• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.632-638
• /
• 2022

As Korean coastal activity is high, the incidence of accidents caused by marine waste is extensive. An accident in which marine floating waste ropes and fishing nets are wound around the propeller of a sailing ship is termed "Rope wrapped accident." To prevent such accidents, this study applied the Finite Element Method (F.E.M.) for performance evaluation of the shaver type cutter, commercialized in Korea, through a structural safety review and water tank test. The results demonstrate that all parts constituting the rope cutter were damaged before reaching 0.5s, and the safety factor of each part was found to be at least 2 based on the maximum stress generated compared to the tensile strength. In the basin test, the cutting process of the shaver type rope cutter was reviewed, and the installation angle was set for each case considering that the rope floating in the sea actually enters at various angles. Consequently, as it was successful at cutting in all the cases, it can be concluded that there will be no problem in cutting the rope regardless of the mounted angle of the cutting blade.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.429-429
• /
• 2007

For various applications of liquid crystal displays (LCDs), the uniform alignment of liquid crystal (LC) molecules on treated surfaces is significantly important. Generally, a rubbing method has been widely used to align the LC molecules on polyimide (PI) surfaces. Rubbed PI surfaces have suitable characteristics, such as uniform alignment. However, the rubbing method has some drawbacks, such as the generation of electrostatic charges and the creation of contaminating particles. Thus, we strongly recommend a non contact alignment technique for future generations of large high-resolution LCDs. Most recently, the LC aligning capabilities achieved by ultraviolet and ion-beam exposures which are non contact methods, on diamond-like carbon (DLC) inorganic thin film layers have been successfully studied because DLC thin films have a high mechanical hardness, a high electrical resistivity, optical transparency, and chemical inertness. In addition, nitrogen-doped DLC (NDLC) thin films exhibit properties similar to those of the DLC thin films and a higher thermal stability than the DLC thin films because C:N bonding in the NDLC thin filmsis stronger against thermal stress than C:H bonding in the DLC thin films. Our research group has already studied the NDLC thin films by an ion-beam alignment method. The $SiN_x$ thin films deposited by plasma-enhanced chemical vapor deposition are widely used as an insulation layer for a thin film transistor, which has characteristics similar to those of DLC inorganic thin films. Therefore, in this paper, we report on LC alignment effects and pretilt angle generation on a $SiN_x$, thin film treated by ion-beam irradiation for various N ratios

• 한국균학회소식:학술대회논문집
• /
• 2014.10a
• /
• pp.25-25
• /
• 2014

Three species of Fusarium, F. fujikuroi, F. verticillioides and F. proliferatum, are known to be associated with bakanae disease of rice [1, 2]. F. fujikuroi infects rice flowers and survive in endosperm and embryo of the seeds. Infected seed is an important source of primary inoculum of pathogens [3]. Seeds of rice (Oryza sativa cv. Boramchan) collected from bakanae-infected field were found to be 96% infected with Fusarium sp., 52% with F. fujikuroi, 42% with F. verticillioides, and 12% with F. proliferatum as determined by incubation method and species-specific PCR assays. F. fujikuroi was detected at lemma/palea, endosperm and embryo whereas F. verticillioides and F. proliferatum were recovered only from lemma/palea by means of component plating test. Seed disinfection methods have been developed to control bakanae disease and prochloraz has been most widely used for rice seeds. Two chemicals formulated with prochloraz (PC 1) and prochloraz + hexaconazole (PC 2) that inhibit biosynthesis of ergosterol strongly reduced the incidence of Fusarium spp. on selective media to 4.7% and 2.0%, respectively. Disease symptoms of rice seedlings in nursery soil were alleviated by chemical treatment; seedlings with elongated leaves or wide angle between leaf and stem were strikingly reduced from 15.6 to 3.2% (PC 1) and 0 (PC 2), stem rots were reduced from 56.9 to 26.2% (PC 1) and 32.1% (PC 2), and normal seedling increased from 0.4 to 13.3% (PC 2). Prochloraz has some disadvantages and risks such as the occurrence of tolerant pathogens [4] and effects on the sterol synthesis in animals and humans [5]. For these reasons, it is necessary to develop new disinfection method that do not induce fungal tolerance and are safe to humans and animals. Chlorine dioxide ($ClO_2$), that is less toxic, produces no harmful byproducts, and has high oxidizing power, has been reported to be effective at disinfection of several phytopathogenic fungi including Colletotrichum spp. and Alternaria spp. [6]. Gaseous $ClO_2$ applied to rice seeds at a concentration of 20 ppm strongly suppressed mycelial growth of Fusarium fujikuroi, F. verticillioides and F. proliferatum. The incidence of Fusarium spp. in dry seed with 8.7% seed moisture content (SMC) tended to decrease as the concentration of $ClO_2$ increased from 20 to 40 ppm. Applying 40 ppm $ClO_2$ at 90% relative humidity, incidence was reduced to 5.3% and resulted in significant reduction of disease symptoms on MS media. In nursery soil, stem rot was reduced from 56.9 to 15.4% and the number of normal seedlings increased from 0.4 to 25.5%. With water-soaked seeds (33.1% SMC) holding moisture in the endosperm and embryo, the effectiveness of disinfection using $ClO_2$ increased, even when treated with only 20 ppm for four hours. This suggests that moisture was a key element for action of $ClO_2$. Removal of the palea and lemma from seeds significantly decreased the incidence of Fusarium spp. to 3.0%. Seed germination appeared to decrease slightly by water-soaking at $30^{\circ}C$ because of increased SMC and by physical damage of embryos from hulling. These results indicate that the use of gaseous $ClO_2$ was effective as a means to disinfect rice seeds infected with Fusarium spp. and that moisture around the pathogens in the seed was an important factor for the action of $ClO_2$. Further investigations should be conducted to ascertain the best conditions for complete disinfection of Fusarium spp. that infect deep site of rice seeds.

