• 대한기계학회논문집A
• /
• 제40권3호
• /
• pp.297-304
• /
• 2016

세라믹(AD-90 alumina, $B_4C$) 타일이 삽입된 금속 블록(4340-steel)에 텅스텐 합금(tungsten alloy)의 긴 운동에너지탄을 수직 고속 충돌시키는 수치해석을 수행하였다. 본 연구를 수행하기에 앞서 두 가지의 반무한판 충돌 모델의 침투 깊이에 대해서 검증을 하였다. 세라믹 재료는 JH-2 (Johnson-Holmquist) 모델을 적용하였고 계산된 침투 깊이를 실험값과 비교하여 만족할만한 결과를 얻었다. 앞서 언급한 판에 대해서 세라믹 타일의 세 가지 두께별로 금속판에 삽입된 위치를 다르게 하여 충돌 시뮬레이션을 수행하였다. 긴 관통자의 잔류속도, 잔류질량 그리고 잔류운동에너지를 얻어 세라믹 타일의 위치가 구조물의 방호 성능에 어떠한 영향을 미치는지 알아보았다. 그리고 단순 금속 블록 대비 세라믹 타일을 사용하는 경우의 질량 효율이 어떻게 되는지 확인해보았다. 마지막으로 이들을 토대로 질량효율 관점에서 최적 방호구조에 대한 평가를 수행하였다.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.171-176
• /
• 2001

Plasma Display Panel(PDP) is a type of flat panel display utilizing the light emission produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalks from adjacent sub-pixels. Mold for forming barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing process such as screen printing, sand-blasting and photosensitive glass methods. Mold for PDP barrier ribs have stripes of micro grooves transferring glass-material wall. In this paper, Stripes of grooves of which width 48${\mu}{\textrm}{m}$ and 270${\mu}{\textrm}{m}$, depth 124${\mu}{\textrm}{m}$, pitch 274${\mu}{\textrm}{m}$ was acquired by machining hard and brittle materials of WC, Silicon, Alumina with dicing saw blade. Maximum roughness of the bottom and sidewall of the grooves was respectively 120nm, 287nm in grooving WC. Maximum tilt angle caused by difference between upper-most width and lower-most width was 2$^{\circ}$. Maximum Radius of bottom curvatures was 7.75${\mu}{\textrm}{m}$. This results satisfies the specification for barrier ribs of 50 inch XGA PDP if the groove form of mold was fully transferred to the barrier ribs. Barrier ribs were formed with Silicone rubber mold, which is transferred from grooved hard materials. Silicone rubber mold has elasticity accommodating the waveness of lower glass plate of PDP.

• 한국산림과학회지
• /
• 제76권4호
• /
• pp.317-329
• /
• 1987

본(本) 연구(硏究)에서 한국산(韓國産) 녹나무과(科) 식물(植物) 6속(屬) 7종(種)의 뿌리와 줄기의 이기목부(二期木部)를 비교해부학적(比較解剖學的)으로 연구(硏究)하였다. 도관요소(導管要素) 및 목섬유(木纖維)의 직경(直徑)과 길이는 뿌리가 줄기보다 더 넓고, 더 길었다. 계단상(階段狀) 천공판(穿孔板)을 갖는 도과요소(導管要素)의 말단벽(末端壁) 각도(角度)나 횡대수(橫帶數)는 줄기에 비해 뿌리가 더 사각(斜角)이고 다수(多數)였다. 방사조직(放射組織)의 폭(幅)과 높이는 뿌리에서 줄기보다 넓고 높았다. 이런 특징(特徵)들은 계통발생적(系統發生的)인 면(面)에서 볼 때, 도관요소(導管要素)의 직경(直徑)을 제외(除外)한 대부분의 형질(形質)들은 뿌리가 줄기보다 더 원시적(原始的)인 경향(傾向)을 보인다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제14권4호
• /
• pp.275-282
• /
• 1992

