• 제목/요약/키워드: Angle of plate

검색결과 1,134건 처리시간 0.023초

${\pi}$형 거더를 가진 4경간 사장교의 동적거동에 관한 실험적 연구 (An Experimental Study on the dynamic behavior of 4-Span Cable-Stayed Bridge with ${\pi}$-Type Girder)

  • 조재영;김영민;이학은;윤기용
    • 한국방재학회 논문집
    • /
    • 제4권1호
    • /
    • pp.15-24
    • /
    • 2004
  • 일반적으로, 2개의 I형 거더로 이루어진 ${\pi}$형거더는 공기역학적으로 불안하여 내풍설계에 있어 매우 불리 한 것으로 알려져 있다. 공기역학적 진동은 구조물의 강성이나 감쇠의 향상, 단면 형상의 연구 등에 의해 억제될 수 있으므로 본 연구에서는 ${\pi}$ 형단면을 가진 4경간 사장교에 대해 영각과 공기역학적 제진장치의 추가로 인한 단면의 변화에 따른 2차원 진동실험을 통하여 공기역학적 특성을 파악하도록 하였다. 등류와 난류에서의 실험결과 본 교량단면은 기본단면만으로도 내풍안정성을 충분히 갖추고 있기 때문에 페어링(Fairing) 및 베플(Baffle Plate) 등의 추가적인 공기역학적 제진장치가 필요하지 않을 것으로 판단된다. 이는 본 교량의 경우 주경간이 230m인 4경간으로 이루어져 있어 비슷한 단면을 가진 교량에 비하여 수직 및 비틀림 진동수가 크고 강성이 크기 때문에 설계풍속 내에서 공기역학적으로 안정한 것으로 보여진다.

PHOTOCATALYTIC ANTIEUNGAL ACTIVITY AGAINST CANDIDA ALBICANS BY $TiO_2$ COATED ACRYLIC RESIN DENTURE BASE

  • Yang Ji-Yeon;Kim Hee-Jung;Chung Chae-Heon
    • 대한치과보철학회지
    • /
    • 제44권3호
    • /
    • pp.284-294
    • /
    • 2006
  • Statement of problem. Proliferation of Candida albicans is primarily within the plaque on the fitting surface of the denture rather than on the inflamed mucosa. Consequently, the treatment of the denture is equally important as treatment of the tissue. Cleansing and disinfection should be efficiently carried-out as the organisms can penetrate into the voids of the acrylic resin and grow in them, from which they can continue to infect and reinfect bearing tissues. Purpose. The purpose of this study was to evaluate the applicability of photocatalytic reaction to eliminate Candida albicans from acrylic resin denture base, and to investigate the anti-fungal effect with various UVA illumination time. Materials and Methods. The specimens were cured by the conventional method following the manufacturer's instruction using thermal polymerized denture base resin (Vertex RS: Dentimex, Netherlands). $TiO_2$ photocatalyst sol(LT), which is able to be coated at normal temperature, was made from the Ti-alkoxide progenitor. The XRD patterns, TEM images and nitrogen absorption ability of the $TiO_2$ photocatalyst sol(LT) were compared with the commercial $TiO_2$ photocatalyst P-25. The experimental specimens were coated with the mixture of the $TiO_2$ photocatalyst sol(LT) and binder material (silane) using dip-coater, and uncoated resin plates were used as the control group. Crystallinity of $TiO_2$ of the specimen was tested by the XRD. Size, shape and chemical compositions were also analyzed using the FE-SEM/ EDS. The angle and methylene blue degradation efsciency were measured for evaluating the photocatalytic activity of the $TiO_2$ film. Finally, the antifungal activity of the specimen was tested. Candida albicans KCTC 7629(1 ml, initial concentration $10^5$ cells/ ml) were applied to the experiment and control group specimens and subsequently two UVA light source with 10W, 353 nm peak emission were illuminated to the specimens from 15cm above. The extracted $2{\mu}l$ of sample was plated on nutrient agar plate ($Bacto^{TM}$ Brain Heart Infusion; BD, USA) with 10 minute intervals for 120 minute, respectively. It was incubated for 24 hours at $37^{\circ}C$ and the colony forming units (CFUs) were then counted. Results. Compared the characteristics of LT photocatalyst with commercial P-25 photocatalyst, LT were shown higher activity than P-25. The LT coated experimental specimen surface had anatase crystal form, less than 20 nm of particle size and wide specific surface area. To evaluate the photocatalytic activity of specimens, methylene blue degradation reaction were used and about 5% of degradation rate were measured after 2 hours. The average contact angle was less than $20^{\circ}$ indicating that the LT photocatalyst had hydrophilicity. In the antifungal activity test for Candida albicans, 0% survival rate were measured within 30 minute after irradiation of UVA light. Conclusion. From the results reported above, it is concluded that the UVA-LT photocatalytic reaction have an antifungal effect on the denture surface Candida albicans, and so that could be applicable to the clinical use as a cleaning method.

