• 한국음향학회지
• /
• 제26권4호
• /
• pp.166-172
• /
• 2007

본 논문에서는 표적 위치추정기법 및 관측잡음에 따른 다중상태 소나의 표적위치 추정성능에 대하여 논한다. 다중상태 소나망에 대한 기존 정보융합방법인 거리정보만을 이용하는 Maximum Likelihood (ML)와 거리정보와 방위정보를 함께 이용하는 Least Square (LS)에 대한 분석을 기반으로 거리정보와 방위정보를 함께 이용하는 ML을 제안한다. 각 센서가 거리정보와 방위정보를 이용한다고 가정할 때 다양한 잡음 환경하에 기존 방법과 제안된 방법에 대한 비교 실험을 수행했다. 또한 센서 수와 송신기, 수신기간 거리에 따른 표적위치 추정성능에 대한 연구를 수행했다. 실험결과에 의하여 제안된 거리정보와 방위정보를 함께 이용하는 ML의 제곱근 오차 성능이 송수신기간 거리가 길수록, 수신기 수가 적을수록 기존의 거리정보만 이용하는 ML, LS보다 더 우수한 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.329-329
• /
• 2011

We measured thin films thickness sputtered from Cu target in the magnetron sputter system. Thin films thickness is thin as integration power in target is large. Cu thin films thickness in 100 kWh integration watt was decreased by 20% when that of beginning was compared. But the shape of thin films thickness distribution was same. For the calculation of thin films thickness distribution in the 100 kWh, the angular distribution data sputtered of Cu particles is necessary when Ar ions enter to inclined erosion surface of Cu target. We used the relation results of sputter yield and main angular distribution of sputtering particles emitted from Cu target published by G. Betz.

• 한국자기학회지
• /
• 제7권4호
• /
• pp.186-190
• /
• 1997

2축 Helmholtz 코일을 이용해서 연자성박막의 이방성 분산을 측정할 수 있는 장치를 제작하여 TBP(Transverse Biased Permeability) 측정 방법으로 rf 스파터방법으로 제작한 퍼말로이박막의 이방성 불균일성을 측정하였다. 각도불균일분포함수의 경우 Lorentz 함수형태를 띄며, 크기불균일 분포함수의 경우 자장이 큰 영역에서의 분산 값이 커져 대칭분포에서 벗어난다. 퍼말로이 박막의 두께가 증가할수록 이방성의 각도 및 크기분산이 커지고 각도 분산의 경우 이것은 두께 증가에 따른 결정립 크기의 증대와 국소이방성의 증가로 설명할 수 있었다.

• 천문학회보
• /
• 제44권1호
• /
• pp.58.3-58.3
• /
• 2019

Optical intensity interferometry, developed in the 1950s, is a simple and inexpensive method for achieving angular resolutions on microarcsecond scales. Its low sensitivity has limited intensity interferometric observations to bright stars so far. Substantial improvements are possible by using avalanche photodiodes (APDs) as light detectors. We present here the results of laboratory measurements with a prototype astronomical intensity interferometer using APDs in continuous ("linear") detection mode - arguably, the first of its kind. We used two interferometer configurations, one with zero baseline and one with variable baseline. Using a superluminous diode as light source, we unambiguously detected Hanbury Brown-Twiss photon-photon correlations at very high significance. From measuring the correlation as function of baseline, we measured the angular diameter of the light source, in analogy to the measurement of the angular diameter of a star. Our results demonstrate the possibility to construct large astronomical intensity interferometers that can address a multitude of astrophysical science cases.

• 디지털콘텐츠학회 논문지
• /
• 제16권3호
• /
• pp.463-470
• /
• 2015

최근 개인선량계로 사용이 증가하고 있는 수동형 선량계인 OSLD와 능동형 선량계인 EPD의 상대 반응도(relative response), 측정 불확도(uncertainty of measurement)를 계산하여 방향의존성(angular dependence)을 비교, 분석하였다. OSLD는 수평, 수직방향의 $0^{\circ}{\sim}{\pm}90^{\circ}$ 범위에서 평균 상대 반응도는 0.97, 0.95의 작은 변화를 보였고 방향의존성에 대한 불확도는 0.65, 0.62로 전체 불확도에 미치는 영향은 미미한 것으로 판단되었다. EPD는 $0^{\circ}{\sim}{\pm}60^{\circ}$ 범위에서 수평, 수직방향 평균 상대 반응도는 0.94, 0.97로 확인되어 IEC 61526 규정을 만족하였다. 방향의존성에 대한 불확도는 수평, 수직방향에서 0.44, 0.40로 전체 불확도에 미치는 영향은 미미하였다. 그러나 수평방향에서 $+90^{\circ}$, $-90^{\circ}$ 방향의 상대 반응도는 0.60, 0.37이고 수직방향에서 $+90^{\circ}$ 방향의 반응도는 0.06으로 반응도의 큰 변화를 관찰할 수 있었다. OSLD의 방향 의존성은 $0^{\circ}{\sim}{\pm}90^{\circ}$ 범위까지 EPD에 비해 우수하였으며 EPD의 경우 구조적 특징으로 반응도가 급변하는 특정방향이 존재하였다. 따라서 수동형선량계와 보조선량계의 병행사용이 개인피폭선량측정의 정확도를 기할 수 있을 것으로 판단된다.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.605-611
• /
• 2015

The measurement and analysis of angular change have been studied in many fields. This study developed an angle measurement technique with optical fiber and photodiode. The position and attached angle of photodiode were investigated to find the proper combination of parameter. The results showed that the increased measuring range was achieved when the position of detector was away from the center of rotation. Inverse mathematical model was used to obtain angular changes with an optical fiber. The applications of this study include in optical sensor, joint angle measurement, and sport science.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권11호
• /
• pp.748-754
• /
• 1999