• Korean Journal of Poultry Science
• /
• v.49 no.4
• /
• pp.199-210
• /
• 2022

This study was conducted to investigate the effects of the type and number of enrichments on growth performance, blood characteristics, footpad dermatitis (FPD) incidence, and litter moisture in broilers. A total of 1,140 1-day-old male Ross 308 broilers were assigned to a 3 × 2 factorial arrangement based on the type of enrichment (cabbage, alfalfa block, and angle sawdust) and the number of enrichments (one or two per 38 broilers). The growth performance, blood characteristics, FPD incidence, and litter moisture of the broilers were evaluated. Body weight and feed conversion rate were significantly improved (P<0.05) in the alfalfa block and sawdust group compared to the cabbage group, but there was no interaction effect between the type and number of enrichments. The heterophil/lymphocyte ratio, a stress index, was significantly decreased (P<0.05) in the alfalfa block and sawdust groups compared with the cabbage group. The incidence of FPD was significantly decreased in the order of cabbage (3.78), alfalfa block (3.06), and sawdust (1.43) groups at 5 weeks of age. Moreover, there was a significant decrease in the incidence of FPD (P<0.05) in the one-enrichment group compared with the two-enrichment group. Litter moisture at 5 weeks of age was significantly reduced in the sawdust group compared to the cabbage and alfalfa groups, but there was no significant difference in the interaction between the type and number of enrichments. It was concluded that sawdust enrichment positively influenced both growth performance and the animal welfare of broilers. In addition, it is expected that sawdust can be used to regulate litter moisture.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.127-133
• /
• 1998

An impacted tooth is defined pathologically as a tooth that remains under the mucosa of inside bone without eruption of the crown after a specific period of eruption. Clinically, the term includes those teeth, even before eruption period, that are not expected to erupt due to shape, position and alignment of tooth and lack of space. Canine is prone to impaction more than other teeth because it has the longest time to develop and a complex route from the place of formation to the site of eruption. The impaction incidence of maxillary canine is repoted 0.92$\sim$3.3% (Ferguson, 1990). In 1995 Orton reported that the incidence was 0.92$\sim$2.2% and palatal impaction was more frequent than labial impaction(85%:15%). In 1969 Johnston presented it was more common to woman than to man(3:1). The etiology includes systemic disease such as endocrine disorder, cleidocranial dysostosis, irradiation, Crouzon syndrome, ricketts, facial hemihypertrophy and hereditary and local problems such as ectopic position of the tooth, distance of tooth from its place of eruption, malformation of the tooth, presence of supernumerary teeth, trauma of tooth germ, infection of tooth germ, displacement of tooth germ or tooth by a neoplasm, ankylosis, overretention of deciduous predecessor, lack of space for the tooth in the dental arch and mucosal barrier due to gingival fibrosis. The maxillary canine is especially important as it has the longest root, provides guidance for lateral movement of the mandible and masticatory function and assumes an important role esthetically as it is located at mouth angle. If left untreated, it may cause migration and external, internal resorption of adjacent teeth, loss of arch length, formation of dentigerous cyst or tumors, infection and referred pain as well as malposition of the tooth. Therefore, periodic examination of the development and eruption of the maxillary canine is especially important in a growing child. This case study presents the results of treatment of palatally impacted maxillary canine utilizing surgical exposure and orthodontic tooth movement on patients visiting SNUDH dept. of pediatric dentistry.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.4 no.1
• /
• pp.45-57
• /
• 1974