파형 복부판이 수평 곡선 I형 거더의 극한 거동에 미치는 영향 (Effects of Corrugated Webs on the Ultimate Behavior of Horizontally Curved I-shaped Girders)

  • 김승준;한택희;원덕희;강영종
    • 대한토목학회논문집
    • /
    • 제33권4호
    • /
    • pp.1327-1336
    • /
    • 2013
  • 본 논문은 파형 복부판이 수평 곡선 I형 거더의 극한 거동에 미치는 영향을 다룬다. 파형 복부판은 기하학적 특성에 따라 플레이트 거더의 비틂 및 뒴 강성 증진을 위해 적용이 가능하다. 그동안 파형 복부판이 일반 직선 거더의 극한 거동에 미치는 영향을 다룬 많은 연구들이 있었으나, 면외 방향 거동이 주요하게 나타나는 곡선 거더의 극한 거동에 미치는 영향에 대한 연구는 거의 이루어지지 않았다. 이 연구에서는 비탄성-비선형 해석을 통해 파형 복부판 수평 곡선 I형 거더의 극한 거동을 다룬다. 본 해석 연구에서는 파형 복부판을 갖는 곡선 거더의 극한 거동에 영향을 미칠 수 있는 기하학적 인자로써, 곡선 거더의 횡방향 비지지 길이와 사잇각, 복부판의 파고 및 파장이 주요 매개변수로 고려되었다. 본 해석 연구를 통해, 각 매개변수 변화에 따른 극한 거동 및 내하력 변화를 분석하고, 일반 판형 복부판이 적용된 거더의 내하력과 비교하여 파형 복부판이 내하력 증진에 미치는 영향을 도출하였다. 본 해석 결과에 따르면, 높은 비틂 및 뒴 강성에 의해 파형 복부판은 곡선 거더의 내하력 증진에 효과적인 것으로 나타났다. 그러나 곡선 거더의 곡률 또는 사잇각이 작은 경우, 파형 판의 아코디언 효과에 의해 오히려 내하력이 감소될 수 있다는 것 또한 나타났다.

전치 유도각의 인위적 증가에 의한 저작근과 하악 운동 양상의 변화에 대한 연구 (A STUDY FOR THE CHANGES OF THE MASTICATORY MUSCLES AND THE MANDIBULER MOVEMENT EFFECTED BY INTENTIONAL INCREASE OF ANTERIOR GUIDANCE ANGLE)

  • 이용식;최부병
    • 대한치과보철학회지
    • /
    • 제36권2호
    • /
    • pp.245-257
    • /
    • 1998
  • This study was performed to measure the changes of the mandibular movement and the masticatory muscular activities - anterior temporal and masseter muscle of both side - reflected by intentional increase of anterior guidance angie. For this study, 5 volunteers (3 males and 2 females with average age of 24.0) were selected. Each volunteer had Angle's classification I and did not have any missing tooth except third molar and any extensive restorations. Metallic guide plate was made at volunteer's working model fabricated by improved dental stone and cemented to the palatal surface of maxillary central incisor using resin cement(Panavia $21^{(R)}$) and then adjusted not to give any occlusal interferences at intercuspal position. The activity of masticatory muscles and the changes of mandibular movement were recorded by EMG and Sirognathograph in Biopak analysing system(Bioresearch Inc., Milwaukee, Wisconsin, USA). Measurement was done at before experiment, immediatley after placement, 1 week after placement, immediately after removal, and 1 week after removal. The results were as follows: 1. Moderate phonetic disturbance and mild headache were occured to 3 volunteers for 2 days after setting and 1 volunteer had positive reaction to percussion and slight midline diastema. But all of these clinical signs were diappeared 1 week after removal and the other volunteer did not have any special clinical sign. 2. In the EMG of the mandibular rest position, the mean value of anterior tempotal muscle was increased immediately after placement(p<0.01) and then decreased 1 week after placement(p<0.05) and increased 1 week after removal(p<0.05) but not recovered as before experiment. The mean value of masseter muscle was decreased during the experiment period. 3. In the EMG during mandibular protrusive movement, all muscular activity was decreased during the experiment period. Reduced activity was not recovered 1 week after removal(p<0.03). 4. During the habitual opening, anteroposterior movement of mandible was decreased immediately after placement(p<0.05) and then increased 1 week after placement but not statistically significant(p>0.1). Vertical movement was not shown significant difference during the experiment period(p>0.1). Lateral movement was decreased immediately after placement(p<0.05) and then increased 1 week after placement but not recovered as before experiment. The opening and closing velocity of mandible was shown minor changes but not statistically significant. 5. During the habitual opening, anteroposterior movement of mandible was decreased 1 week after placement(p<0.05) and then increased immediately after removal and recovered 1 week after removal as before experiment. Vertical movement was not shown significant changes. Lateral displacement of mandible was increased continuously and recovered 1 week after removal. Opening velocity was temporarily increased immediately after removal but recovered and closing velocity was not shown significant changes. 6. During the right side chewing, anteroposterior movement of mandible was increased immediately after removal but recovered and vertical movement was not shown statistically significant results. Lateral displacement and velocity of mandible were not shown significant results. 7. During the left side chewing, the changes of mandibular movement pattern were not shown statistically significant results.