Micromirrors supported by S-shape girders were fabricated and their angular deflections were measured using a laser-based system. A micromirror consists of a $50\mum\times50\mum$ aluminum plate, posts and an S-shape girder. Two electrodes were deposited on two corners of the substrate beneath the mirror plate. $50\times50$micromirror array were fabricated using the Al-MEMS process. The electrostatic force caused by the voltage difference between the mirror plate and one of the electrodes causes the mirror plate to tilt until the girder touches the substrate. Bial voltage of the mirror plate is between 25~35V and signal pulse voltage on both electrodes is $\pm5V$. A laser-based system capable of real-time two-dimensional angular deflection measurement of the micromirror was developed. The operation of the system is based on measuring the displacement of a HeNe laser beam reflecting off the micromirror. The resonant frequency of the micromirror is 50kHz when the girder touches the substrate and it is 25 when the micromirror goes back to flat position, since the moving mass is about twice of the former case. The measurement results also revealed that the micromirror slants to the other direction even after the girder touches the substrate.

• 한국전문물리치료학회지
• /
• 제30권3호
• /
• pp.174-183
• /
• 2023

Background: Office workers experience neck or back pain due to poor posture, such as flexed head and forward head posture, during long-term sedentary work. Posture correction is used to reduce pain caused by poor posture and ensures proper alignment of the body. Several assistive devices have been developed to assist in maintaining an ideal posture; however, there are limitations in practical use due to vast size, unproven long-term effects or inconsistency of maintaining posture alignment. We developed a headphone and necklace posture correction system (HANPCS) for posture correction using an inertial measurement unit (IMU) sensor that provides visual or auditory feedback. Objects: To demonstrate the test-retest reliability and concurrent validity of neck and upper trunk flexion measurements using a HANPCS, compared with a three-dimensional motion analysis system (3DMAS). Methods: Twenty-nine participants were included in this study. The HANPCS was applied to each participant. The angle for each action was measured simultaneously using the HANPCS and 3DMAS. The data were analyzed using the intraclass correlation coefficient (ICC) = [3,3] with 95% confidence intervals (CIs). Results: The angular measurements of the HANPCS for neck and upper trunk flexions showed high intra- (ICC = 0.954-0.971) and inter-day (ICC = 0.865-0.937) values, standard error of measurement (SEM) values (1.05°-2.04°), and minimal detectable change (MDC) values (2.92°-5.65°). Also, the angular measurements between the HANPCS and 3DMAS had excellent ICC values (> 0.90) for all sessions, which indicates high concurrent validity. Conclusion: Our study demonstrates that the HANPCS is as accurate in measuring angle as the gold standard, 3DMAS. Therefore, the HANPCS is reliable and valid because of its angular measurement reliability and validity.

• 대한족부족관절학회지
• /
• 제13권1호
• /
• pp.1-6
• /
• 2009

Purpose: To study the reliability of intra- and interobserver reliability in angular measurement of hallux valgus deformity by assessing hallux valgus angle (HVA) and the 1st to 2nd intermetatarsal angle (1-2 IMA) through using computerized system. Materials and Methods: 20 cases of moderate to severe hallux valgus patients were included in this study. With the standing anteroposterior view of foot, the HVA and 1-2 IMA were calculated by computerized measurement system of Infinity cooperation, called ${\pi}$-view, with its software tools. Using the statistical software program, SPSS (version 12th), we interpreted the results which were measured by two independent observers. Results: In the intraobserver measurement, the HVA of observer A showed reliability ($32.5^{\circ}{\pm}6.9$ and $33.1^{\circ}{\pm}6.8$)(p<0.05). 1-2 IMA in observer A was not regarded as reliable ($16.9^{\circ}{\pm}2.8$ and $17.1^{\circ}{\pm}2.8$)(p>0.05). In the results of observer B, HVAs were measured as $35.7^{\circ}{\pm}7.6$ and $36.2^{\circ}{\pm}7.7$, and were not reliable (p>0.05). 1-2 IMA in observer B was not reliable as well ($17.0^{\circ}{\pm}0.8$ and $20.8^{\circ}{\pm}1.5$)(p>0.05). In the interobservers' measurements, the first and the second results of HVA were $3.2^{\circ}{\pm}3.6$ and $3.1^{\circ}{\pm}3.1$, reliable within the 95% confidence interval (p<0.05). 1-2 IMAs were $0.1^{\circ}{\pm}1.9$ and $3.73^{\circ}{\pm}1.3$, which were not reliable (p>0.05). Conclusion: In the angular measurement of the hallux valgus by computerized system, the HVA and 1-2 IMA showed less error range in the interobserver's results, compared with the previous studies about the manual measurement. However, our results failed to show the statistical reliability of intra- and interobserver's measuring. Therefore, even the computerized angular measurements in the severity of hallux valgus require development of the measuring methods and software tools.

• 한국컴퓨터정보학회논문지
• /
• 제11권3호
• /
• pp.167-172
• /
• 2006

영상 검색 시스템이란 영상이 갖는 다양한 특징을 바탕으로 똑같거나 유사한 영상을 검색하여 제공하는 시스템이다. 본 논문에서는 영상의 컬러와 형태를 기반으로 한 상표 영상 검색 시스템을 제시한다. 영상을 영역별로 분할하고 영역별 컬러 분포 히스토그램을 추출하여 컬러 정보로 이용한다. 경계면 추출, 무게 중심 추출, angular 샘플링 등의 전처리 과정과 무게 중심으로부터 경계면 까지 거리의 합, 표준 편차, 장/단축 비율을 계산하여 형태정보로 이용한다. 이렇게 추출된 컬러와 형태 정보를 이용하여 유사성 측정을 통한 검색을 수행한다.