Maxillofacial war injures is specific representative of severe hard and soft tissue defect. This type of injuries were different from the trauma because it may be fatal. The purpose of this study was to evaluate the injury type base on the retrograde medical record in the 104 patients from Feb. 1991 to Aug. 1992 in Korea Veterans Hospital. The obtained results were as follows. 1. Among 104 cases, 51 cases(49.0%) were classified as mandibular defects only, and 53 cases (51.0%) were classified as maxillary with mandibular defect (combined). 2. The etiologic factors of injury were gunshot, artillery and grenade or shell: 33 cases, 14cases, and 10 cases respectively in Korea War, 19 cases, 5 cases, and 8 cases respectively in Vietnam War. 3. In 57 cases of mandibular partial defect, the angle area showed the highest frequencies, 18 cases(31.6%). 4. In 42 cases of mandibular segmental defect, the area between the 1st molar and the ascending ramus showed the highest frequencies. 17 cases(40.4%), and almost all cases were unilateral defect (40 cases, 95.0%) 5. Reconstruction method performed for segmental mandibular defect were wire or plate(15 cases, 35.7%) and soft tissue closure only(12 cases, 28.7%), respectively.

• 한국운동역학회지
• /
• 제26권3호
• /
• pp.249-255
• /
• 2016

Objective: This purpose of this study was to analyze the relationship between dimensionless leg stiffness and kinetic variables during gait performance, and its modulation with body weight. Method: The study sample consisted of 10 young women divided into 2 groups (Control, n=5 and Obese, n=5). Four camcorders (HDR-HC7/HDV 1080i, Sony Corp, Japan) and one force plate (AMTI., USA) were used to analyze the vertical ground reaction force (GRF) variables, center of pressure (COP), low limb joint angle, position of pelvis center and leg lengths during the stance phase of the gait cycle. Results: Our results revealed that the center of mass (COM) displacement velocity along the y-axis was significantly higher in the obese group than that in control subjects. Displacement in the position of the center of the pelvis center (Z-axis) was also significantly higher in the obese group than that in control subjects. In addition, the peak vertical force (PVF) and dimensionless leg stiffness were also significantly higher in the obese group. However, when normalized to the body weight, the PVF did not show a significant between-group difference. When normalized to the leg length, the PVF and stiffness were both lower in the obese group than in control subjects. Conclusion: In the context of performance, we concluded that increased dimensionless leg stiffness during the gait cycle is associated with increased velocity of COM, PVF, and the change in leg lengths (%).

• 한국전산구조공학회논문집
• /
• 제31권5호
• /
• pp.243-250
• /
• 2018

본 논문에서는 복합재 판 스프링의 설계 최적화를 위해 유전자 알고리즘을 사용한 적층 최적화 과정을 제시하였다. 다목적 소형 승합 자동차 판 스프링을 유한요소모델로 구성하여 초기 설계를 검증한 이후, 유전자 알고리즘을 통해 복합재료의 적층수와 적층각도를 최적화하는 과정을 기술하였다. 최적화 과정을 통해 판 스프링의 하중 감소과정, 반복수에 따라 강 구조의 해석 결과와 비교하였다. 더불어 유전자 알고리즘을 통해 최적화된 적층 시퀀스를 구조에 적용하여 구조의 건전성을 검증하기 위해 유한요소 모델로 구성하여 안전여유를 계산하였다. GA를 적용할 때, 복합재료 판 스프링의 적층 두께와 적층 각을 획득하였으며, 이는 적절한 강도와 강성으로 최소 무게를 달성하는데 기여한다. 동일한 설계 매개 변수 및 최적화 조건에서 강철된 판 스프링을 복합재 판 스프링으로 교체하면 65.6%의 중량이 감소한다.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.352-359
• /
• 2017