  • PDF

편마비 환자의 앉은 자세에서 일어서기 동작 시 의자 높이와 발의 조건이 생체역학적 요소에 미치는 영향 (The Effects of Chair Height and Foot Condition on the Biomechanical Factors in Sit-to-Stand Movement of Hemiplegic Patients)

  • 김동훈;김택훈;최흥식;노정석;최규환;김기송
    • 한국전문물리치료학회지
    • /
    • 제25권2호
    • /
    • pp.1-12
    • /
    • 2018
  • Background: It is very difficult for hemiplegic patients to effectively perform the sit-to-stand (STS) movements independently because of several factors. Moreover, the analysis of STS motion in hemiplegic patients has been thus far confined to only muscle strength evaluation with little information available on structural and environmental factors of varying chair height and foot conditions. Objects: This study aimed to analyze the change in biomechanical factors (ground reaction force, center of mass displacement, and the angle and moment of joints) of the joints in the lower extremities with varying chair height and foot conditions in hemiplegic patients while they performed the STS movements. Methods: Nine hemiplegic patients voluntarily participated in this study. Their STS movements was analyzed in a total of nine sessions (one set of three consecutive sessions) with varying chair height and foot conditions. The biomechanical factors of the joints in the lower extremities were measured during the movements. Ground reaction force was measured using a force plate; and the other abovementioned parameters were measured using an infra-red camera. Two-way repeated analysis of variance was performed to determine the changes in biomechanical factors in the lower extremities with varying chair height and foot conditions. Results: No interaction was found between chair height and foot conditions (p>.05). All measured variables with varying chair height showed a significant difference (p<.05). Maximum joint flexion angle, maximum joint moment, and the displacement of the center of mass in foot conditions showed a significant difference (p<.05); however the maximum ground reaction force did not show a significant difference (p>.05). Conclusion: The findings suggest that hemiplegic patients can more stably and efficiently perform the STS movement with increased chair height and while they are bare-foot.

Posterior Cervical Fixation with Nitinol Shape Memory Loop in the Anterior-Posterior Combined Approach for the Patients with Three Column Injury of the Cervical Spine: Preliminary Report

  • Yu, Dong-Kun;Heo, Dong-Hwa;Cho, Sung-Min;Choi, Jong-Hun;Sheen, Seung-Hun;Cho, Yong-Jun
    • Journal of Korean Neurosurgical Society
    • /
    • 제44권5호
    • /
    • pp.303-307
    • /
    • 2008
  • Objective: The authors reviewed clinical and radiological outcomes in patients with three column injury of the cervical spine who had undergone posterior cervical fixation using Nitinol shape memory alloy loop in the anterior-posterior combined approach. Materials: Nine patients were surgically treated with anterior cervical fusion using an iliac bone graft and dynamic plate-screw system, and the posterior cervical fixation using Nitinol shape memory loop ($Davydov^{TM}$) at the same time. A retrospective review was performed. Clinical outcomes were assessed using the Frankel grading method. We reviewed the radiological parameters such as bony fusion rate, height of iliac bone graft strut, graft subsidence, cervical lordotic angle, and instrument related complication. Results: Single-level fusion was performed in five patients, and two-level fusion in four. Solid bone fusion was presented in all cases after surgery. The mean height of graft strut was significantly decreased from $20.46{\pm}9.97mm$ at immediate postoperative state to $18.87{\pm}8.60mm$ at the final follow-up period (p<0.05). The mean cervical lordotic angle decreased from $13.83{\pm}11.84^{\circ}$ to $11.37{\pm}6.03^{\circ}$ at the immediate postoperative state but then, increased to $24.39{\pm}9.83^{\circ}$ at the final follow-up period (p<0.05). There were no instrument related complications. Conclusion: We suggest that the posterior cervical fixation using Nitinol shape memory alloy loop may be a simple and useful method, and be one of treatment options in anterior-posterior combined approach for the patients with the three column injury of the cervical spine.

