• 대한소아치과학회지
• /
• 제28권1호
• /
• pp.95-105
• /
• 2001

두개저의 길이와 폭경 그리고 굴곡의 정도는 그 하부 구조물인 상악골을 포함한 비상악복합체 및 하악골의 길이와 폭경 그리고 전후방적 위치를 결정짓는 중요한 요인으로 역할하며, 이에 따른 안면골의 다양한 구조물들 간의 구조적 관계는 각기 다른유형의 부정교합관계를 형성하는 것으로 알려져 있다. 측두방사선 계측학에서 두개저의 열리고 닫힘을 표현하는 계측치로 흔히 사용되는 안장각(N-S-Ba, N-S-Ar) 또는 중두개저각$({\angle}MCF)$ 등과 I급과 III급 부정교합을 보이는 어린이들의 안면골 계측치 간의 구조적 관계를 평가하여 두개저의 굴곡정도가 안면골을 구정하는 각 구조물과 부정교합 유형과의 관계를 구명하고자 하였다. 이를 위하여 $7\sim12$세 사이의 I급과 III급 부정교합을 보이는 어린이의 측두 규격방사선사진(208매)을 계측하여 통계적으로 비교, 평가한 결과, 안장각보다는 중두개저각이 안면골의 구조과 부정교합의 유형과 밀접한 관계를 지니고 있으며, 특히 III금 부정교합 어린이의 중두개저각과 안면골의 각 구조물들은 $9\sim11$세 사이에 뚜렷한 변화를 나타내는 것으로 가늠된다.

• 대한치과교정학회지
• /
• 제44권5호
• /
• pp.254-262
• /
• 2014

Objective: The purpose of this study was to evaluate the relation between idiopathic scoliosis and facial deformity in the horizontal, vertical, and anteroposterior planes. Methods: A total of 123 female patients aged 14 years or older, who visited the Spine Clinic at the Department of Orthopedics, Korea University Guro Hospital for treatment of idiopathic scoliosis, were enrolled. Whole-spine anteroposterior and lateral radiographs were taken with the patient in a naturally erect position, and frontal and lateral cephalograms were taken in an erect position with the Frankfort horizontal line parallel to the floor. Scoliosis was classified according to the Cobb angle and Lenke classification of six curve types. Cephalometric tracing in all cases was carried out with V-Ceph 5.5 by the same orthodontist. The Kruskal-Wallis test was performed to determine whether any relation existed between each group of the idiopathic scoliosis classification and the cephalometric measurements of frontal and lateral cephalograms. Results: The measurements did not reveal any significant association between the Cobb angle and cephalometric measurements and between the curve type based on the Lenke classification and cephalometric measurements. Conclusions: Based on the results of this study, no apparent relation was observed between the severity of scoliosis and facial form variations in idiopathic scoliosis patients.

• 복식문화연구
• /
• 제16권3호
• /
• pp.502-517
• /
• 2008

The purpose of the study lies in the measurements of breast shapes and upper body types for the women in their 40's, with the use of 3D measurement system, and in the presentation of brassiere patterns fit for their body types. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The findings of the study indicated that the evaluation of experiment brassieres was excellent in every item, and he significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup art. The pattern comparison showed the differences in the parts of total cup angle, cup circumference length, lower cup height, wing length, and wing angle.