This report based on 300 cases of serious diseases in maxillofacial region by radiograms seen at the department of dental radiodontics, infirmary school of dentistry, Kyung Hee University from October 1971 to August 1974. The maxillofacial diseases were analysed upon the following items, such as 1) the frequency of dominant diseases, 2) sex-ratio of male to female, 3) predominant region of diseases, 4) comparison with the age, 5) the incidence of diseases in relative to the individual teeth. The results were obtained as follows. 1) Among the total of 300 cases of the patients, the frequency of dominant diseases of patients were fractures of facial bone (44.3±2.87%), inflammatory diseases (22.7±2.39%), cysts (11.1±1.62%), tumors (10.7±1.77%), maxillary sinusitis (7.9±1.56%), temporomandibular joint disorders(3.3±1.05%) in the order. 2) The ex-ratio of male to female in occurence of jaw fractures were 7.3:1, temporomandibular joint disorders were 2.1:1, inflammatory diseases were 1.8:1, maxillary sinusitis were 1.7:1, but tumors were equal to 1:1, while cysts were 1:1.2 in sex difference. 3) The predominant region of mandibular fractures were symphysis(17.3±3.27%), canine region (15.0±3.09%), and angle region (14.3:±3.04%) in the order. Inflammatory diseases were occured frequently in mandible and it's left side were a little dominant. Odontogenic cysts were observed frequently in maxilla, but regardless of right and left. Carcinomas were involved most frequently in maxilla, while sarcomas and ameloblastomas in mandible. Frequency of the maxillary sinusitis were dominant right side and molar area, also temporomandibular joint disorders were right side. 4) To study comparison with the age jaw fractures showed the highest ratio at the 2nd decade(32.3±4.06%), and 3rd decade (27.8±3.89%), 4th decade (19.6±3.44%), 6th decade (9.0±2.47%), 5th decade(6.0±2.06%), 1st decade (5.3±1.95%) in the order. But 7th decade were not involved entirely. Frequency of the inflammatory diseases were the highest in the age group of 3rd decade (28.0±5.44%), and those of cysts were 5th decade (24.2±7.22%), temporomandibular joint disorders were 3rd decade (60.0±15.49%). Tumors were occured frequently over the 4th decade especially malignint tumors over the 5th decade, but maxillary sinusitis were rearless of age except for 2nd decade. 5) About the incidence of diseases in relative to individual teeth, fractures of facial bone were most frequently involved the maxillary and mandibular anterior teeth, and mandibular 3rd molar region. Cysts were maxillary anterior region inflammatory diseases were mandibular molar region maxillary sinusitis were maxillary 1st molar, region but tumors were regardless of individual teeth.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.1
• /
• pp.34-42
• /
• 2004

The appropriate care to the dental emergency patients is much important in the aspect of community dental service. To attain such a purpose, the sacred duty of the training of oral and maxillofacial surgeons is required. So, a retrospective study on the characteristics of dental injuries and diseases in emergency care unit will be very meaningful. This study was carried by reviewing the charts and radiographic films of 3,394 patients, treated for dental emergency at Wonju Christian Hospital, Republic of Korea, from January 1, 1993 to December 31, 2002. All patients were classified to 6 groups including trauma, toothache, infection, hemorrhage, TMJ disorder and the others. The clinical characteristics of diseases and treatment modalities according to each group were analyzed. The trauma (73.9%) was the most frequent cause in dental emergency patients, and acute toothache, odontogenic infection, oral hemorrhage, and TMJ disorder were next in order. Gender prediction was male (68%), there were many patients on May and December in the monthly frequency, and the most frequent age group was from 0 to 9 years. In the trauma group, male (68.6%) was predominant, and soft tissue injuries and primary closures were the most frequent type of injury and treatment. In jaw fractures, traffic accidents were the most cause and the weakest site was mandibular symphysis area, and mandibular angle, condyle, and body area were next in order. In the acute toothache group, the cause was dental pulpitis mostly and treatment for that was drug administration mainly. Buccal space abscess in infection group had the largest incidence (24.5%), and common treatments were incision and drainage and medications. In the hemorrhage group, a major cause was postoperative bleeding (60.3%) and hemostasis was obtained by pressure dressing, curettage and suture. For the TMJ disorder group, the peak incidence (63.8%) was shown in the post-traumatic myofascial pain dysfunction syndrome and its primary care was medication such as analgesics and sedatives. In the other group, the various specific symptoms were complained due to acute sialadenitis, trigeminal neuralgia, acute stomatitis, chemical burn, terminal stage neuritis of head and neck cancer, and foreign body aspiration. In conclusion, for the rapid and proper care of the emergency dental diseases, well-trained education should be presented to the intern and resident course of oral and maxillofacial surgery. And it is demanded that oral and maxillofacial surgeons must be prepared in knowledge and skill for such emergency care.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.412-418
• /
• 2014