지상시험장비를 통한 우주발사체 고공환경모사 기법 연구 (High-Altitude Environment Simulation of Space Launch Vehicle in a Ground-Test Facility)

  • 이성민;오범석;김영준;박기수
    • 한국항공우주학회지
    • /
    • 제45권11호
    • /
    • pp.914-921
    • /
    • 2017
  • 우주발사체 고공환경모사의 실험적 연구는 우주발사체 발사 및 임무완수에 대한 독자적 기술력 확보를 위해 중요하다. 본 연구는 한국형발사체(Korean Space Launch Vehicle; KSLV-II)의 발사 후 마하수 6을 돌파하는 고도 65 km 조건을 선정하였다. 지상시험장비중 하나인 충격파 터널을 이용하여 고공환경모사를 수행하였다. 유동발달 이후 공기열역학적 특성과 수직 및 경사충격파 확인을 위해 선두부 모델의 정체 압력과 정체 열 유량, 그리고 반구형상 모델의 충격파 이탈거리 측정을 통해 유동검증을 수행하였다. 추가적으로 발사체 측면과 저부면 현상연구에 사용되는 시험모델의 자유류 회복을 위한 충격파 상쇄 기법을 개발 및 검증하였다. 세 가지 유동검증 결과를 통해 이론값과 약 ${\pm}3%$ 이내의 오차를 갖는 정확한 유동이 발달되었음을 확인하였다. 그리고 충격파 상쇄기법을 갖는 천이구간 축소 모델의 경사충격파 경사각과 수평 평판모델의 경사각, 그리고 모델 측면 정압력의 실험값과 이론값의 오차가 각각 2%, 그리고 1% 으로 확인되었으며, 이를 통해 해당 충격파 상쇄 기법의 합리적인 효과가 검증되었다.

진동하는 평판 위의 액적의 형상 진동 및 제거 조건에 대한 연구 (Shape Oscillation and Detachment of Droplet on Vibrating Flat Surface)

  • 신영섭;임희창
    • 대한기계학회논문집B
    • /
    • 제38권4호
    • /
    • pp.337-346
    • /
    • 2014
  • 본 연구는 주기적 강제 진동이 가해지는 표면의 액적 모드 특성과 표면에 놓인 액적의 제거에 대한 조건을 실험적으로 이해하는 것을 목적으로 하고 있다. 액적의 거동을 명확하게 관찰하기 위해 아크릴 표면에 Teflon 코팅을 진행하여 접촉각을 높였고, 히스테리시스는 25도 이내로 진행하여 액적의 거동이 보다 쉽게 진행되도록 하였다. 본 실험은 먼지가 적은 청정실에서 실험이 진행되었다. 제작된 소수성 표면에 놓인 액적의 실제 공진 주파수를 예측하기 위해 이론 및 실험적 해석을 통해 두 접근방법의 타당성을 파악하였으며, 두 개의 초고속카메라를 액적의 상면과 측면에 설치하여 2가지 측면에서 액적의 다양한 형상 변형 특성- 모드 형상, 분리, 미소 액적의 발생, 그리고 좌우 비틀림의 특성을 관찰하였다. 이론 값 비교결과 실제 공진 주파수 값들의 차이가 약 18% 이하로 관찰되었으며, 이러한 차이는 접촉선 마찰, 비선형 벽 고착, 실험의 불확실성 등에 가장 큰 영향을 받는 것으로 판단된다. 사용된 스피커에 상대적으로 낮은 전압을 인가할 경우 액적의 접촉선은 고정된 상태에서 좌우 대칭적인 액적 형상진동이 나타났다. 반면, 높은 전압을 인가할 경우 액적의 접촉선은 비고정된 상태가 되면서 더 활발한 형상 진동이 나타났다. 가진 주파수가 모드 주파수와 일치할 경우에는 액적의 로브 크기가 주변부 주파수 일 때 보다 비교적으로 컸으며, 같은 전압을 인가 할 경우, 표면에 놓인 액적의 미소 액적 발생 및 완전한 제거는 2차 모드에서만 진행되는 것을 실험을 통해 규명하였다.