• Physical Therapy Rehabilitation Science
• /
• 제6권1호
• /
• pp.7-13
• /
• 2017

Objective: The aim of this study was to investigate the inter-rater and intra-rater reliability of rehabilitative ultrasound imaging (RUSI) for measurement of muscle thickness with changes in angles of the gluteus maximus (GM) at rest and during contraction. Design: Cross-sectional study. Methods: Twenty-two healthy men volunteered for this study. GM muscle images were obtained in the resting position and during prone hip extension with knee flexion at hip abduction angles of $0^{\circ}$ and $30^{\circ}$, respectively. Two examiners randomly measured the thickness of the GM twice in three different positions. The first position was a comfortable prone position. The second position was prone hip extension with knee flexion (PHEKF) to $90^{\circ}$. The third position was achieved by hanging a 1-kg weight on the ankle of the lifted leg during PHEKF with the angle of the lifted leg the same as the second position. Intra-class correlation coefficients (ICCs), standard error measurements, and minimal detectable changes were used to estimate reliability. Results: The intra-rater reliability ICCs (95% confidence interval) of the GM were >0.870, indicating good reliability. Inter-rater reliability ICCs ranged from 0.668 to 0.913. The reliability of measurements of muscle thickness at each position was similar to the reliability of the angle change. Differences in muscle thickness and ratios for each position with $0^{\circ}$ and $30^{\circ}$ of hip abduction were not statistically significant. Conclusions: In the present study, the intra-rater reliability of muscle thickness measurements of the GM was good, and the inter-rater reliability was moderate to good. Reliable RUSI measurements of wide and large muscles, such as the GM muscle at rest and during contraction, are feasible. Further investigation is required to establish the reproducibility of the protocols presented in this study.

• 대한물리의학회지
• /
• 제12권1호
• /
• pp.43-49
• /
• 2017

PURPOSE: This study investigated the relationship among hip adduction angle, tibial rotation, and ITB length during an Ober test to determine the most appropriate position for performing the test. METHODS: The study included thirty-nine asymptomatic participants (23 males, 16 females). Their hip adduction angles were measured using the Ober test during three tibial rotation conditions (internal tibial rotation, external rotation, and neutral position). ITB length was calculated by measuring the position of the patella to lateral femoral condyle using ultrasonography (patella-condyle distance; PCD). RESULTS: The relationship among hip adduction angle, tibial rotation, and ITB length was analyzed under the three conditions using the Pearson correlation. The hip adduction angle of the internal tibial rotation, the external rotation, and the neutral position were significantly related to ITB length. Moreover, the hip adduction angle measured during the internal tibial rotation had the highest correlation with ITB length among the three conditions (r=.58, p<.001). CONCLUSION: Internal tibial rotation caused by the Ober test led to increased iliotibial band (ITB) tension and a decreased adduction angle. These findings support that tibial rotation influences the flexibility of ITB. Therefore, therapists should consider the position of the internal tibial rotation when taking measurements using an Ober test.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권6호
• /
• pp.274-278
• /
• 2005

Voltage transformer(VT) comparison measurement system is usually used for measurements of ratio error and phase angle error of VT made in industry. Both ratio error and phase angle error in VT are critically influenced by values of burden of VT used. External burden effects on both ratio error and phase angle error in VT are theoretically calculated. From the theoretical calculation, a method of evaluation for linearity of ratio error and phase angle error in VT measurement system have been developed using the standard capacitive burdens, with negligible dissipation factor less than 10$^{-4}$. These burden consists of five standard capacitors, with nominal capacitance of 1.1 $\mu$F, 1 $\mu$F, 0.1 $\mu$F, 0.01 $\mu$F, 0.001 $\mu$F. The developed method has been applied in VT measurement system of industry, showing in good consistency and linearity within 0.001 $\%$ between theoretical and measured values.

• 제어로봇시스템학회논문지
• /
• 제21권10호
• /
• pp.944-950
• /
• 2015

Recent studies on ankle-foot prostheses used for transtibial amputees have focused on the adaptation of the ankle angle of the prosthesis according to ground conditions. For adaptation to various ground conditions (e.g., incline, decline, and step conditions), ankle-foot prostheses should first recognize the ground conditions as well as the current human motion pattern. For this purpose, the ground reaction forces and orientation angle of the tibia provide fundamental information. The measurement of the orientation angle, however, creates a challenge in practice. Although various sensors, such as accelerometers and gyroscopes, can be utilized to measure the orientation angles of the prosthesis, none of these sensors can be solely used due to their intrinsic drawbacks. In this paper, a time-varying complementary filtering (TVCF) method is proposed to incorporate the measurements from an accelerometer and a gyroscope to obtain a precise orientation angle. The cut-off frequency of TVCF is adaptively determined according to the human gait phase detected by a fuzzy logic algorithm. The performance of the proposed method is verified through experiments.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.55.2-55.2
• /
• 2011