In this paper, for better boarding performance and pleasant boarding sensitivity of the ship, comparison and analysis was performed of motion sickness questionnaire with MSI(Motion Sickness Incidence) calculation based on ship motion theory(Strip Method) due to sea condition, incident angle in main sail way, economic speed, and calculation position of the training ship Kaya of Pukyong National University. On theses works, the rougher sea conditions became, the higher total motion sickness rate was occurred. The weights of vertical acceleration and the rates of MSI were higher at the bridge and the accommodation, which were located farther from the center of gravity of the ship. And effects of the vertical acceleration of the ship were increased in rolling then in head sea. In comparison between motion sickness questionnaire with MSI calculation, when the vertical acceleration increased, the motion sickness rate increased. The location to increase vertical acceleration and the location to cause motion sickness were agreed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.4
• /
• pp.354-361
• /
• 2004

This Paper describes a crack scattering model for SH wave based on the boundary integral equation(BIE) method, where the fundamental unknown is crack opening displacement(COD). When a time harmonic plane wave was incident on a 2-D isolated crack (slit) of width 2a, the COD distributions were numerically calculated as a function of ka. The calculated COD agreed well with results obtained with other methods. The far-field scattering amplitude, which completely characterizes the flaw response, was calculated in two ways. The Kirchhoff approximation and the BIE-COD exact formulation were compared in terms of incidence angle and frequency ka in a pulse-echo mode. Maximum response was obtained for both methods at the specular reflection direction. Away from the specular direction, the Kirchhoff approximation becomes less accurate. The time domain crack response was also calculated using a band-limited spectrum of center frequency 10 MHz. At oblique incidence to the crack both methods show the existence of an antisymmetric flash points occurring from the crack edge. The Kirchhoff approximation provides an exact time interval between flash points, although it unrealistically gives the same amplitude.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.38-48
• /
• 2011

Purpose: Dentists suffer back, neck and shoulder pain during their careers due to bad operating posture. If dentists have a good operating posture ergonomically, there would be less pain and discomfort in the shoulder and back. Therefore, dentists should learn the Home position which enables dentists to approach a stable posture ergonomically. This study was to compare tooth preparation in the Home position and the Random position, and evaluate the clinical efficacy of the Home position. Materials and methods: Tooth preparation for fixed partial denture was performed on the maxillary left 2nd premolar and maxillary left 2nd molar at the two different operating positions were compared. The amount of occlusal reduction, marginal width, subgingival margin depth, and convergence angle were measured. A T-test was performed separately to compare the results of the Random position and the Home position. Results: 1. The amounts of average thickness of occlusal reduction on fossa were deficient to the ordered ones in the Random position and the Home position (P > .05). 2. The average subgingival margin depth of prepared margin on maxillary left 2nd premolar, maxillary left 2nd molar were excessive in the Random position than in the Home position. On the maxillary left 2nd premolar, there was no statistical difference in the Random position and the Home position except Distal midline, DL line angle, Lingual midline, ML line angle (P< .05). On the maxillary left 2nd molar, there was no statistical difference in the Random position and the Home position (P < .05). 3. Average convergence angle in the Random position and the Home position were excessive compared to the ordered angle. There was no statistical difference in the Random position and the Home position (P > .05). 4. Analysis of pearson correlation : In the Random position, the amounts of average thickness of occlusal reduction, the average subgingival margin depth of prepared margin, convergence angle were significantly associated with each other (P < .05). But in the Home position, they were not significantly associated with each other (P < .05). 5. The time needed for preparation in the Home position was faster or equal than that of the Random position as time went on. Conclusion: In conclusion, there were no significant differences between Home position and Random position in measures of occlusal reduction, marginal width, marginal depth, convergence angle. However, preparation time and incidence of damaging adjacent teeth were less in Home position than in Random position. Therefore, if trained properly, Home position which is more ergonomically stable can be adopted for clinical use.