The growth of nanocrystalline diamond films on a p-type poly silicon substrate was studied using microwave plasma chemical vapor deposition method. A 6 mm thick poly silicon plate was mirror polished and scratched in an ultrasonic bath containing slurries made of 30 cc ethanol and 1 gram of diamond powders having different sizes between 5 and 200 nm. Upon diamond deposition, the specimen scratched in a slurry with the smallest size of diamond powder exhibited the highest diamond particle density and, in turn, fastest diamond film growth rate. Diamond deposition was carried out applying different DC bias voltages (0, -50, -100, -150, -200 V) to the substrate. In the early stage of diamond deposition up to 2 h, the effect of voltage bias was not prominent probably because the diamond nucleation was retarded by ion bombardment onto the substrate. After 4 h of deposition, the film growth rate increased with the modest bias of -100 V and -150 V. With a bigger bias condition(-200 V), the growth rate decreased possibly due to the excessive ion bombardment on the substrate. The film grown under -150V bias exhibited the lowest contact angle and the highest surface roughness, which implied the most hydrophilic surface among the prepared samples. The film growth rate increased with the apparent activation energy of 21.04 kJ/mol as the deposition temperature increased in the range of $300{\sim}600^{\circ}C$.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.177-185
• /
• 2018

There is a need to study dust separator screens with good drainage efficiency while effectively filtering suspended solids and other contaminants entering the intake pumping station, the drainage pumping station and the mediation pumping station, the cooling water inlet of the power plant, and the like. In this paper, Numerical studies were conducted for the optimal design of the dust separator screen using the Coanda effect. The shape of the dust separator screen is important, such as the right curvature radius $R_1$ at the top of the dust separator screen and the left curvature radius $R_2$ at the top, h is the height difference and shape between the screen and the accelerating plate, and ${\theta}$ is the inclination angle of the screen. A total of 4 shape factors were set and the effects of Coanda and drainage performance of each element were compared and analyzed, the optimum length and size of each shape element were derived by classifying the shape elements into direct and indirect influences. Finally, it was possible to effectively filter foreign matter by narrowing the screen spacing, and the drainage performance was analyzed and optimized through numerical studies of dust separator screen.

• 대한조선학회논문집
• /
• 제56권4호
• /
• pp.361-372
• /
• 2019

The flow pattern of air layers and skin-friction drag reduction by air injection are investigated to find the suitable multiphase flow model using unstructured finite-volume CFD solver for the Reynolds-averaged Navier-Stokes equations. In the present computations, two different multiphase flow modeling approaches, such as the Volume of Fluid (VOF) and the Eulerian Multi-Phase (EMP), are adopted to investigate their performances in resolving the two-phase flow pattern and in estimating the frictional drag reduction. First of all, the formation pattern of air layers generated by air injection through a circular opening on the bottom of a flat plate are investigated. These results are then compared with those of MMkiharju's experimental results. Subsequently, the quantitative ratios of skin-friction drag reduction including the behavior of air layers, within turbulent boundary layers in large scale and at high Reynolds number conditions, are investigated under the same conditions as the model test that has been conducted in the US Navy's William B. Morgan Large Cavitation Channel (LCC). From these results, it is found that both VOF and EMP models have similar capability and accuracy in capturing the topology of ventilated air cavities so called'air pockets and branches'. However, EMP model is more favorable in predicting quantitatively the percentage of frictional drag reduction by air injection.

• Corrosion Science and Technology
• /
• 제19권1호
• /
• pp.16-22
• /
• 2020

It is important to realize that benzoate was intercalated into hydrotalcite (HTC-Bz) by the co-precipitation method. In this case, acrylic coating with 0.5 wt% HTC-Bz was deposited on carbon steel using the spin coating method. Next, the HTC-Bz structure was characterized by Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). In fact, an ultraviolet vision spectroscopy (UV-Vis) was used to determine the benzoate content in HTC-Bz, and the UV absorption ability of HTC-Bz. Using electrochemical techniques, water contact angle measurement, and thermal-gravimetric analysis, we compared the protective properties before and after QUV test, hydrophobicity and the thermal stability of acrylic coating containing HTC-Bz. The obtained results showed that HTC-Bz with a plate-like structure was successfully synthesized; benzoate was intercalated into the interlayer of hydrotalcite with a concentration of 28 wt%. Additionally, it was noted that HTC-Bz has an UV absorption peak at 225 nm. In conclusion, the addition of HTC-Bz enhanced the UV stability, hydrophobicity and the thermal stability of acrylic coating.