This research aims to study the effects of the incidence angle and surface temperature on the power generation performance of a thin-film CIGS solar cell for solar powered unmanned aerial vehicles (UAVs). The test rig consists of a unit CIGS solar cell is installed on a table whose angle is controlled manually. A K-type thermocouple is attached to the solar cell surface for temperature measurements. A solar module analyzer measures the voltage and current generated from the test solar cell. The solar module analyzer also calculates the maximum solar power and efficiency of the solar cell. All test data are acquired in a PC. Test results show that the solar cell efficiency decreases significantly with increasing incidence angle and increasing surface temperature in general. As the incidence angle increases from 0 degree to 90 degree, the solar cell efficiency decreases by 60%. The solar cell efficiency decreases by 10% with increasing solar cell surface temperature from $20^{\circ}C$ to $30^{\circ}C$, for exmaple. The direct cooling method of the solar cell using dry ice decreases dramatically the solar cell surface temperature, thus increasing the solar cell efficiency by 15%.

• 대한치과교정학회지
• /
• 제29권4호
• /
• pp.503-510
• /
• 1999

이 연구의 목적은 II급 부정교합의 치료를 위해 경부견인 헤드기어(cervical pull headgear)를 사용할 때, 치료에 불리한 요인으로 작용한다고 언급되는 효과들이 실제로 발현되는지의 여부와 안모의 성장유형에 따라 그 차이가 존재하는 지를 알아 보고자 함에 있다. 이를 위해서 삼성서울병원 치과교정과에서 II급 부정교합으로 진단되어 경부견인 헤드기어로 치료받은 환자중, 성장기에 있으면서 비발치 치료를 받은 환자를 연구대상으로 선별하였다. 그리고 연구대상을 "후안면/전안면 고경비" 에 따라 수직성장군과 수평성장군으로 분류하였다. 수직성장군 15명(남자 5명, 여자 10명)과 수평성장군 11명(남자 4명, 여자 7명)의 치료전, 후의 두부방사선규격사진상에서 SN-PP angle, SN-GoGn angle, SN-MP angle, PFH/AFH ratio, SN to 6, PP to 6 등을 계측하고, 비교분석하여 다음의 결과를 얻었다. 1)수직성장군에서 구개평면이 전하방으로 경사되었다. 2)수평성장군에서 후안면/전안면 고경비가 증가하였다. 3)수직성장군과 수평성장군 모두에서 하악평면각은 변화하지 않았다. 4)상악대구치의 정출양에 있어서 수직성장군과 수평성장군의 차이는 없었다.

• Journal of Korean Neurosurgical Society
• /
• 제44권3호
• /
• pp.124-130
• /
• 2008

Objective : Our purpose of this study is to compare insertion angles and screw lengths from Roy-Camille, Magerl, and our designed method for cervical lateral mass screw fixation in the Korean population by quantitative measurement of reformatted two dimensional (2D) computed tomography (CT) images. Methods : We selected thirty Korean patients who were evaluated with thin section CT scans and reconstruction program to obtain reformatted 2D-CT images of the transversal plane passing the cranio-caudal angle using three different techniques. We measured the minimum angle to avoid vertebral artery (VA) injury, the ideal angle and depth for bicortical screwing of cervical lateral mass. Morphometric measurements of the lateral masses from C3-C7 were also taken. Results : In all three techniques, the mean safety angles from the VA were less than 8 degrees and the necessary depth of the screw was about 14 mm for safety to the VA and for the bicortical purchase. In our designed technique, the mean $\beta$ angles of each level from C3 to C7 were 29.0. 29.8. 29.5. 26.3. and 23.9 degrees, respectively. Conclusion : Results of this study and data from the literature indicate that differences may exist between the Korean and Western people in the length and angle for ideal lateral mass screw fixation. In addition, our technique needs further cadaveric and clinical study for safety and efficacy for being performed as alternative method for cervical lateral mass fixation.