wells, southwest of Iran. For this purpose, first natural cuttings (NC) and 33 cores including dolomite limestone (dolomudstone), anhydrite and anhydrite dolomite were prepared between depths of 1714 and 2208 meters. Petrographic, physical, mechanical and dynamic tests were performed on cores, NC and artificial cuttings (AC) which was prepared from the residuals of dolomudstone cores. For preparing the artificial cores, the average porosity of the dolomudstone cores was considered and determined using four methods. Artificial and natural cuttings were classified as dolomite limestone and dolomite limestone to calcareous dolomite, respectively. Using ordinary Portland cement (OPC), water, AC and NC artificial cores were prepared. Results of evaluating the proposed relationships using statistical criteria showed that the static properties of the artificial cores can be used to predict the static properties of the dolomudstone cores.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.2
• /
• pp.101-106
• /
• 2013

In this study, shrinkage reducing agent was fabricated with $12CaO{\cdot}7Al_2O_3(C_{12}A_7)$ of CA-based slag and anhydrite. Mortars added shrinkage reducing agent were experimented for enhancement of shrinkage reduction and compressive strength. The properties of setting time, length change and compressive strength of mortar changed with mixing ratios. From 0% to 6% $C_{12}A_7$-based slag, setting times got shorter and length changes of mortars were similar to 7days. From 1day to 7days, the more mortar had $C_{12}A_7$-based slag, the higher compressive strength. At 28days, compressive strength of mortars with 6% $C_{12}A_7$-based slag was about 36MPa. After 35days, mortar with 6% $C_{12}A_7$-based slag had the lowest ratio of shrinkage reduction. So mortar with 6% $C_{12}A_7$-based slag had the excellent characteristics such as compressive strength and shrinkage reduction ratio.