젖음성 및 전기저항 측정을 이용한 플라즈마 처리된 단일 탄소섬유 강화 탄소나노튜브-페놀수지 나노복합재료의 계면접착력 향상 (Improvement of Interfacial Adhesion of Plasma Treated Single Carbon Fiber Reinforced CNT-Phenolic Nanocomposites by Electrical Resistance Measurement and Wettability)

  • 왕작가;권동준;구가영;박종규;이우일;박종만
    • 접착 및 계면
    • /
    • 제12권3호
    • /
    • pp.88-93
    • /
    • 2011
  • 페놀수지에 함침된 탄소나노튜브 (CNT)의 최적 분산제조공정은 전기저항 측정으로 구해졌으며, 플라즈마 처리된 탄소섬유와 CNT-페놀수지 나노복합재료간의 계면특성이 전기-미세역학시험법에 의해 연구되었다. 탄소섬유의 젖음성은 플라즈마 처리 후에 현격하게 증가되었다. 탄소섬유와 CNT-페놀수지 나노복합재료의 표면에너지는 Wilhelmy 플레이트 시험법으로 측정되었다. 탄소섬유 표면의 활성화로 인하여 플라즈마 처리 후 전진 접촉각은 $65^{\circ}$에서 $28^{\circ}$로 감소되었다. 이는 정적 접촉각과 상호 일치함을 보여 주었다. 플라즈마 처리된 탄소섬유와 CNT-페놀수지 나노복합재료간의 접착일은 플라즈마 처리전보다 증가하였다. 또한, 계면전단강도와 겉보기 강성도 탄소섬유에 대한 플라즈마 처리로 증가하였다.

Polarimetry of solar system small bodies using the Seoul National University 61cm telescope and TRIPOL

  • Jin, Sunho;Ishiguro, Masateru;Kwon, Yuna Grace;Geem, Jooyeon;Bach, Yoonsoo P.;Seo, Jinguk;Sasago, Hiroshi;Sato, Shuji
    • 천문학회보
    • /
    • 제44권1호
    • /
    • pp.64.2-64.2
    • /
    • 2019
  • It is known that lights scattered by comets and asteroids are partially polarized. From polarimetric observations of those objects, we can investigate physical properties, such as albedos, sizes of cometary dust particles and regolith of asteroids. Since the polarization degrees of those objects highly depend on their phase angles (Sun-object-observer's angles), long-term monitoring observations are required. Moreover, comets show unforeseeable activations (i.e., outbursts) which need follow-up observations to understand the mechanism. In order to realize such monitoring and transient observations, we installed the Triple-Range Imager and POLarimeter (TRIPOL) on the 61cm telescope of Seoul National University (Hereafter, SNU) Gwanak campus. With this combination, we can obtain g', r', i' bands photopolarimetric images simultaneously with $8.0^{\prime}{\times}8.0^{\prime}$ field of view and pixel resolution of 0.94" pixel-1. Here, we make a presentation regarding the photometric and polarimetric performances of TRIPOL on the SNU 61cm telescope. In addition, we introduce initial polarimetric results of asteroid and comets with the instruments. First, we determine the limiting magnitudes (defined as magnitudes for S/N=5) of $15.17{\pm}0.06$ (g'-band), $15.68{\pm}0.01$ (r'-band), $16.24{\pm}0.03$ (I'-band), respectively, with total 240-seconds exposure (four 60-seconds exposure images, each was taken at different rotation angle for the half-wave plate). Second, we found that the instrumental polarization is negligibly small, ($-0.32{\pm}0.04%$ in the g', $-0.36{\pm}0.05%$ in the r' and $-0.21{\pm}0.04%$ in the i'-bands), while the polarization efficiencies are large enough to maximize the performance (i.e., $97.52{\pm}0.03%$ in the g', $98.83{\pm}0.02%$ in the r' and $99.15{\pm}0.02%$ in the i'-bands). With the instruments, we made observations of three Jupiter-family comets, 21P/Giacobini-Zinner, 38P/Stephan-Oterma, and 46P/Wirtanen and plan to observe one near-Earth asteroid, (433) Eros, on a trial basis. Especially for comets, we discriminate signals from dust and gas to eliminate gas contamination, which are known to change observed degree of linear polarization, using multi-band images. We confirm that the phase angle dependency of these comets are consistent with previous observations, probably because polarimetric property of Jupiter-family comets are broadly homogeneous unlike asteroids. We will also describe future observation plans using TRIPOL and SNU 61cm telescope.

  • PDF